1. Product Overview
The Access Lighting Atom 3-Light 14" Flush Mount Incandescent Light Fixture is a traditional lighting solution designed for various indoor spaces. Featuring a brushed steel finish and an opal glass shade, this fixture provides ambient illumination. It is part of the Atom collection and is suitable for general purpose lighting applications.
Image: The Atom 3-Light Flush Mount fixture installed in a hallway, providing warm ambient light.
2. Setup and Installation
This fixture is designed for ceiling flush mount installation. Assembly is required. It is recommended that installation be performed by a qualified electrician to ensure safety and compliance with local electrical codes.
2.1. Before You Begin
- Safety First: Turn off power at the circuit breaker before beginning installation.
- Unpack: Carefully unpack all components and check for any damage. Retain packaging materials until you are satisfied with the product.
- Tools Required: Standard electrical tools (screwdriver, wire strippers, electrical tape, etc.) may be needed.
2.2. Installation Steps
- Prepare Wiring: Ensure the electrical box is securely mounted and the power is off.
- Mount Fixture Base: Attach the mounting bracket to the electrical box using the provided screws.
- Connect Wires: Connect the fixture's wires to the household electrical wires according to standard wiring practices (black to black, white to white, ground to ground). Secure connections with wire nuts.
- Secure Fixture: Carefully tuck wires into the electrical box and attach the fixture base to the mounting bracket.
- Install Glass Shade: The Atom flush mount features a twist-and-lock opal glass shade. Align the shade with the fixture base and twist to secure it.
- Install Light Bulbs: Insert three (3) 60W A19 Medium Base Incandescent bulbs (not included) into the sockets.
- Restore Power: Turn power back on at the circuit breaker.
Image: Close-up of the fixture's brushed steel finish and opal glass shade, highlighting the twist-and-lock mechanism.
3. Operating Instructions
The Atom 3-Light Flush Mount fixture is controlled via a standard wall switch or a remote control system, if installed. Ensure all bulbs are correctly seated for proper operation.
- Power On/Off: Use the connected wall switch to turn the light fixture on or off.
- Bulb Type: This fixture uses three (3) Incandescent A19 bulbs with a medium base, up to 60 watts each.
- Control Method: The fixture supports remote control operation if integrated with a compatible remote system (remote not included).
4. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your light fixture.
- Cleaning:
- Always turn off power before cleaning.
- Wipe the brushed steel finish with a soft, dry cloth. Avoid abrasive cleaners or polishes that could damage the finish.
- The opal glass shade can be removed (twist-and-lock) and cleaned with a mild glass cleaner and a soft cloth. Ensure the shade is completely dry before reattaching.
- Bulb Replacement:
- Turn off power at the circuit breaker.
- Carefully remove the opal glass shade by twisting it counter-clockwise.
- Unscrew the old bulb and replace it with a new 60W A19 Medium Base Incandescent bulb.
- Reattach the glass shade by aligning and twisting clockwise until secure.
- Restore power.
5. Troubleshooting
If you experience issues with your light fixture, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; loose wiring; faulty bulb. | Check circuit breaker. Ensure all wire connections are secure. Replace bulb. |
| Light flickers. | Loose bulb; incorrect bulb type/wattage; loose wiring. | Tighten bulb. Verify bulb specifications. Check wiring connections. |
| Glass shade is difficult to remove/attach. | Misalignment; debris in twist-lock mechanism. | Ensure proper alignment before twisting. Clean any debris from the mechanism. |
If the issue persists after attempting these solutions, please contact customer support.
6. Specifications
| Brand | Access Lighting |
| Model Name | Atom |
| Model Number | 20726-BS/OPL |
| Color | Brushed Steel Finish |
| Material | Aluminum (Fixture), Glass (Shade) |
| Style | Incandescent |
| Light Fixture Form | Flush Mount |
| Product Dimensions | 14"L x 14"W x 4"H |
| Item Weight | 5.7 Pounds |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Number of Light Sources | 3 |
| Wattage | 60 watts (per bulb, max) |
| Shade Material | Opal Glass |
| Assembly Required | Yes |
| Certification | UL Listed |
| UPC | 641594003154 |
7. Warranty Information
This Access Lighting product is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please refer to the official Access Lighting website or contact customer support.
8. Customer Support
For technical assistance, replacement parts, or any questions regarding your Access Lighting Atom Flush Mount fixture, please contact Access Lighting customer support.
- Website: Visit the official Access Lighting Store on Amazon for product information and support resources.
- Contact: Refer to the product packaging or the Access Lighting website for direct contact information (phone, email).