Power Wheels 00801-1779

Power Wheels 6-Volt Battery Charger (Type A Connector) Instruction Manual

Model: 00801-1779

1. Introduction

This manual provides essential instructions for the safe and effective use of your Power Wheels 6-Volt Battery Charger. This charger is specifically designed for Power Wheels ride-on toys that utilize the red 6-volt battery with part numbers 00801-0712 and 00801-1459. The current charger part number is 00801-1779, replacing the older Fisher-Price part number 00801-0974. Please read this manual thoroughly before operating the charger.

2. Important Safety Information

WARNING: Failure to follow these safety instructions could result in serious injury or property damage.

  • This charger is for indoor use only. Do not expose to moisture or water.
  • Use this charger only with Power Wheels 6-volt red batteries (part numbers 00801-0712, 00801-1459). Do not attempt to charge other battery types, especially the smaller blue 6V batteries.
  • Adult supervision is required when charging batteries.
  • Do not use the charger if the cord, plug, or charger casing is damaged. Contact customer support for replacement.
  • Ensure proper ventilation during charging. Do not cover the charger or battery.
  • Keep out of reach of children.
  • Always disconnect the charger from the power outlet before connecting or disconnecting the battery.

3. Package Contents

Verify that all items are present in your package:

  • Power Wheels 6-Volt Battery Charger (Part Number 00801-1779)
  • Instruction Manual (this document)
Power Wheels 6-Volt Battery Charger with Type A connector

Image: The Power Wheels 6-Volt Battery Charger, showing its red casing and Type A connector.

4. Setup

  1. Identify Your Battery: Ensure you have a Power Wheels 6-volt red battery (e.g., part numbers 00801-0712 or 00801-1459). This charger is not compatible with other battery types, including the smaller blue 6V batteries. The red battery typically measures approximately 4.25" x 2.78" x 5.47".
  2. Prepare the Charging Area: Choose a dry, well-ventilated indoor area away from flammable materials.
  3. Connect the Charger to the Battery: Align the Type A connector of the charger with the corresponding port on your Power Wheels red 6-volt battery. Push firmly until it clicks into place.
  4. Plug into Power Outlet: Insert the charger's power plug into a standard 120V AC wall outlet.

5. Operating Instructions

Once connected and plugged in, the charger will begin charging the battery. The charger typically has an indicator light:

  • Charging Indicator: A red or amber light usually indicates that the battery is charging.
  • Fully Charged Indicator: A green light typically indicates that the battery is fully charged. Some chargers may turn off the light or change color. Refer to your specific charger's labeling for exact indicator behavior.

Charging Time: A completely discharged 6-volt Power Wheels red battery can take approximately 14-18 hours to fully charge. Do not charge for more than 30 hours. Overcharging can damage the battery.

After Charging: Once the battery is fully charged, first unplug the charger from the wall outlet, then disconnect the charger from the battery.

6. Maintenance

  • Cleaning: Wipe the charger with a dry cloth. Do not use liquids or solvents.
  • Storage: Store the charger in a cool, dry place when not in use. Keep it away from direct sunlight and extreme temperatures.
  • Cord Care: Regularly inspect the power cord and connector for any signs of damage. Do not wrap the cord tightly around the charger.

7. Troubleshooting

ProblemPossible CauseSolution
Charger light not on / Battery not charging
  • Charger not plugged in
  • Outlet not working
  • Charger or battery damaged
  • Incorrect battery type
  • Ensure charger is securely plugged into a working outlet.
  • Test the outlet with another appliance.
  • Inspect charger and battery for visible damage. If damaged, discontinue use and replace.
  • Confirm you are using a Power Wheels 6-volt red battery.
Battery charges slowly or not fully
  • Battery is old or worn out
  • Charging in a cold environment
  • Batteries have a limited lifespan and may need replacement after extended use.
  • Ensure charging occurs at room temperature (18-25°C / 65-77°F).

8. Specifications

  • Model Number: 00801-1779 (Replaces 00801-0974)
  • Input: 120V AC, 60Hz
  • Output Voltage: 6 Volts DC
  • Compatibility: Power Wheels 6-Volt Red Batteries (e.g., 00801-0712, 00801-1459)
  • Certification: UL Listed
  • Dimensions (approximate): 5.47"D x 2.78"W x 5.47"H (charger unit)

9. Warranty and Customer Support

For warranty information, technical assistance, or to purchase replacement parts, please contact Power Wheels customer support. Refer to the packaging or the official Power Wheels website for the most current contact details.

Online Resources: You may find additional support and FAQs on the official Power Wheels website: www.powerwheels.com

© 2023 Power Wheels. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.