Introduction
The Better Living AVIVA Three Chamber Dispenser is designed to provide an organized and convenient solution for your bath and shower. This dispenser helps eliminate bottle clutter and offers easy access to your favorite liquids. It features a durable, water-resistant construction and integrated hooks for additional storage.
Setup and Installation
The AVIVA dispenser is designed for quick and tool-free installation, ensuring no damage to your walls.
- Step 1: Clean Surface
Ensure the installation surface is clean, dry, and free of soap scum or residue. - Step 2: Place Double-Sided Tape
Apply the included waterproof double-sided tape to the back of the mounting bracket. - Step 3: Apply Silicone Adhesive
Apply the included waterproof silicone adhesive to the back of the mounting bracket, ensuring even coverage. - Step 4: Mount Wall Bracket
Firmly press the bracket onto the desired clean surface. - Step 5: Wait 24 Hours
Allow the adhesive to cure for a full 24 hours before placing the dispenser chambers. This ensures a secure bond. - Step 6: Set Dispenser Chambers
Slide the individual dispenser chambers onto the mounted bracket. - Step 7: Fill & Enjoy
Open the tops of the chambers and fill with your desired liquids.
Image: Step-by-step installation guide for the AVIVA dispenser.
Image: Individual chambers are easy to remove and refill. Each chamber holds up to 11 fl oz (325 ml).
Operating Instructions
Using your AVIVA dispenser is simple and efficient.
Dispensing Liquids
- Place your hand under the dispenser outlet.
- Press the large button on the front of the desired chamber.
- A pre-measured amount of liquid will be dispensed. Repeat if more is needed.
Image: Effortless one-handed dispensing of liquids.
Refilling Chambers
- Gently lift the individual chamber upwards from the mounting bracket to remove it.
- Open the top lid of the chamber.
- Pour your desired liquid (shampoo, conditioner, body wash, etc.) into the chamber.
- Close the top lid securely and slide the chamber back onto the mounting bracket.
Maintenance
Regular cleaning and proper care will ensure the longevity and optimal performance of your dispenser.
- Cleaning: The individual chambers can be easily lifted off the wall for thorough cleaning. Use mild soap and water to clean the exterior and interior of the chambers. Avoid abrasive cleaners.
- Material: The housing is constructed from durable, water-resistant ABS plastic with a high-quality chrome finish, guaranteed to be rust-free.
- Refilling: Always ensure the chambers are properly seated on the bracket after refilling to prevent accidental detachment.
Image: The dispenser features a high-quality chrome finish that is rust-proof.
Troubleshooting
Priming the Pumps
If the dispenser is new or has been empty, you may need to prime the pumps to initiate liquid flow:
- Depress the button of the desired chamber.
- Place your finger over the outlet to block airflow.
- Release the button, then remove your finger.
- Repeat this process several times until liquid begins to flow consistently.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 76345 |
| Color | Chrome |
| Material | Durable, water-resistant ABS plastic with chrome finish |
| Product Dimensions | 3.25"L x 2"W x 7"H |
| Liquid Volume (per chamber) | Approximately 325 ml (11 fl oz) |
| Number of Chambers | 3 |
| Installation | Tool-free, using waterproof silicone adhesive and 2-way tape |
| Additional Features | Integrated hooks for razors and accessories |
Image: Dispenser dimensions: 11.13 inches wide, 7 inches high, 3.5 inches deep.
Image: Integrated hooks provide convenient storage for razors and loofahs.
Warranty and Support
The AVIVA Three Chamber Shower Dispenser comes with a Lifetime Pump Warranty. For any support or warranty claims, please refer to the manufacturer's official website or contact their customer service directly.
Manufacturer: Better Living