1. Introduction
The Kaiser RS 2-XA Copy Stand is designed for precise photographic reproduction and digitization tasks. It features a stable, non-reflective baseboard and an adjustable column with a camera arm, providing a reliable platform for various camera types. This manual provides essential information for the setup, operation, and maintenance of your copy stand.
Figure 1: The Kaiser 205411 Copy Stand RS 2-XA, showcasing its matte gray baseboard and black aluminum column with camera arm.
2. Components
The Kaiser RS 2-XA Copy Stand includes the following main components:
- Baseboard: A non-reflective matte gray baseboard with a printed fine grid and inch/cm scale. Dimensions: 16" x 20".
- Column: A matte black anodized aluminum tubing column with inch/cm scales.
- Camera Arm: An adjustable arm for mounting the camera, featuring a 1/4" mounting thread.
- Mounting Hardware: Necessary bolts and knobs for assembly.
3. Setup Instructions
- Unpack Components: Carefully remove all parts from the packaging and verify that all components listed in Section 2 are present.
- Attach Column to Baseboard: Securely fasten the matte black aluminum column to the designated mounting point on the matte gray baseboard using the provided hardware. Ensure the column is stable and upright.
- Mount Camera Arm: Slide the camera arm onto the column. The arm's height can be adjusted later.
- Mount Camera: Attach your camera to the 1/4" mounting thread on the camera arm. Ensure the camera is securely tightened to prevent movement during operation.
Figure 2: Close-up view of the camera arm and its adjustment mechanism on the column.
4. Operating the Copy Stand
Follow these guidelines for effective use of your Kaiser Copy Stand:
- Height Adjustment: Use the smooth action manual arm height adjustment mechanism to position your camera at the desired distance from the subject on the baseboard. The inch/cm scales on the column assist with precise positioning.
- Column Rotation: The column can be rotated 180 degrees, offering flexibility in subject placement and lighting arrangements.
- Horizontal Adjustment: The camera arm allows for approximately 2.7 inches (7 cm) of adjustable horizontal distance from the column, enabling fine-tuning of camera position relative to the subject.
- Subject Placement: Place your document or object on the non-reflective matte gray baseboard. Utilize the printed fine grid and inch/cm scale for accurate alignment and positioning of your subject.
- Lighting: For optimal results, ensure even and glare-free illumination of your subject. Optional lighting kits are available separately.
Figure 3: Example setup of the copy stand with external lighting and a document on the baseboard.
Figure 4: The copy stand integrated into a digital workflow, demonstrating its use for digitizing printed materials with a camera and laptop.
5. Key Features
- Non-reflective matte gray baseboard with printed fine grid and inch/cm scale.
- Matte black anodized aluminum tubing column with inch/cm scales.
- Height adjustable camera arm for precise positioning.
- Column rotatable 180 degrees for versatile setup.
- Approximately 2.7 inches (7 cm) adjustable horizontal distance of camera arm to column.
- Standard 1/4" mounting thread for camera compatibility.
- Maximum load capacity of 3.3 pounds.
- Suitable for use with smaller SLR cameras, digital cameras, CCD, and CMOS cameras.
6. Maintenance
To ensure the longevity and optimal performance of your Kaiser Copy Stand, follow these simple maintenance steps:
- Cleaning: Wipe down the baseboard and column with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
- Storage: Store the copy stand in a clean, dry environment away from extreme temperatures and humidity.
- Inspection: Periodically check all screws and connections to ensure they are tight. Do not overtighten.
7. Troubleshooting
If you encounter issues with your copy stand, consider the following:
- Camera Instability: Ensure your camera is securely mounted to the 1/4" thread on the camera arm. Verify that the camera's weight does not exceed the maximum load capacity of 3.3 pounds.
- Arm Adjustment Difficulty: Check for any obstructions or debris in the column's track. Ensure adjustment knobs are loosened sufficiently before attempting to move the arm.
- Uneven Illumination: This is typically related to external lighting. Adjust your light sources to eliminate shadows and glare on your subject.
For persistent issues not covered here, please refer to the support section.
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 42.13 x 18.11 x 9.45 inches |
| Item Weight | 0.005 ounces (0.15 Grams) |
| Item Model Number | 205411 |
| Brand | Kaiser |
| Manufacturer | Kaiser Fototechnik |
| Material | Aluminum |
| Color | Black |
| Mounting Thread | 1/4" |
| Max Load Capacity | 3.3 pounds |
9. Warranty Information
The Kaiser 205411 Copy Stand RS 2-XA comes with a Limited One Year Warranty Against Manufacturing Defects. Please retain your proof of purchase for warranty claims. This warranty covers defects in materials and workmanship under normal use.
10. Customer Support
For further assistance, technical support, or warranty inquiries, please contact Kaiser customer service. Refer to the official Kaiser website or product packaging for the most current contact information.
