Kreinik Custom Corder Instruction Manual

1. Introduction

The Kreinik Custom Corder is a versatile hand-held tool designed to twist together two or more strands of thread, creating custom cording. This cording can be used for a variety of craft projects, including jewelry, home decor, and other creative applications. It is compatible with a wide range of thread types, such as metallics, floss, rayon, pearl cotton, and fine yarns. This manual provides detailed instructions for the proper use and care of your Custom Corder.

Image: The Kreinik Custom Corder, a compact black device with a brass twisting mechanism and a green thread attached, demonstrating its function.

2. Safety Information

Please read and understand all safety information before using the Kreinik Custom Corder.

• Keep the tool out of reach of small children and pets.
• Handle the corder with care to avoid accidental injury from moving parts.
• Do not attempt to disassemble the tool beyond what is described in this manual.
• Use only as intended for twisting threads; do not use for other purposes.

3. Package Contents

Verify that all items are present in your package:

• 1 x Kreinik Custom Corder (Model 16726)
• 1 x Instruction Sheet (integrated into this manual)

4. Setup

The Kreinik Custom Corder is designed for immediate use with minimal setup.

1. Carefully remove the Custom Corder from its packaging.
2. Inspect the tool for any visible damage. If damaged, do not use and contact customer support.
3. Familiarize yourself with the components: the main body, the hand crank, and the brass hook/twisting mechanism.

5. Operating Instructions

This section details the process of creating cording with your Kreinik Custom Corder. For best results, it is often helpful to have a second person assist, or to secure one end of the threads to a fixed point.

1. Prepare Your Threads: Cut two or more strands of your desired thread to the same length. The length will depend on your project, but ensure it is long enough to accommodate the twisting process, which will shorten the final cord.
2. Attach Threads to Corder: Gather the ends of your chosen threads and loop them through the brass hook at the top of the Custom Corder. Ensure the threads are securely attached.
3. Secure the Other End: Take the opposite ends of the threads and secure them to a fixed point. This can be a doorknob, a clamp, or held firmly by another person. Ensure the threads are taut but not overly stretched.
4. Begin Twisting: Hold the Custom Corder firmly by its handle. Begin turning the hand crank in a consistent direction (e.g., clockwise). As you turn, the threads will begin to twist tightly. Continue twisting until the threads are very taut and appear to be tightly wound, almost kinky, when released slightly. The amount of twisting required will vary based on thread type and desired cord density.
5. Form the Cord: While keeping the threads taut, carefully bring the Custom Corder towards the secured end. The tension will cause the twisted threads to fold back on themselves and twist together, forming a single cord. Allow the corder to slide freely along the threads as they twist.
6. Finish the Cord: Once the cord has fully formed, remove it from the corder's hook and the secured point. You may need to tie knots at the ends to prevent unraveling, depending on your project.

6. Maintenance

To ensure the longevity and optimal performance of your Kreinik Custom Corder, follow these maintenance guidelines:

• Cleaning: Wipe the tool with a soft, dry cloth after each use to remove any thread fibers or dust. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the Custom Corder in a clean, dry place away from direct sunlight and extreme temperatures. Keeping it in its original packaging or a protective case can prevent damage.
• Lubrication: The internal mechanism is designed for long-term use and generally does not require lubrication. If the crank becomes stiff, contact customer support.

7. Troubleshooting

If you encounter issues with your Kreinik Custom Corder, refer to the table below for common problems and solutions.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please contact Kreinik customer service directly. Refer to the official Kreinik website or product packaging for the most current contact details.