CRC SL3301
CRC SL3301 Synthetic Brake & Caliper Grease User Manual
Brand: CRC | Model: SL3301
1. Product Overview
The CRC SL3301 Synthetic Brake & Caliper Grease is a specially developed, high-tech formula designed for optimal performance in disc and drum brake systems. This advanced synthetic grease is formulated to withstand high temperatures and is safe for use with plastic and rubber components, ensuring longevity and reliability of your braking system.
Image 1.1: A tube of CRC SL3301 Synthetic Brake & Caliper Grease, 2.5 Wt Oz.
Key Features:
- Contains molybdenum, PTFE, and graphite for an extreme temperature range of -30°F to 600°F.
- Suitable for use on every brake job.
- Synthetic grease prevents caliper binding, vibration, and corrosion.
- Plastic and rubber safe formulation.
2. Safety Information
WARNING: This product can expose you to chemicals including Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Always wear appropriate personal protective equipment, such as gloves and eye protection, when handling this product. Use in a well-ventilated area. Keep out of reach of children and pets. Do not ingest. In case of contact with eyes or skin, rinse thoroughly with water. If irritation persists, seek medical attention.
Dispose of product and packaging in accordance with local regulations.
3. Preparation for Use
Before applying CRC SL3301 Synthetic Brake & Caliper Grease, ensure the brake components are clean and free from old grease, dirt, rust, and brake dust. Proper preparation is crucial for the grease to perform effectively and prevent contamination.
- Clean Components: Thoroughly clean all brake components where the grease will be applied, including caliper pins, backing plates, and contact points. A high-quality brake cleaner is recommended for this step.
- Dry Surfaces: Ensure all surfaces are completely dry before application. Moisture can compromise the effectiveness of the grease.
- Shake Tube: Before opening, gently knead or shake the grease tube to ensure the contents are well-mixed and consistent. This helps prevent liquid separation.
Image 3.1: Cleaning brake components with a brake cleaner before applying grease.
4. Application Instructions
Apply CRC SL3301 Synthetic Brake & Caliper Grease sparingly and evenly to the designated areas to ensure smooth operation and prevent noise.
- Caliper Pins/Slide Pins: Apply a thin, even coat of grease to the caliper slide pins. This allows the caliper to move freely and prevents uneven pad wear.
- Brake Pad Backing Plates: Apply a thin layer to the metal backing plates of the brake pads where they contact the caliper. Avoid getting grease on the friction material of the brake pads or the rotor surface.
- Caliper Contact Points: Apply a small amount of grease to the points where the brake pads slide within the caliper bracket.
- Rubber Components: This grease is safe for rubber. Apply a thin coat to rubber boots and seals on caliper pins to protect them and ensure smooth movement.
- Assembly: Reassemble brake components according to manufacturer's specifications.
- Wipe Excess: Wipe away any excess grease immediately to prevent contamination of other brake components.
Note: Do not apply this grease to the friction surface of brake pads or rotors.
5. Care and Storage
- Store the grease tube in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure the cap is tightly sealed after each use to prevent contamination and drying out.
- Keep the product upright to minimize the chance of separation or leakage.
- Regularly inspect your brake system for proper lubrication during routine maintenance checks.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Grease appears separated (liquid and solid) | Product settling during storage. | Gently knead or shake the tube before use to re-mix the contents. |
| Brake noise persists after application | Insufficient cleaning, improper application, or other brake system issues. | Ensure all components were thoroughly cleaned and dried. Reapply grease correctly. If noise persists, consult a qualified mechanic as other issues may be present. |
| Caliper binding or sticking | Insufficient grease on slide pins, damaged pins, or other caliper issues. | Verify adequate and even application of grease on slide pins. Inspect pins for damage or corrosion. |
7. Technical Specifications
| Attribute | Detail |
|---|---|
| Product Name | Synthetic Brake & Caliper Grease |
| Model Number | SL3301 |
| Brand | CRC |
| Item Weight | 2.5 Ounces (71 grams) |
| Temperature Range | -30°F to 600°F |
| Material Composition | PTFE, Synthetic, Graphite, Molybdenum |
| Compatibility | Plastic and Rubber Safe |
| Product Dimensions | 6.19 x 1.5 x 2 inches |
| Manufacturer | CRC Industries |
8. Warranty and Support
For specific warranty information regarding CRC SL3301 Synthetic Brake & Caliper Grease, please refer to the product packaging or contact CRC Industries directly. CRC is committed to providing high-quality products and customer satisfaction.
For technical assistance, product inquiries, or support, please visit the official CRC website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
You can visit the CRC Store online at: CRC Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.