QuicKutz We R Memory Keepers KS-0601 Bear Die Set Instruction Manual

1. Product Overview

The QuicKutz We R Memory Keepers KS-0601 Bear Die Set consists of two individual dies designed to create a layered bear shape for various paper crafting projects. These 2-by-2 inch dies are suitable for scrapbooking, card making, and other creative applications.

Key Features:

• Two dies are included to construct the complete layered bear shape.
• Compatible with We R Memory Keepers Squeeze and Revolution Tools, as well as most major brand die-cutting machines.
• Dies are lightweight and designed to be thinner than a standard credit card for easy storage and use.
• Designed for creating 2-by-2 inch shapes.

This image displays the finished die-cut shape of a bear, composed of two distinct die pieces. The bear features a textured, light-colored paper, with darker circular accents for eyes and paw pads, indicating the layered design achieved by the dies.

2. Setup

Before using your QuicKutz Bear Die Set, ensure you have a compatible die-cutting machine. This set is designed to work with the We R Memory Keepers Squeeze Hand Tool, the Revolution Tabletop Die-Cutting System, and other major brand die-cutting tools.

Required Materials:

• QuicKutz KS-0601 Bear Die Set
• Compatible die-cutting machine (e.g., Squeeze Hand Tool, Revolution Tabletop System)
• Paper or cardstock of your choice
• Cutting plates/mats (specific to your machine)

3. Operating Instructions

Follow these general steps to use your QuicKutz Bear Die Set. Specific instructions may vary slightly depending on your die-cutting machine model.

1. Prepare Your Machine: Refer to your die-cutting machine's manual for proper plate stacking and setup.
2. Position the Die: Place one of the bear dies onto your cutting plate with the cutting edge facing upwards.
3. Place Paper: Lay your chosen paper or cardstock over the die. Ensure the paper covers the entire cutting area of the die.
4. Add Top Plate: Place the second cutting plate (or appropriate top plate for your machine) on top of the paper and die, creating a "sandwich."
5. Run Through Machine: Carefully feed the assembled sandwich through your die-cutting machine. Turn the crank or operate the lever according to your machine's instructions.
6. Remove Die-Cut: Once processed, remove the plates and carefully separate the die-cut shape from the die and excess paper. A pokey tool may be helpful for intricate details.
7. Repeat for Second Die: Repeat steps 2-6 for the second bear die to create the layered components.
8. Assemble: Adhere the two die-cut pieces together to form the complete layered bear shape.

4. Maintenance

Proper care ensures the longevity and performance of your die set.

• Cleaning: After each use, remove any small paper scraps that may be lodged in the die's intricate areas. A small brush or pokey tool can assist with this.
• Storage: Store dies flat in a dry environment to prevent warping or damage. Magnetic storage sheets or dedicated die storage binders are recommended to keep them organized and protected.
• Avoid Moisture: Keep dies away from excessive moisture to prevent rust, although these dies are generally resistant.

5. Troubleshooting

If you encounter issues while using your die set, consider the following common solutions:

• Incomplete Cut:
  • Ensure your cutting plates are not warped or excessively worn. Replace if necessary.
  • Check your machine's "sandwich" combination. You may need to add a shim (e.g., a piece of cardstock) to increase pressure.
  • Run the die through the machine multiple times, rotating it 90 degrees between passes.
• Paper Sticking to Die:
  • Use a pokey tool or a stiff brush to gently push out the paper from the die.
  • Consider using a dryer sheet to lightly rub over the die before cutting to reduce static.
• Die-Cut Edges are Frayed:
  • This can indicate dull cutting plates. Try flipping your plates or replacing them.
  • Ensure your paper is not too thick for the die and machine combination.

6. Specifications

7. Warranty and Support

Lifetime Service Commitment: This QuicKutz die set is backed by a Lifetime Service Commitment warranty, ensuring long-term reliability and support for your product.

For further assistance, product inquiries, or to claim warranty service, please contact We R Memory Keepers customer support directly. Refer to the manufacturer's official website for the most current contact information.

Manufacturer: We R Memory Keepers