Casio TQ-140-7EF Beeper Alarm Clock User Manual

Introduction

Thank you for choosing the Casio TQ-140-7EF Beeper Alarm Clock. This compact and reliable alarm clock is designed for ease of use, featuring a clear analog display and a distinct beeper alarm. This manual will guide you through the setup, operation, and maintenance of your new alarm clock.

Safety Information

• Do not expose the clock to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping the clock or subjecting it to strong impacts.
• Keep batteries out of reach of children. If swallowed, seek medical attention immediately.
• Dispose of used batteries according to local regulations.

Parts Identification

Front view of the Casio TQ-140-7EF Beeper Alarm Clock, showing the white casing, clear face cover, large easy-to-read numbers, and black hour, minute, and second hands with luminous tips. The Casio logo and 'QUARTZ' are visible on the clock face.

• Clock Face: Displays time with hour, minute, and second hands. Features large, easy-to-read numbers and luminous markings for visibility.
• Alarm Hand: A dedicated hand on the clock face used to set the desired alarm time.
• Alarm Stop Button: Located on the top of the clock, used to silence the alarm.
• Time Setting Knob: Located on the back, used to adjust the current time.
• Alarm Setting Knob: Located on the back, used to set the alarm time.
• Battery Compartment: Located on the back, holds the required battery.

Setup

1. Battery Installation

1. Open the battery compartment cover on the back of the clock.
2. Insert one (1) AA (LR6) battery, ensuring the positive (+) and negative (-) terminals are aligned correctly as indicated inside the compartment. A battery is included with your purchase.
3. Close the battery compartment cover securely.

2. Setting the Current Time

1. Locate the Time Setting Knob on the back of the clock.
2. Gently pull out the Time Setting Knob.
3. Rotate the knob in either direction to move the hour and minute hands to the correct current time.
4. Once the time is set, push the Time Setting Knob back in to start the clock.

Operating the Alarm

1. Setting the Alarm Time

1. Locate the Alarm Setting Knob on the back of the clock.
2. Rotate the Alarm Setting Knob to move the Alarm Hand to your desired wake-up time.
3. Note: The alarm operates on a 12-hour cycle. Ensure you set the alarm for the correct AM/PM period relative to the current time.

2. Activating the Alarm

1. To activate the alarm, ensure the Alarm Stop Button on top of the clock is in the 'up' or 'ON' position.

3. Stopping the Alarm

1. When the alarm sounds, press down the Alarm Stop Button on the top of the clock to silence it. This will put the alarm in the 'off' position.
2. To reactivate the alarm for the next day, push the Alarm Stop Button back to the 'up' or 'ON' position.

Maintenance

• Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace the battery when the clock hands begin to move slowly or stop completely. Always use a fresh AA (LR6) battery.
• Storage: If storing the clock for an extended period, remove the battery to prevent leakage.

Troubleshooting

Specifications

• Model: TQ-140-7EF
• Brand: Casio
• Dimensions: Approximately 2.25 inches (5.7 cm) square
• Weight: Approximately 2.26 ounces (64 grams)
• Power Source: 1 x AA (LR6) battery (included)
• Alarm Type: Beeper alarm
• Display Type: Analog (Hours, Minutes, Seconds)
• Case Material: Plastic

Warranty and Support

For information regarding warranty coverage or technical support for your Casio TQ-140-7EF Beeper Alarm Clock, please refer to the warranty card included with your product or visit the official Casio website. You may also contact Casio customer service directly for assistance.