1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Schell Comfort Secondary Connection Valve, model 033090699. Please read these instructions carefully before beginning installation or use to ensure safe and efficient operation. Retain this manual for future reference.
2. Product Overview
The Schell Comfort Secondary Connection Valve 033090699 is designed for plumbing applications, specifically for secondary connections, often found in toilet systems. It features a chrome-plated surface for durability and aesthetics, and includes a backflow preventer to ensure water quality. This valve is suitable for individual tap points.
Figure 1: Schell Comfort Secondary Connection Valve 033090699. This image displays the chrome-plated valve with its inlet, outlet, and control knob, along with the integrated hose connection at the bottom.
Key Features:
- Chrome-plated surface for enhanced durability and corrosion resistance.
- Integrated backflow preventer to protect against contamination.
- Designed for secondary connections, such as those for toilets or other individual fixtures.
- Includes a hose connection for flexible applications.
3. Setup and Installation
Installation of plumbing components should ideally be performed by a qualified professional to ensure compliance with local plumbing codes and proper functionality. Incorrect installation can lead to leaks or damage.
Required Tools and Materials (Not Included):
- Adjustable wrench or pipe wrench
- Thread seal tape (PTFE tape)
- Bucket or towels for water containment
Installation Steps:
- Turn off Water Supply: Locate the main water shut-off valve for your property or the specific fixture and turn it off completely. Open a nearby faucet to relieve pressure in the lines.
- Prepare Connection Points: Ensure the existing pipe threads are clean and free of debris. Apply thread seal tape clockwise around the male threads of the pipe where the valve will be connected.
- Connect the Valve: Carefully thread the Schell Comfort Secondary Connection Valve onto the prepared pipe. Hand-tighten first, then use an adjustable wrench to tighten an additional 1/4 to 1/2 turn. Avoid over-tightening, which can damage threads or the valve.
- Connect Hose/Fixture: Attach the desired hose or fixture connection to the valve's outlet. Ensure a watertight seal, using thread seal tape if necessary for threaded connections.
- Check for Leaks: Slowly turn the main water supply back on. Carefully inspect all connections for any signs of leaks. If leaks are detected, turn off the water supply, tighten the connection slightly, and re-check.
Note: The integrated backflow preventer ensures water flows in one direction only, preventing contamination of the main water supply. Ensure the valve is oriented correctly according to water flow direction indicators, if present.
4. Operating Instructions
The Schell Comfort Secondary Connection Valve is designed for simple operation to control water flow to a connected fixture.
- To Open the Valve (Allow Water Flow): Turn the control knob counter-clockwise until the desired water flow is achieved. For full flow, turn until it stops.
- To Close the Valve (Stop Water Flow): Turn the control knob clockwise until it stops. This will shut off the water supply to the connected fixture.
Caution: Do not force the control knob beyond its natural stopping points, as this may cause damage to the internal mechanism.
5. Maintenance
Regular maintenance helps ensure the longevity and proper function of your valve.
- Cleaning: Clean the chrome-plated surface with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads, which can damage the finish.
- Leak Checks: Periodically inspect all connections for any signs of leaks. Address any leaks promptly to prevent water damage.
- Operation Check: Occasionally operate the valve (open and close it) to ensure the mechanism moves freely and to prevent mineral buildup.
- Winterization (if applicable): In areas subject to freezing temperatures, ensure the valve and connected pipes are properly drained or insulated to prevent freeze damage.
6. Troubleshooting
This section addresses common issues you might encounter with your secondary connection valve.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leak at connections | Loose connection, insufficient thread seal tape, damaged washer/gasket. | Turn off water supply. Tighten connections. Reapply thread seal tape. Inspect and replace washers/gaskets if damaged. |
| No water flow or reduced flow | Valve not fully open, main water supply off, blockage in pipe or valve. | Ensure valve is fully open. Check main water supply. If problem persists, professional inspection may be required to check for blockages. |
| Valve difficult to turn | Mineral buildup, internal component wear. | Regular operation can prevent buildup. If severe, the valve may need to be replaced. |
If you are unable to resolve an issue using the troubleshooting steps above, please contact a qualified plumber or the manufacturer's support.
7. Specifications
Detailed technical specifications for the Schell Comfort Secondary Connection Valve 033090699.
- Model Number: 033090699
- Manufacturer: Schell
- Part Number: 033090699
- Item Weight: 12 ounces (approx. 340 grams)
- Product Dimensions: 4.8 x 3.23 x 1.81 inches (approx. 12.2 x 8.2 x 4.6 cm)
- Material: Chrome-plated (brass body with chrome finish)
- Features: Integrated backflow preventer, hose connection
- Item Package Quantity: 1
8. Warranty Information
Specific warranty terms for the Schell Comfort Secondary Connection Valve 033090699 are provided by the manufacturer. Please refer to the documentation included with your purchase or visit the official Schell website for detailed warranty coverage, terms, and conditions. Keep your proof of purchase for any warranty claims.
9. Customer Support
For technical assistance, replacement parts, or further inquiries regarding your Schell Comfort Secondary Connection Valve, please contact Schell customer support directly. Contact information can typically be found on the manufacturer's official website or on the product packaging.
Manufacturer: Schell GmbH & Co. KG
Website: www.schell.eu (This is a general link, specific support contact may vary by region)