1. Important Safety Information
- Always consult a physician or healthcare professional if your child's congestion persists or worsens.
- Keep this product out of reach of children when not in use. Small parts could pose a choking hazard.
- Inspect the aspirator before each use. Discard and replace if any part shows signs of wear, damage, or deterioration.
- Do not insert the nasal tip too deeply into the child's nostril. Use gentle pressure.
- This product is intended for nasal aspiration only. Do not use for other purposes.
- Ensure the aspirator is thoroughly cleaned and dried after each use to prevent bacterial growth.
2. Product Overview
The CARA Infant Nasal Aspirator is designed to provide immediate relief from nasal congestion for infants. Its simple, flexible design ensures ease of use and effective suction, helping your baby breathe more comfortably.
Image 1: The CARA Infant Nasal Aspirator, featuring a soft, flexible tip and a squeezable bulb for gentle suction.
3. Setup
Before First Use and Each Use
- Remove the aspirator tip from the bulb.
- Flush both the bulb and the aspirator tip thoroughly with warm water. You may use a mild soap if desired, ensuring all soap residue is rinsed off.
- Ensure all parts are clean and dry before reassembly.
4. Operating Instructions
How to Use
- Ensure the aspirator tip is securely placed into the bulb.
- Squeeze the bulb completely to expel all air from it.
- While keeping the bulb compressed, gently place the nasal tip to the opening of the child's nostril. Do not force the tip deep into the nostril.
- Slowly release the bulb to create gentle suction, drawing mucus into the aspirator.
- Remove the aspirator from the nostril and squeeze the bulb to expel the collected mucus into a tissue or sink.
- Repeat the process for the other nostril if necessary. Clean the aspirator as described in the Maintenance section after each use.
5. Maintenance and Cleaning
Cleaning Instructions
- Disassemble the aspirator by removing the tip from the bulb.
- Wash both the bulb and the tip thoroughly with warm, soapy water. The manufacturer recommends hand washing only.
- Rinse all components under clean running water to remove any soap residue.
- Allow all parts to air dry completely before reassembling or storing. Ensure no moisture remains inside the bulb to prevent mold growth.
Storage
- Store the clean, dry aspirator in a hygienic place, away from dust and contaminants.
- Keep away from direct sunlight and extreme temperatures.
6. Troubleshooting
If the aspirator does not provide adequate suction, ensure all parts are correctly assembled and that there are no blockages in the tip or bulb. Check for any cracks or damage that might compromise suction. If congestion persists or worsens after using the aspirator, consult a healthcare professional immediately.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | K028506 |
| Product Dimensions | 2.25 x 2.25 x 4.25 inches |
| Item Weight | 1 Pound |
| Material Type | Plastic |
| Power Source | Manually Powered |
| Water Resistance Level | Waterproof |
| Product Care Instructions | Hand Wash Only |
| Manufacturer | CARA INC. |
8. Warranty and Support
This CARA product is manufactured to high-quality standards. For specific warranty information, product support, or to inquire about replacement parts, please contact CARA customer service directly. Please retain your proof of purchase for any warranty claims.
You can also visit the official CARA store for more information: