Krylon K07010 All-Purpose Spray Adhesive User Manual

Product Overview

The Krylon K07010 11-Ounce All-Purpose Spray Adhesive is designed for bonding various materials, creating a smooth, flexible, and non-wrinkling bond. Its extended open-tack time is beneficial for larger projects, and it will not bleed through materials. This adhesive is suitable for a wide range of craft and art applications.

Image: Front view of the Krylon K07010 11-Ounce All-Purpose Spray Adhesive can, highlighting its "All-Purpose" and "7010" model number, along with features like "Superior strength" and "Acid-free/archival-safe."

Safety Information

WARNING: This product is extremely flammable and its contents are under pressure. Read and follow all instructions and warnings on the product label before use. Failure to do so may result in serious injury or property damage.

• Ventilation: Use in a well-ventilated area. Avoid breathing vapors.
• Ignition Sources: Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
• Eye and Skin Protection: Wear appropriate eye protection (safety glasses) and protective gloves to prevent contact.
• Pressurized Container: Do not puncture or incinerate container, even after use. Do not expose to temperatures exceeding 120°F (49°C).
• First Aid:
  • Eye Contact: Flush immediately with plenty of water for at least 15 minutes. Get medical attention if irritation persists.
  • Skin Contact: Wash thoroughly with soap and water. Remove contaminated clothing.
  • Inhalation: If experiencing difficulty breathing, move to fresh air. If breathing stops, administer artificial respiration and seek immediate medical attention.
  • Ingestion: Do NOT induce vomiting. Call a poison control center or doctor immediately.
• California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Setup and Preparation

1. Surface Preparation: Ensure all surfaces to be bonded are clean, dry, and free of dust, grease, oil, wax, and loose particles. For best results, surfaces should be smooth.
2. Protect Surrounding Area: Cover adjacent areas and objects to protect them from overspray. Use drop cloths or newspaper.
3. Shake Can Thoroughly: Shake the aerosol can vigorously for at least one minute after the mixing ball begins to rattle. Continue to shake occasionally during use.
4. Test Application: Always test the adhesive on an inconspicuous area or scrap material first to ensure compatibility and desired results.

Compatible Materials

Krylon All-Purpose Spray Adhesive is compatible with a wide range of materials, including:

• Cardboard
• Ceramic
• Fabric
• Glass
• Metal
• Paper
• Plastic
• Wood
• Balsa Wood
• Felt
• Photos

Image: A collage showing various materials suitable for projects, including metal, plastic, wicker, and glass/ceramic, demonstrating the versatility of the adhesive.

Operating Instructions (Application)

1. Hold Can Correctly: Hold the can upright, 8 to 10 inches (20-25 cm) from the surface.
2. Apply Evenly: Apply a light, even coat of adhesive to one or both surfaces, depending on the desired bond strength and repositionability. For a stronger, permanent bond, apply to both surfaces. For a temporary or repositionable bond, apply a lighter coat to one surface.
3. Allow Tack Time: Allow the adhesive to become tacky before joining surfaces. This typically takes 10-15 seconds. The extended open-tack time allows for repositioning, especially useful for larger projects.
4. Join Surfaces: Carefully align and press the surfaces together firmly. Smooth out any air bubbles or wrinkles from the center outwards.
5. Drying and Curing: The adhesive will dry to the touch quickly. Full cure time is approximately 30 minutes. Avoid disturbing the bonded materials during the curing process.

Maintenance

• Clean Nozzle After Use: To prevent clogging, after each use, invert the can and spray for 2-3 seconds until only clear propellant comes out. Wipe the nozzle clean with a cloth.
• Storage: Store the can in a cool, dry place away from direct sunlight, heat sources, and open flames. Do not store at temperatures above 120°F (49°C). Keep out of reach of children and pets.

Troubleshooting

Specifications

Warranty and Support

Specific warranty information for the Krylon K07010 All-Purpose Spray Adhesive is not provided in this manual. For detailed warranty terms, product support, or technical assistance, please contact Krylon directly through their official website or customer service channels.

You can visit the official Krylon website for more information: Krylon Official Store