Orbit 57095 Outdoor Sprinkler Controller Cabinet with GFCI Instruction Manual

1. Introduction

This manual provides instructions for the proper installation, operation, and maintenance of your Orbit 57095 Outdoor Sprinkler Controller Cabinet with GFCI. This weather-resistant enclosure is designed to protect indoor sprinkler controllers when used in outdoor environments, ensuring their longevity and reliable performance.

Figure 1: Orbit 57095 Outdoor Sprinkler Controller Cabinet (Closed View)

2. Product Features

• Outdoor Conversion: Designed to convert indoor sprinkler controllers for outdoor use.
• Durable Construction: Made from tough, weather- and UV-resistant ABS resin for long-lasting protection.
• Spacious Interior: Accommodates a variety of timers with interior dimensions of 10-3/4 inches W x 9-1/4 inches H x 3-1/4 inches D.
• Easy Access & Security: Features a hinged door for convenient access and a keyed lock to prevent tampering.
• Integrated GFCI Receptacle: Includes a UL-approved Ground Fault Circuit Interrupter (GFCI) receptacle to reduce the risk of electric shock.
• Broad Compatibility: Compatible with indoor controllers from Orbit, Hydro-Rain, and other major brands.

Figure 2: Orbit 57095 Outdoor Sprinkler Controller Cabinet (Closed View with Dimensions)

Figure 3: Orbit 57095 Outdoor Sprinkler Controller Cabinet (Open View with GFCI Outlet)

3. Safety Information

Read all instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Electrical Safety: Always disconnect power at the circuit breaker before performing any electrical work. If you are unsure about wiring, consult a qualified electrician.
• GFCI Protection: The integrated GFCI receptacle provides essential protection against electrical shock. Test the GFCI regularly as per manufacturer instructions (usually monthly).
• Proper Grounding: Ensure the enclosure and any connected devices are properly grounded.
• Weather Protection: While weather-resistant, ensure the enclosure is securely closed and latched to maintain its protective properties against rain and moisture.
• Ventilation: Do not block any ventilation openings.

4. Package Contents

Verify that all components are present before beginning installation:

• Orbit 57095 Outdoor Sprinkler Controller Cabinet with GFCI
• Mounting hardware (screws, anchors)
• Keys for the lock

5. Installation (Setup)

Follow these steps to install your outdoor sprinkler controller cabinet:

1. Choose a Location: Select a suitable outdoor location for mounting the cabinet. Ensure it is on a sturdy surface, away from direct water spray, and accessible for maintenance.
2. Mount the Cabinet:
   • Open the cabinet door.
   • Using the pre-drilled mounting holes on the back of the cabinet as a template, mark the desired screw locations on the wall.
   • Drill pilot holes if necessary and secure the cabinet to the wall using the provided mounting hardware. Ensure the cabinet is level and securely fastened.
   

   Figure 4: Cabinet mounted on a wall.

3. Install the Sprinkler Controller:
   • Mount your indoor sprinkler controller inside the cabinet. The spacious interior is designed to accommodate various models.
   • Route the controller's power cord to the integrated GFCI receptacle.
   • Utilize the knockouts at the bottom of the cabinet to route irrigation wires and other necessary cables, ensuring a weather-tight seal around all openings.
   

   Figure 5: Sprinkler timer installed inside the cabinet.

4. Wire the GFCI Receptacle:
   • The GFCI receptacle requires a 120V AC power supply. Connect the incoming power wires (Line, Neutral, Ground) to the appropriate terminals on the GFCI.
   • If you are unfamiliar with electrical wiring, it is highly recommended to consult a licensed electrician to ensure safe and proper connection.
5. Secure the Wiring: Ensure all wiring is neatly routed and secured to prevent damage or interference with the cabinet door.

6. Operation

Operating the Orbit 57095 cabinet is straightforward:

• Opening the Door: Insert the provided key into the lock on the side of the cabinet and turn to unlock. The hinged door will then open, providing full access to your sprinkler controller.
• Closing and Securing: After accessing your controller, close the door firmly. Insert the key and turn to lock the cabinet, ensuring it is securely latched to maintain weather resistance and prevent unauthorized access.
• GFCI Test/Reset: The GFCI receptacle has "TEST" and "RESET" buttons. Press "TEST" monthly to ensure it is functioning correctly. The "RESET" button restores power if the GFCI trips.

7. Maintenance

Regular maintenance helps ensure the longevity and effectiveness of your Orbit 57095 cabinet:

• Cleaning: Periodically wipe down the exterior of the cabinet with a damp cloth to remove dirt and debris. Avoid abrasive cleaners.
• Seal Inspection: Annually inspect the weather seal around the door for any signs of wear, cracking, or damage. A compromised seal can reduce weather resistance.
• Lock Lubrication: Apply a small amount of graphite lubricant to the lock mechanism annually to ensure smooth operation.
• GFCI Testing: Test the GFCI receptacle monthly by pressing the "TEST" button. The "RESET" button should pop out, cutting power. Press "RESET" to restore power. If it does not trip, replace the GFCI.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your original purchase or visit the official Orbit website. Keep your purchase receipt as proof of purchase for warranty claims.

Contact Information:

• Brand: Orbit
• Website: www.orbitonline.com
• Customer Service: Refer to the website for current contact methods.