American Standard Evolution Deep Soaking Tub User Manual

Introduction

The American Standard Evolution Deep Soaking Tub is designed to provide a luxurious and comfortable bathing experience. Its generous 18 ½ inch depth allows for total body immersion, while integrated features like dual molded-in armrests and lumbar support enhance relaxation. The tub also includes a slip-resistant floor surface for added safety. This manual provides essential information for the proper setup, operation, and maintenance of your new soaking tub.

Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in injury or product damage.

• Ensure proper electrical grounding if installing a jetted version (not applicable to this model, but general safety).
• Verify all plumbing connections are secure and leak-free before concealing.
• Do not use abrasive cleaners or harsh chemicals on the acrylic surface.
• Always test water temperature before entering the tub to prevent scalding.
• The slip-resistant floor is designed for safety, but caution should always be exercised when entering or exiting the tub.

Product Overview

The American Standard Evolution Deep Soaking Tub is crafted from glossy acrylic with durable fiberglass reinforcement, ensuring longevity and a smooth finish. Key features include:

• Deep and Roomy Design: Provides full body immersion for enhanced comfort.
• Integrated Comfort Features: Dual molded-in armrests and wide contoured lumbar support.
• Slip-Resistant Floor: Textured surface for improved safety.
• Installation Versatility: Suitable for drop-in or undermount installations.
• Pre-leveled Tub Bottom: Simplifies the installation process.

Figure 1: Top-down view of the American Standard Evolution Deep Soaking Tub, highlighting its spacious interior and clean white finish.

Figure 2: Detailed diagram illustrating the key features of the tub, such as the Deep Soak Max Drain compatibility, pre-leveled tub bottom, built-in comfort elements, and durable fiberglass-reinforced acrylic design.

Setup & Installation

Proper installation is crucial for the performance and longevity of your tub. It is recommended that installation be performed by a qualified professional.

Pre-Installation Checklist:

• Verify tub dimensions and ensure adequate space for installation. (Product Dimensions: 72"L x 36"W x 21.5"H)
• Confirm subfloor is level and capable of supporting the tub's weight when filled (Capacity: 111 Gallons).
• Ensure access for plumbing connections (drain and overflow).
• Acquire the required Deep-Soak Max Drain (American Standard 1599.205), sold separately.

Installation Steps (Summary):

1. Prepare the installation area, ensuring it is clean, level, and has proper structural support.
2. Install the Deep-Soak Max Drain assembly according to its specific instructions. This drain allows for a 3" deeper water level than standard drains.
3. Position the tub into the prepared opening (for drop-in installation) or on the prepared base (for undermount installation). The pre-leveled tub bottom simplifies this step.
4. Connect the drain and overflow plumbing, ensuring all connections are watertight.
5. Fill the tub with water and check for any leaks around the drain, overflow, and all plumbing connections. Allow water to stand for a period to confirm no leaks.
6. Once leak-free, complete the surrounding enclosure or tiling as per your design.

Figure 3: Dimensional drawing of the tub, providing key measurements for planning your installation.

Operating Instructions

Using your American Standard Evolution Deep Soaking Tub is straightforward:

1. Ensure the drain stopper is closed.
2. Fill the tub with water to your desired level. The deep design allows for a full 18 ½ inch depth to the overflow.
3. Always check the water temperature before entering to ensure it is safe and comfortable.
4. After use, open the drain stopper to empty the tub.

Maintenance

To keep your American Standard Evolution tub looking its best and functioning properly, follow these maintenance guidelines:

• Cleaning: Clean the tub regularly with a soft cloth or sponge and a non-abrasive, mild liquid cleaner. Rinse thoroughly with warm water after cleaning.
• Avoid Harsh Chemicals: Do not use abrasive powders, scouring pads, or cleaners containing ammonia, bleach, or acids, as these can damage the acrylic surface.
• Stain Removal: For stubborn stains, use a mild household cleaner specifically designed for acrylic surfaces. Test on an inconspicuous area first.
• Prevent Scratches: Avoid dropping sharp or heavy objects into the tub. Do not use the tub as a work surface.
• Drain Maintenance: Periodically remove and clean the drain stopper to prevent buildup and ensure proper drainage.

Troubleshooting

Specifications

• Model: 7236V002.020
• Brand: American Standard
• Color: White
• Material: Fiberglass, Plastic (Acrylic with Fiberglass Reinforcement)
• Product Dimensions: 72"L x 36"W x 21.5"H
• Installation Type: Drop-In or Undermount
• Capacity: 111 Gallons
• Item Weight: 7.2 Pounds
• Required Drain: Deep-Soak Max Drain (American Standard 1599.205), sold separately

Warranty & Support

The American Standard Evolution Deep Soaking Tub comes with a Limited Lifetime Warranty. For detailed warranty terms and conditions, please refer to the official American Standard website or the warranty documentation included with your purchase.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact American Standard Customer Support. Contact information can typically be found on the manufacturer's website or on your purchase receipt.

You can also find additional resources, including installation manuals and user guides, on the product page on Amazon or by visiting the American Standard Store on Amazon.