Briwax Furniture Wax Polish - Clear

1. Product Overview

Briwax is a solvent-based blend of beeswax and carnauba wax, recognized by furniture restoration professionals as a premiere, multi-purpose furniture wax. It is designed to produce a lustrous patina rather than a glossy surface shine. This product is versatile, suitable for use as a finish on new wood or stripped furniture, a reconditioner for old or damaged finishes, a furniture wax for fine furniture and antiques, or an antiquing agent to 'age' newly painted carvings or projects. Tinted waxes can be lightened or removed using the clear wax.

Key Features:

• Briwax Clear/Original 16oz formulation.
• Premiere wax used by furniture restoration professionals.
• Functions as a finish, reconditioner, furniture wax, or antiquing agent.
• Wax prevents oils and salts (fingerprints) from harming the surface finish.
• Helps diminish minor scratches without altering the character or color of the piece.

2. Safety Information

This product contains Toluene, a solvent. Please adhere to the following safety guidelines:

• Ventilation: Always apply Briwax in a well-ventilated area. This means a room with an open window and a fan venting to the outside, or ideally, outdoors. Inadequate ventilation can lead to headaches, throat irritation, and potentially more serious neurological disorders with prolonged exposure.
• Flammability: Briwax is flammable. Keep away from open flames, sparks, and other ignition sources.
• Contact: Avoid prolonged skin contact. Use gloves if necessary. In case of eye contact, flush immediately with water and seek medical attention.
• Ingestion: Do not ingest. If swallowed, seek immediate medical attention.
• Proposition 65 Warning: This product may expose you to chemicals including Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Storage: Store in a cool, dry place, away from direct sunlight and heat. Keep the metal lid tightly closed.

3. Preparation

Proper surface preparation is crucial for achieving the best results with Briwax.

Surface Preparation Steps:

1. Ensure the wooden surface is smooth, dry, and clean. Remove any dust, dirt, or previous finishes that are not compatible.
2. For unsealed wood surfaces, it is recommended to first seal the surface with a product like Briwax Sanding Sealer to improve shine and durability.
3. For antiques and pre-finished furniture, always perform a compatibility check by applying Briwax in a small, inconspicuous area with a clean soft cloth. Observe the result before proceeding with the entire piece.

Image 1: Front view of the Briwax Furniture Wax Polish - Clear can, showing the product name and 'Cleans, Stains and Polishes' tagline.

4. Application Instructions

Follow these steps for effective application of Briwax:

1. Using a lint-free cloth or #0000 steel wool, apply Briwax to the prepared surface.
2. Work the wax thoroughly into the grain of the wood.
3. Allow the wax to dry completely. Drying time may vary depending on environmental conditions and the amount of wax applied.
4. Once dry, buff the surface to the desired luster using a clean, soft cloth.

Image 2: Back view of the Briwax Furniture Wax Polish - Clear can, displaying detailed directions for use and safety warnings.

5. Maintenance

The Briwax finish can be maintained and enhanced through further applications. Regular reapplication will contribute to increased hardness and shine of the treated surface.

6. Troubleshooting and Tips

• Wax Softening: If the ambient temperature is above 65°F (18°C), Briwax may soften and liquefy. To restore it to its original state, simply replace the metal lid and place the can in a cool environment.
• Strong Fumes: The product has strong chemical fumes due to its solvent base. Ensure adequate ventilation as described in the Safety Information section. The fumes typically dissipate quickly after application.
• Waxy Feel After Application: Initially, after drying, the surface might retain a waxy, candle-like feel. This is normal. The wax will continue to cure over several weeks, and the waxy feel will diminish, resulting in a hard, matte finish.
• Water Resistance: Once cured, Briwax provides a protective layer that can cause water to bead up, allowing for easy wiping without damaging the finish.
• Not for Water Contact: This product is not recommended for use in areas where it will come into constant contact with water.

7. Specifications

8. Warranty and Support

Specific warranty information for Briwax Furniture Wax Polish - Clear is not provided in the product details. For any product-related inquiries or support, please refer to the manufacturer's official website or contact their customer service directly.

Manufacturer: Briwax