1. Introduction
This manual provides essential information for the safe and proper installation, operation, and maintenance of your Wagner H6024 60240 Miniature Automotive Light Bulb. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
- Electrical Hazard: Always disconnect the vehicle's battery or turn off the ignition before attempting to install or replace any automotive light bulb to prevent electrical shock or short circuits.
- Burn Hazard: Light bulbs can become extremely hot during operation. Allow the bulb to cool completely before handling.
- Eye Protection: Wear appropriate eye protection when working on vehicle electrical systems.
- Handle with Care: Avoid touching the glass portion of the bulb with bare hands. Oils from your skin can create hot spots and reduce bulb lifespan. Use clean gloves or a cloth.
- Correct Replacement: Always replace bulbs with the correct type and wattage specified by the vehicle manufacturer to ensure proper function and avoid damage to the vehicle's electrical system.
3. Product Overview
The Wagner H6024 60240 is a miniature incandescent automotive light bulb designed for specific vehicle applications. It provides reliable illumination for its intended purpose within the vehicle's lighting system.
Figure 1: Wagner H6024 60240 Miniature Automotive Light Bulb. This image shows the full view of the Wagner H6024 60240 bulb, highlighting its PAR56 shape and the electrical connectors at the base. The brand "WAGNER" and model "H6024 DOT 12V 33 10" are visible on the bulb's casing.
4. Specifications
| Feature | Specification |
|---|---|
| Brand | Wagner |
| Model Number | 60240 (H6024) |
| Voltage | 12.8 Volts (Nominal 13 Volts) |
| Wattage | 65/35 Watts (Dual Filament) |
| Bulb Shape Size | PAR56 |
| Part Number | 60240 |
| UPC | 046135602405 |
5. Installation
Installation procedures vary significantly depending on the vehicle make, model, and the specific light assembly. Always consult your vehicle's owner's manual for detailed instructions. The following are general guidelines:
- Prepare the Vehicle: Ensure the vehicle is turned off and the ignition key is removed. For headlights, it is often recommended to disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
- Access the Bulb: Locate the light assembly containing the bulb to be replaced. This may require opening the hood, removing trim panels, or accessing from behind the wheel well.
- Remove Old Bulb: Carefully disconnect the electrical connector from the old bulb. Then, unclip or twist to remove the old bulb from its housing. Note how the old bulb was oriented.
- Install New Bulb: Holding the new Wagner H6024 60240 bulb by its base (avoid touching the glass), insert it into the housing, ensuring it is correctly seated and oriented. Secure it with any clips or twists.
- Reconnect Electrical Connector: Firmly attach the electrical connector to the new bulb.
- Test Functionality: Reconnect the vehicle's battery (if disconnected) and test the light function before reassembling any removed panels or covers.
- Reassemble: Replace any panels or covers removed during the installation process.
If you are unsure about any step, it is recommended to seek assistance from a qualified automotive technician.
6. Operation
The Wagner H6024 60240 light bulb operates automatically as part of your vehicle's lighting system when the appropriate switch or control is activated. Ensure your vehicle's electrical system is functioning correctly for optimal bulb performance.
7. Maintenance
The Wagner H6024 60240 is a sealed unit and requires no user maintenance. If the bulb ceases to function, it should be replaced with a new bulb of the same specifications. Regularly inspect your vehicle's lighting for proper operation as part of routine vehicle maintenance.
8. Troubleshooting
- Bulb Does Not Light:
- Check the electrical connection to ensure it is secure.
- Verify that the vehicle's fuse for that lighting circuit is intact and not blown.
- Confirm that the correct voltage is being supplied to the bulb socket.
- If all connections and power supply are correct, the bulb may be faulty and require replacement.
- Dim or Flickering Light:
- Inspect for loose or corroded electrical connections.
- Check the vehicle's charging system and battery for proper voltage output.
- A dim or flickering light can also indicate an aging bulb nearing the end of its lifespan.
For persistent issues, consult a professional automotive technician.
9. Warranty and Support
For information regarding the warranty of your Wagner H6024 60240 Miniature Automotive Light Bulb, please refer to the documentation provided at the time of purchase or contact the retailer. Specific warranty terms and conditions are subject to the manufacturer's policy.
For further technical assistance or support, please visit the official Wagner website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
