1. Introduction
This instruction manual provides detailed guidance for the proper installation, use, and maintenance of the Sioux Chief 827-2B No-Caulk Snap-in Shower Drain. Adhering to these instructions will ensure optimal performance and longevity of the product. Please read this manual thoroughly before beginning installation.
2. Product Overview
The Sioux Chief 827-2B is a 2-inch no-caulk snap-in shower drain designed for use with fiberglass shower modules. It features an 18-gauge stainless steel strainer and a durable cast brass body, ensuring reliable performance in residential and commercial applications. The PVC elastomer no-caulk gasket simplifies installation by providing a secure, watertight seal with the waste pipe.
Image 1: Sioux Chief 827-2B No-Caulk Snap-in Shower Drain. This image displays the complete drain assembly, featuring a polished stainless steel strainer with rectangular slots, a black rubber gasket, and a brass body with threaded connections.
Key Features:
- 2-inch drain size.
- 18-gauge stainless steel strainer for durability.
- Cast brass body construction.
- PVC elastomer no-caulk gasket for easy, secure sealing to the waste pipe.
- Specifically designed for fiberglass shower modules.
3. Safety Information
Always prioritize safety during installation. Failure to follow safety guidelines can result in injury or property damage.
- Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
- Ensure the work area is well-lit and free of obstructions.
- Turn off the main water supply before beginning any plumbing work.
- Consult local plumbing codes and regulations to ensure compliance.
- If you are unsure about any step, consult a qualified plumber.
4. Components
The Sioux Chief 827-2B No-Caulk Snap-in Shower Drain typically includes the following components:
- Stainless Steel Strainer: The visible top part that covers the drain opening and prevents large debris from entering.
- Cast Brass Drain Body: The main housing of the drain, which connects to the waste pipe.
- PVC Elastomer No-Caulk Gasket: A flexible seal that creates a watertight connection between the drain body and the waste pipe.
- Mounting Screws: Used to secure the strainer to the drain body.
5. Setup and Installation
This section outlines the steps for installing the Sioux Chief 827-2B No-Caulk Snap-in Shower Drain. This drain is designed for fiberglass shower modules.
- Prepare the Shower Base: Ensure the opening in the fiberglass shower module is clean and correctly sized for the drain body. The drain opening should be free of any debris or rough edges.
- Position the Drain Body: Insert the cast brass drain body through the opening in the shower module from the top. Ensure the flange of the drain body sits flush with the surface of the shower base.
- Connect the Waste Pipe: From underneath the shower module, slide the PVC elastomer no-caulk gasket onto the waste pipe (typically 2-inch PVC or ABS). Push the waste pipe with the gasket firmly into the bottom opening of the drain body. The no-caulk gasket creates a compression seal. Ensure the pipe is fully seated and the seal is tight. Note: The waste pipe may need to be cut to the correct height using an inside pipe cutter for a flush fit.
- Install the Strainer: Place the stainless steel strainer over the drain opening. Align the screw holes on the strainer with the corresponding holes on the drain body.
- Fasten the Strainer: Secure the strainer using the provided mounting screws. Do not overtighten, as this can damage the strainer or the drain body.
- Test for Leaks: Once installation is complete, temporarily block the drain opening and fill the shower pan with a small amount of water. Check underneath the shower module for any signs of leaks around the drain connection.
6. Operating Instructions
Once installed, the Sioux Chief 827-2B shower drain operates passively to remove wastewater from your shower. No specific user interaction is required for its primary function. Ensure the strainer remains in place to prevent large debris from entering the plumbing system.
7. Maintenance
Regular maintenance helps ensure the efficient operation and longevity of your shower drain.
- Strainer Cleaning: Periodically remove the stainless steel strainer by unscrewing the mounting screws. Clean any accumulated hair, soap scum, or debris from the underside of the strainer and the drain opening. Rinse the strainer and reinstall it.
- Drain Cleaning: If slow drainage occurs, use a non-corrosive drain cleaner or a plumbing snake designed for shower drains to clear any blockages. Avoid harsh chemical cleaners that may damage plumbing components.
- Inspection: Annually inspect the drain for any signs of wear, corrosion, or loose connections. Address any issues promptly to prevent leaks or further damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow Drainage | Hair, soap scum, or debris buildup in the drain or P-trap. | Remove and clean the strainer. Use a drain snake or non-corrosive drain cleaner to clear blockages. |
| Water Leaking Around Drain | Improperly seated no-caulk gasket or damaged drain body/pipe connection. | Ensure the waste pipe is fully inserted into the drain body and the gasket is properly sealed. Inspect the drain body and pipe for cracks or damage. Re-seat or replace components as necessary. |
| Unpleasant Odors from Drain | Dry P-trap, debris accumulation, or sewer gas. | Run water for a few minutes to fill the P-trap. Clean the drain and strainer thoroughly. If odors persist, consult a plumber. |
9. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 827-2B |
| Brand | Sioux Chief |
| Drain Size | 2 inches |
| Strainer Material | 18 gauge Stainless Steel |
| Body Material | Cast Brass |
| Gasket Type | PVC Elastomer No-Caulk |
| Finish Type | Polished (Brass) |
| Product Dimensions | 0.5 x 4.3 x 4.3 inches |
| Item Weight | 1.3 pounds |
| UPC | 739236301765 |
10. Warranty and Support
For specific warranty information regarding the Sioux Chief 827-2B No-Caulk Snap-in Shower Drain, please refer to the documentation provided with your purchase or visit the official Sioux Chief website. For technical support, replacement parts, or further assistance, please contact Sioux Chief customer service directly.
Manufacturer: Sioux Chief
Website: www.siouxchief.com (Note: This is a placeholder URL, please verify the actual manufacturer website for support.)
