Globe Electric SL-7357

Heath Zenith SL-7357 Wireless Plug-In Door Chime Extender Instruction Manual

Model: SL-7357

1. Introduction

Thank you for choosing the Heath Zenith SL-7357 Wireless Plug-In Door Chime Extender. This device is designed to expand your existing doorbell coverage, ensuring you hear your doorbell throughout your home. It operates by detecting the sound of your current doorbell and wirelessly activating a plug-in chime unit. This manual provides detailed instructions for installation, operation, and maintenance.

2. Product Overview

The Heath Zenith SL-7357 is a multi-function kit that includes a transmitter and a plug-in chime unit. The transmitter listens for your existing doorbell's sound and sends a wireless signal to the chime unit. The chime unit then plays one of three selectable tunes, alerting you to visitors. This system is compatible with all Heath Zenith branded wireless push buttons, doorbells, and alerts.

2.1 Key Features

  • Wireless Extension: Extends doorbell coverage without additional wiring.
  • Plug-In Chime: The chime unit plugs into any standard wall socket for convenience.
  • Extended Range: Offers a transmission range of up to 100 feet (30 meters).
  • Adjustable Volume: Customize the chime volume to suit your environment.
  • Multiple Tunes: Choose from 3 distinct chime tunes.
  • Easy Installation: Simple setup with minimal tools required.

2.2 Package Contents

Verify that all components are present in your package:

  • Plug-in Doorbell Chime Unit
  • Extension Transmitter Unit
  • Hardware Pack (screws, anchors, double-sided tape)
  • Instruction Manual

Note: 3 AAA batteries for the transmitter are not included and must be purchased separately.

Heath Zenith SL-7357 Wireless Plug-In Door Chime Extender Kit

Figure 1: Heath Zenith SL-7357 Wireless Plug-In Door Chime Extender Kit. This image displays the complete kit, including the plug-in chime unit and the wireless transmitter.

3. Setup Instructions

Follow these steps to set up your Heath Zenith SL-7357 Door Chime Extender.

3.1 Transmitter Installation

  1. Insert Batteries: Open the battery compartment on the back of the transmitter unit. Insert 3 AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
  2. Position Transmitter: Place the transmitter unit near your existing wired doorbell chime. The microphone on the transmitter needs to be close enough to detect the sound of your doorbell. For optimal performance, position it within 1-2 inches of the chime's sound mechanism (e.g., the bells or bars).
  3. Mount Transmitter: Use the provided double-sided tape or screws from the hardware pack to secure the transmitter in place. Ensure it is stable and its microphone is facing the sound source of your existing doorbell.
  4. Adjust Sensitivity: The transmitter may have a sensitivity adjustment dial or switch. Start with a medium setting and adjust as needed during testing to ensure reliable detection of your doorbell's chime.
Heath Zenith SL-7357 Wireless Transmitter Unit

Figure 2: Heath Zenith SL-7357 Wireless Transmitter Unit. This image shows the compact transmitter unit, which detects the sound of your existing doorbell.

3.2 Plug-In Chime Unit Setup

  1. Select Location: Choose a standard wall outlet in the area where you want to hear the extended chime. Ensure this location is within 100 feet (30 meters) of the transmitter for optimal signal reception.
  2. Plug In Chime: Insert the plug-in chime unit into the selected wall outlet.
  3. Select Tune: Locate the tune selection button on the chime unit. Press this button repeatedly to cycle through the 3 available chime tunes until you find your preferred sound.
  4. Adjust Volume: Use the volume control button or dial on the chime unit to set the desired sound level.

3.3 Testing the System

After installing both units, test the system to ensure proper functionality:

  1. Press your existing doorbell button.
  2. Listen for your original doorbell chime.
  3. Simultaneously, the plug-in chime unit should activate and play the selected tune.
  4. If the chime unit does not activate, refer to the Troubleshooting section. You may need to adjust the transmitter's sensitivity or reposition it closer to your existing doorbell.

4. Operating Instructions

Once set up, the Heath Zenith SL-7357 operates automatically. When your existing doorbell rings, the transmitter detects the sound and sends a wireless signal to the plug-in chime unit, which then sounds.

4.1 Changing Chime Tune

To change the chime tune, simply press the tune selection button on the plug-in chime unit. Each press will cycle to the next available tune. Release the button when your desired tune is playing.

4.2 Adjusting Volume

To adjust the volume of the chime, use the volume control button or dial located on the plug-in chime unit. Increase or decrease the volume to your preference.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your door chime extender.

5.1 Battery Replacement (Transmitter)

The transmitter unit requires 3 AAA batteries. Replace these batteries annually or when you notice a decrease in performance or unreliable activation. To replace:

  1. Open the battery compartment on the back of the transmitter.
  2. Remove the old batteries and dispose of them responsibly.
  3. Insert 3 new AAA batteries, observing correct polarity.
  4. Close the battery compartment securely.
  5. Test the system after battery replacement.

5.2 Cleaning

Clean the exterior of both the transmitter and chime units with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or internal components. Ensure no moisture enters the units.

5.3 Environmental Considerations

Avoid exposing the units to extreme temperatures, direct sunlight, or excessive moisture. These conditions can affect performance and lifespan.

6. Troubleshooting

If you experience issues with your Heath Zenith SL-7357, consult the following table for common problems and solutions.

ProblemPossible CauseSolution
Chime unit does not sound when doorbell rings.
  • Transmitter batteries are low or dead.
  • Transmitter is too far from the existing doorbell chime.
  • Transmitter sensitivity is set too low.
  • Chime unit is out of range of the transmitter.
  • Chime unit is not plugged in or power outlet is not working.
  • Interference from other wireless devices.
  • Replace transmitter batteries (3 AAA).
  • Reposition transmitter closer to the existing doorbell chime.
  • Adjust transmitter sensitivity to a higher setting.
  • Move chime unit closer to the transmitter (within 100 ft/30m).
  • Ensure chime unit is securely plugged into a working outlet.
  • Try moving units away from other electronics.
Chime unit sounds randomly or without doorbell activation.
  • Transmitter sensitivity is set too high.
  • External noise sources are activating the transmitter.
  • Adjust transmitter sensitivity to a lower setting.
  • Reposition transmitter away from loud noises (e.g., construction, loud music).
Chime volume is too low or too high.
  • Volume setting on chime unit needs adjustment.
  • Use the volume control on the plug-in chime unit to adjust.

If the problem persists after trying these solutions, please contact customer support.

7. Specifications

FeatureDetail
Model NumberSL-7357
ManufacturerGlobe Electric
Product Dimensions1.38 x 3.5 x 5.13 inches (approximate)
Item Weight1.6 ounces (approximate)
Power Source (Chime)Standard AC Wall Outlet (Plug-in)
Power Source (Transmitter)3 x AAA Batteries (not included)
Transmission RangeUp to 100 feet (30 meters)
Number of Tunes3
MaterialPlastic
ColorWhite

8. Warranty & Support

8.1 Limited Warranty

The Heath Zenith SL-7357 Wireless Plug-In Door Chime Extender is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, unauthorized repairs, or acts of nature. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Globe Electric customer support. Refer to the product packaging or the official Globe Electric website for the most current contact information.

Online Resources: For additional support and FAQs, visit the Globe Electric Store on Amazon.

© 2023 Globe Electric. All rights reserved. Heath Zenith is a brand of Globe Electric.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.