Introduction
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Hansgrohe Pharo 26871000 Shower Panel Lift 2 M20. Please read this manual thoroughly before installation and use, and retain it for future reference.
Safety Information
Important: Failure to follow these instructions may result in property damage, personal injury, or death. All installation and maintenance work should be performed by qualified personnel.
- Ensure all water supply lines are shut off before beginning installation or maintenance.
- Protect the product from frost.
- Use only genuine Hansgrohe spare parts.
- Observe all local plumbing and building codes.
Product Overview
The Hansgrohe Pharo 26871000 is a shower panel designed for an enhanced showering experience. It features an integrated overhead shower, hand shower, and body jets. This model is designed for manual operation and does not include integrated lighting.
Figure 1: Front view of the Hansgrohe Pharo 26871000 Shower Panel. This image displays the main components including the overhead shower, control knobs, body jets, and the attached hand shower with its hose.
Setup and Installation
Installation of the Hansgrohe Pharo 26871000 shower panel requires careful attention to plumbing connections and mounting. It is recommended that installation be performed by a certified plumber.
Pre-Installation Checks:
- Verify that all necessary components are present in the packaging.
- Ensure water supply lines (hot and cold) are accessible and correctly sized.
- Confirm wall structure can support the weight of the shower panel and water.
Mounting the Shower Panel:
- Mark the desired mounting height and positions for the wall brackets.
- Drill holes and secure the wall brackets using appropriate fasteners for your wall type.
- Connect the hot and cold water supply lines to the panel's inlets. Ensure proper sealing.
- Carefully hang the shower panel onto the secured wall brackets.
- Tighten any securing screws to prevent movement.
Figure 2: Technical drawing illustrating the dimensions and installation requirements for the Hansgrohe Pharo 26871000 Shower Panel. This diagram shows side and front views with measurements in millimeters, as well as details for water inlet connections and mounting points.
Operating Instructions
The Hansgrohe Pharo 26871000 shower panel features intuitive controls for water flow and temperature.
Water Temperature Control:
Rotate the central knob (typically marked with red for hot and blue for cold) to adjust the water temperature. Turn clockwise for colder water and counter-clockwise for warmer water.
Water Flow and Outlet Selection:
The panel includes multiple outlets: overhead shower, hand shower, and body jets. Use the selector knobs or buttons to switch between these functions or activate them simultaneously, depending on the panel's configuration.
- Overhead Shower: Provides a wide, drenching spray.
- Hand Shower: Offers flexibility for targeted rinsing.
- Body Jets: Delivers invigorating massage sprays.
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your shower panel.
Cleaning:
- Clean the surfaces with a soft cloth and a mild, non-abrasive cleaning agent.
- Avoid using cleaners containing alcohol, hydrochloric acid, formic acid, chlorine bleach, or abrasive components, as these can damage the finish.
- For showerheads and jets, regularly rub the silicone nozzles to remove limescale deposits.
Limescale Removal:
In areas with hard water, limescale can build up. Use a descaling solution specifically designed for bathroom fixtures, following the manufacturer's instructions. Rinse thoroughly after cleaning.
Troubleshooting
This section addresses common issues you might encounter with your shower panel.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure | Clogged showerhead/jets, partially closed shut-off valve, general household water pressure issue. | Clean showerhead/jet nozzles. Ensure shut-off valves are fully open. Consult a plumber if household pressure is consistently low. |
| Water temperature inconsistent | Thermostatic cartridge issue (if applicable), hot water supply problem, pressure imbalance. | Check hot water heater. If issue persists, contact a qualified plumber to inspect the thermostatic cartridge. |
| Leaking from connections | Loose connections, worn seals/gaskets. | Ensure all connections are tight. Replace any damaged seals or gaskets. |
If you are unable to resolve an issue using the troubleshooting guide, please contact a qualified plumber or Hansgrohe customer service.
Specifications
- Model: Hansgrohe Pharo 26871000 Shower Panel Lift 2 M20
- Part Number: 26871000
- Brand: Hansgrohe
- Item Weight: 30.9 pounds (approx. 14 kg)
- Package Dimensions: 66.14 x 12.99 x 11.97 inches (approx. 168 x 33 x 30.4 cm)
- Features: Overhead shower, hand shower, body jets (manual operation)
- Date First Available: August 9, 2012
