1. Introduction
This manual provides essential information for the proper use, installation, and understanding of the Midwest 03925 Zinc Fender Washer. Please read this document thoroughly before use to ensure correct application and safety.
2. Product Overview
The Midwest 03925 is a zinc-plated fender washer designed for applications requiring a large bearing surface. Fender washers are characterized by their large outer diameter in proportion to their center hole, which helps distribute the load over a wider area, preventing pull-through in soft materials or covering oversized holes.
Key Features:
- Material: Alloy Steel with Zinc plating for corrosion resistance.
- Dimensions: 3/16 inch inner diameter, 1 inch outer diameter.
- Application: Ideal for automotive, marine, and general construction where a wide load distribution is needed.
Note: No relevant product images for the Midwest 03925 Zinc Fender Washer were provided in the input data. The images supplied were of a model train carriage and are not applicable to this product.
3. Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Midwest Enterprises |
| Part Number | 03925 |
| Item Model Number | 03925 |
| Item Weight | 1.35 pounds |
| Product Dimensions | 2.06 x 3.19 x 2.37 inches |
| Style | Fender |
| Material | Alloy Steel |
| Measurement System | inch |
| Date First Available | October 16, 2007 |
4. Installation and Application
Fender washers are used to distribute the load of a threaded fastener, such as a screw or nut, over a larger surface area. This is particularly useful when fastening into soft materials like wood or plastic, or when covering an oversized or irregular hole.
- Select Correct Size: Ensure the washer's inner diameter (3/16") matches or is slightly larger than the fastener's shank diameter. The outer diameter (1") should be appropriate for the load distribution required.
- Placement: Place the fender washer directly under the head of the screw or nut.
- Fastening: Tighten the fastener according to the manufacturer's recommendations for the specific bolt/screw and material being joined. Avoid over-tightening, which can damage the material or the washer.
- Material Compatibility: While zinc plating offers corrosion resistance, consider the environment and other materials in contact with the washer to prevent galvanic corrosion.
5. Storage and Handling
To maintain the integrity and performance of your Midwest 03925 Zinc Fender Washers:
- Store in a dry environment to prevent moisture accumulation and potential corrosion, despite the zinc plating.
- Keep washers organized and separated by size to avoid confusion and ensure the correct washer is used for each application.
- Handle with clean hands to avoid transferring oils or contaminants that could affect the finish or performance.
6. Safety Information
Always observe general safety practices when working with fasteners and tools:
- Wear appropriate personal protective equipment (PPE), such as safety glasses, to protect against flying debris.
- Keep small parts, including washers, out of reach of children to prevent choking hazards.
- Ensure tools are in good working condition and used correctly to avoid injury.
7. Warranty and Support
Specific warranty information for the Midwest 03925 Zinc Fender Washer is not provided within this document. For warranty details, technical support, or further inquiries, please contact Midwest Enterprises directly.
Manufacturer: Midwest Enterprises
Please refer to the official Midwest Gloves or Midwest Enterprises website for the most current contact information.