Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Bandai Hobby #11 Over Flag HG model kit. This High Grade (HG) model represents the custom Flag units used by the Union in the anime series Gundam 00. It features a transformable design and includes specific weaponry for dynamic display options.
Image: Fully assembled Bandai Hobby #11 Over Flag HG model kit.
Safety Precautions
- Small Parts: This kit contains small parts that may pose a choking hazard. Keep out of reach of small children.
- Sharp Edges: Some parts may have sharp edges or points. Handle with care during assembly.
- Ventilation: If using paints or adhesives (not required but optional for customization), ensure adequate ventilation.
- Adult Supervision: Adult supervision is recommended for younger builders.
Package Contents
Verify that all components are present before beginning assembly:
- Plastic parts from runners
- Colored plastic parts
- Foil stickers
- Marking stickers
- Linear rifle
- Defense rod
- Sonic blade
- Instruction manual booklet
Assembly Instructions
Required Tools
- Hobby Nipper: Essential for cleanly removing parts from the plastic runners.
General Assembly Guidelines
Follow the step-by-step diagrams provided in the included instruction booklet. Each step will indicate which parts to use and how they connect.
- Part Removal: Use a hobby nipper to carefully cut parts from the runners. Cut slightly away from the part first, then make a second, closer cut to minimize stress marks.
- Snap-Fit Assembly: This kit is designed for snap-fit assembly, meaning no glue is required. Parts should fit together securely with gentle pressure.
- Colored Plastic: The parts are molded in appropriate colors, reducing the need for painting to achieve the model's appearance.
- Stickers: Apply foil and marking stickers as indicated in the instruction booklet for added detail. Use tweezers for precise placement.
Image: Hands demonstrating the assembly of a model kit part.
Image: Close-up view of model kit parts on runners.
Operating the Model
Posing
The Over Flag HG model features articulated joints in its limbs, torso, and head, allowing for a wide range of dynamic poses. Gently manipulate the joints to achieve desired stances. Avoid excessive force to prevent damage to the plastic.
Transformation
This model is capable of transforming into its flight mode. Refer to the specific transformation sequence detailed in the included instruction booklet. Pay close attention to the order of steps and the direction of movement for each part. Some joints may require careful handling during transformation.
Maintenance
- Dusting: Regularly dust your model with a soft brush or compressed air to prevent dust buildup, which can be difficult to remove later.
- Cleaning: For stubborn dirt, gently wipe with a soft cloth dampened with plain water. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or warping of plastic parts.
- Handling: Always handle the model by its main body parts, avoiding delicate accessories or thin protrusions.
Troubleshooting
Loose Joints
If certain joints become loose over time, reducing the model's ability to hold poses, a small amount of clear nail polish or specialized model cement can be applied to the male peg of the joint. Allow it to dry completely before reassembling to increase friction. Apply sparingly to avoid permanent bonding.
Parts Falling Off
Small or frequently handled parts, such as fins, weapons, or armor pieces, may occasionally detach. Ensure they are fully snapped into place. For persistent issues, a tiny drop of model cement can be used to secure the part, but be aware this may make future disassembly difficult or impossible.
Difficulty Posing or Standing
Verify that all joints are correctly assembled and that the model's weight is evenly distributed. Some dynamic poses may require a display stand (sold separately) for optimal stability.
Specifications
| Attribute | Detail |
|---|---|
| Brand | BANDAI SPIRITS |
| Model Name | #11 Over Flag "Gundam 00", Bandai HG 00 |
| Model Number | BAN152378 |
| Item Dimensions (L x W x H) | 20.87 x 24.02 x 15.75 inches |
| Material | Plastic |
| Item Weight | 10.56 ounces |
| Number of Pieces | 1 (refers to the complete kit, not individual parts) |
| Age Range (Description) | Kid |
Warranty and Support
This Bandai Hobby model kit does not typically come with a manufacturer's warranty.
For consumer support regarding authentic licensed items, please refer to Bluefin Distribution. Products bearing the official Bluefin Distribution logo are tested and comply with all U.S. consumer product safety regulations and are eligible for consumer support through their channels.
