1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your hansgrohe Raindance S Air Infusion Showerhead, Model 27495001. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

Figure 1: hansgrohe Raindance S Air Infusion Showerhead, Chrome finish.
2. Safety Information
Observe all local plumbing and building codes. Wear appropriate personal protective equipment (PPE) during installation, such as safety glasses and gloves. Ensure the water supply is turned off before beginning any installation or maintenance work. Avoid using abrasive cleaners or scouring pads, as these can damage the finish of the showerhead.
3. Package Contents
Verify that all components are present before beginning installation:
- hansgrohe Raindance S Air Infusion Showerhead (Model 27495001)
- Installation Instructions
If any parts are missing or damaged, please contact hansgrohe customer support.
4. Installation
hansgrohe recommends that a licensed plumber install this product to ensure proper function and adherence to local codes.
4.1 Pre-Installation
- Turn off the main water supply to the shower area.
- Remove your existing showerhead by unscrewing it counter-clockwise from the shower arm.
- Clean any old sealant or debris from the threads of the shower arm.
4.2 Showerhead Installation
- Apply plumber's tape (not included) clockwise around the threads of the shower arm.
- Screw the hansgrohe Raindance S Showerhead onto the shower arm by hand, turning clockwise until snug.
- Using an adjustable wrench, tighten the showerhead an additional quarter to half turn. Do not overtighten.
- Turn on the main water supply and check for leaks. If leaks occur, tighten slightly more or reapply plumber's tape.

Figure 2: Showerhead dimensions and G 1/2 inch connection details.
The showerhead features an easy adjust positioning with a 26-degree range, allowing you to angle the spray as desired after installation.
5. Operation
Your hansgrohe Raindance S Showerhead offers three distinct spray modes: RainAir, BalanceAir, and WhirlAir. These modes can be selected by rotating the spray disc on the face of the showerhead.
5.1 Spray Modes
- RainAir Spray: A gentle shower rain with air-enriched drops. This mode provides a soft, full spray for a relaxing experience.

Figure 3: RainAir spray, a gentle, air-enriched rain.
- BalanceAir Spray: A harmonious combination of gentle shower drops and invigorating massage spray. This mode offers a balanced water flow for a refreshing sensation.

Figure 4: BalanceAir spray, combining gentle and invigorating streams.
- WhirlAir Spray: A dynamic, revitalizing massage spray. This powerful mode is ideal for targeting specific areas and relieving tension.

Figure 5: WhirlAir spray, a dynamic massage stream.
5.2 Adjusting the Showerhead Angle
The showerhead can be tilted up to 26 degrees in any direction to customize the spray angle to your preference.
6. Maintenance
Regular cleaning and maintenance will ensure optimal performance and extend the life of your showerhead.
6.1 QuickClean Feature
The hansgrohe Raindance S Showerhead is equipped with QuickClean silicone nozzles. Limescale and mineral deposits can be easily wiped off the flexible silicone nozzles with your finger or a soft cloth. This should be done regularly to maintain consistent spray performance.
6.2 General Cleaning
- Clean the showerhead with a soft cloth and a mild soap solution.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Do not use abrasive cleaners, scouring pads, or cleaners containing alcohol, ammonia, or harsh chemicals, as these can damage the chrome finish.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Clogged nozzles due to limescale buildup. | Use the QuickClean feature to wipe away deposits from the silicone nozzles. |
| Water leaking from connection | Improperly sealed connection to shower arm. | Ensure plumber's tape is applied correctly and the connection is tightened appropriately. Do not overtighten. |
| Spray pattern is uneven | Partial clogging of nozzles. | Clean the QuickClean nozzles thoroughly. |
8. Specifications
- Model: 27495001
- Brand: hansgrohe
- Style: Raindance S
- Finish: Chrome
- Material: Brass
- Flow Rate: 2.5 GPM (Gallons Per Minute)
- Number of Spray Modes: 3 (RainAir, BalanceAir, WhirlAir)
- Connection: Standard 1/2-inch
- Adjustable Angle: 26 degrees
- Special Features: Airpower technology, QuickClean feature
- Item Weight: 454 Grams
9. Warranty Information
Hansgrohe, Inc. warrants to the original consumer purchaser that hansgrohe products will be free from defects in material and workmanship for as long as the original consumer purchaser owns both the product and the home in which the product was originally installed. For commercial purchasers, the warranty period is one (1) year from the date of purchase. The warranty period for products in Rubbed Bronze, Matte Black, and Matte White finishes is three (3) years from the date of purchase. This warranty is non-transferable.
This warranty does not cover hansgrohe products purchased from unauthorized sellers, unless otherwise prohibited by law. Authorized sellers can be found on hansgrohe branded websites. Additional warranty restrictions apply. Please refer to the manufacturer's official website for full warranty details.
10. Customer Support
For technical assistance, replacement parts, or warranty claims, please visit the official hansgrohe website or contact their customer service department. You can also visit the hansgrohe Store on Amazon for more product information.
10.1 Official Product Video
Video: Hansgrohe 27495001 Raindance S 150 AIR 3-Jet Shower Head, Chrome. This video demonstrates the features and operation of the showerhead.





