Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Dornbracht Tara Classic single-lever mixer, model 33880888-00. Please read these instructions carefully before beginning installation or use, and retain them for future reference.
Safety Information
- Ensure all water supply lines are turned off before installation or maintenance.
- Installation should be performed by a qualified professional to ensure compliance with local plumbing codes and safety standards.
- Do not use abrasive cleaners or harsh chemicals on the polished chrome finish, as this may cause damage.
- Verify all connections are secure and watertight to prevent leaks.
Setup and Installation
The Dornbracht Tara Classic mixer is designed for deck mount, single-hole installation. A drill hole diameter of 35 mm is required for proper fitting.
Image: Dornbracht Tara Classic Single-Lever Mixer, polished chrome finish, installed on a light-colored countertop. The faucet features a high arc spout and a pull-down spray hose with a spring coil design.
Installation Steps:
- Prepare the Mounting Surface: Ensure the countertop has a single hole with a diameter of 35 mm. The surface should be clean and dry.
- Secure the Mixer: Insert the mixer into the mounting hole. Secure it from underneath the countertop using the provided fastening hardware.
- Connect Water Supply: Connect the hot and cold water supply lines to the corresponding inlets on the mixer. Ensure all connections are tightened securely to prevent leaks. The recommended minimum flow pressure is 2.5 bar.
- Test for Leaks: Slowly turn on the main water supply and check all connections for any signs of leakage. Operate the mixer to ensure proper water flow and temperature control.
Operating Instructions
The Tara Classic mixer features a single lever for controlling both water flow and temperature. It is equipped with a cartridge containing ceramic discs for smooth operation and durability.
- Water Flow Control: Lift the lever to increase water flow. Push down to decrease or stop the flow.
- Temperature Control: Move the lever to the left for hot water and to the right for cold water.
- Swivel Spout: The spout can swivel 360 degrees, providing flexibility for various sink tasks.
- Spray Function: The mixer includes a pull-down sprayface with an anti-limescale system. The maximum flow rate for the main faucet is 7 liters per minute at 3 bar flow pressure, and for the spray function, it is 6 liters per minute at 3 bar flow pressure.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Dornbracht mixer.
- Cleaning the Finish: Clean the polished chrome finish with a soft cloth and mild soap and water. Rinse thoroughly and dry immediately to prevent water spots. Avoid abrasive cleaners, scouring pads, or harsh chemicals.
- Limescale Prevention: The sprayface is equipped with an anti-limescale system. Regularly wipe the nozzles to remove any mineral deposits. For stubborn deposits, use a solution of water and white vinegar, then rinse thoroughly.
- Cartridge Maintenance: The ceramic disc cartridge is designed for long-term, drip-free performance. If reduced flow or persistent dripping occurs, consult a qualified plumber for cartridge inspection or replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced Water Flow | Aerator clogged with debris or limescale. | Unscrew the aerator, clean it, and reinstall. |
| Leaking from Spout | Worn cartridge or seals. | Contact a qualified plumber for cartridge replacement. |
| Water Temperature Issues | Improper hot/cold water supply connections or issues with water heater. | Verify supply line connections. Check water heater settings. |
Specifications
- Brand: Dornbracht
- Model Name: 33880888-00
- Series ID: Tara Classic
- Color: Chrome
- Finish Type: Polished
- Material: Alloy Steel (faucet body), Metal (handle)
- Mounting Type: Deck Mount
- Installation Type: Single Hole
- Number of Handles: 1
- Hole Count: 1
- Spout Design: Swivel (360°)
- Spout Projection: 200 mm
- Drill Hole Diameter: 35 mm
- Maximum Flow Rate (Faucet): 7 Liters Per Minute at 3 bar flow pressure
- Maximum Flow Rate (Spray): 6 Liters Per Minute at 3 bar flow pressure
- Recommended Minimum Flow Pressure: 2.5 bar
- Special Features: Limescale Prevention, Backflow Prevention, Lead-free
- Item Weight: 5.85 Kilograms (12.87 pounds)
- Product Dimensions: 14.96 x 23.62 x 3.94 inches
- Recommended Uses: Bathroom, Kitchen
Warranty and Support
The Dornbracht Tara Classic single-lever mixer comes with a lifetime warranty, reflecting the manufacturer's commitment to quality and durability.
For technical assistance, warranty claims, or to purchase replacement parts, please contact Dornbracht customer support through their official website or authorized distributors. Always provide your model number (33880888-00) when seeking support.
