TEAC PD-D2610 5-CD Carousel Changer Instruction Manual

Product Overview

The TEAC PD-D2610 is a versatile 5-CD carousel changer designed for playing standard audio CDs, CD-R/RW discs, and MP3 CDs. It features a fluorescent display, direct access keys, and a remote control for convenient operation, providing a seamless audio experience for your home audio system.

Key Features

• CD, CD-R/RW and MP3 playback
• Fluorescent display with music calendar
• 1-Bit D/A converter, 8x oversampling
• 10-Digit direct access keys (front panel and remote)
• 32-Selection random memory program

Important Safety Instructions

• Read these instructions thoroughly before operating the unit.
• Keep these instructions for future reference.
• Heed all warnings on the product and in the operating instructions.
• Follow all instructions for proper use and maintenance.
• Do not use this apparatus near water or moisture.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

What's Included

Verify that all items listed below are present in your package:

• TEAC PD-D2610 5-CD Carousel Changer
• Remote Control
• Power Cord
• RCA Audio Cables (if included by manufacturer)

Setup and Connections

Placement

Place the CD changer on a stable, level surface away from direct sunlight, heat sources, and excessive dust or moisture. Ensure adequate ventilation around the unit.

Connecting to Your Audio System

The PD-D2610 offers both analog RCA and digital optical audio outputs for connection to your amplifier or receiver.

1. Analog Connection (RCA): Connect RCA audio cables (red for right, white for left) from the 'ANALOG AUDIO OUT' jacks on the rear of the PD-D2610 to an available analog input (e.g., 'CD', 'AUX') on your amplifier or receiver.
2. Digital Connection (Optical): For higher fidelity, connect an optical audio cable from the 'OPTICAL DIGITAL OUT' jack on the rear of the PD-D2610 to a digital optical input on your amplifier or receiver.
3. Power Connection: Plug the power cord into the AC inlet on the rear of the unit, then into a standard AC wall outlet.

Image: Rear panel of the TEAC PD-D2610, illustrating the analog RCA and digital optical audio output connections. The power input is also visible.

Operating Instructions

Powering On/Off

Press the POWER button on the front panel to turn the unit on or off. The unit can also be powered on/off using the remote control.

Loading Discs

1. Press the OPEN/CLOSE button on the front panel or remote control to open the disc tray.
2. Place up to five CDs onto the carousel, ensuring they are seated correctly in their respective slots with the label side facing up.
3. Press the OPEN/CLOSE button again to close the disc tray. The unit will begin reading the discs.

Image: Front view of the TEAC PD-D2610 with the carousel tray extended, showing five discs loaded into the changer.

Playback Controls

• Play (▶): Press to start playback.
• Pause (⏸): Press to temporarily stop playback. Press again to resume.
• Stop (■): Press to stop playback completely.
• Skip Track (⏭︎ / ⏮︎): Press to skip to the next or previous track.
• Fast Forward/Rewind (⏩ / ⏪): Press and hold to fast forward or rewind within a track.
• Disc Select (1-5): Use the numbered buttons on the front panel or remote to directly select a disc.
• Disc Skip: Press to skip to the next loaded disc in sequence.
• Play Exchange: Allows you to open the disc tray and swap discs while another disc is playing, ensuring uninterrupted music.

Using the Remote Control

The included remote control provides full functionality for operating the PD-D2610 from a distance. Ensure the remote has fresh batteries (2x AA) and is pointed towards the front panel of the CD changer.

Image: The TEAC PD-D2610 CD changer displayed alongside its remote control, highlighting the comprehensive control options available.

MP3 CD Playback

The PD-D2610 supports playback of MP3 files burned onto CD-R/RW discs. When an MP3 CD is inserted, the unit will read the disc and allow navigation through folders and tracks using the skip and fast forward/rewind controls.

Care and Maintenance

• Cleaning the Unit: Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
• Cleaning Discs: Handle CDs by their edges. If a disc is dirty, wipe it gently with a soft, lint-free cloth from the center outwards. Do not use solvents or abrasive cleaners.
• Laser Lens Care: The laser lens should not be cleaned manually. If playback issues persist due to a dirty lens, use a commercially available CD lens cleaner disc.
• Ventilation: Ensure that the ventilation openings on the unit are not obstructed to prevent overheating.

Troubleshooting

If you encounter any issues with your TEAC PD-D2610, refer to the table below for common problems and solutions.

Technical Specifications

Warranty and Customer Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official Teac website. Keep your purchase receipt as proof of purchase for any warranty claims.