Case Logic Digital Starter Kit Bundle

Introduction

This instruction manual provides essential information for the proper use and maintenance of your Case Logic Digital Starter Kit Bundle, model pvb-4. This kit is designed to protect and organize your digital camera or camcorder and its accessories. Please read this manual thoroughly before using the product.

Package Contents

The Case Logic Digital Starter Kit Bundle (pvb-4) includes the following components:

• One (1) TBC-4 Compact Camcorder/Digital Camera Bag
• One (1) DMC-2 Koskin Digital Memory Case
• One (1) Mini Tripod
• Cable Ties
• Protective Sleeves
• Lens Cleaner

Image: Overview of the Case Logic Digital Starter Kit Bundle, showing the camera bag, memory case, tripod, and other accessories.

Setup

TBC-4 Compact Camcorder/Digital Camera Bag

1. Open the main compartment zipper.
2. Carefully place your digital camera or camcorder into the main compartment. Ensure it fits snugly without excessive force.
3. Utilize the accessory pockets for storing batteries, cables, or other small items.
4. Adjust the shoulder strap for comfortable carrying.

Image: A digital camera securely placed inside the main compartment of the Case Logic TBC-4 camera bag, demonstrating proper storage.

DMC-2 Koskin Digital Memory Case

1. Unzip the memory case.
2. Insert up to six memory cards into the designated slots. Ensure the cards are fully seated to prevent them from falling out.
3. Zip the case closed to secure the memory cards.

Image: The Case Logic DMC-2 digital memory case open, displaying six memory cards securely stored in its internal compartments.

Mini Tripod

1. Extend the three legs of the tripod to form a stable base.
2. Locate the universal screw mount at the top of the tripod.
3. Align the screw mount with the tripod socket on the bottom of your camera or camcorder.
4. Rotate the camera clockwise until it is securely fastened to the tripod. Do not overtighten.

Image: The compact Case Logic mini tripod with its three legs extended, ready for camera attachment.

Operating Instructions

Using the TBC-4 Camera/Camcorder Bag

The TBC-4 bag provides protection and organization for your camera equipment. Use the main compartment for your camera/camcorder and the zippered accessory pockets for smaller items like spare batteries, charging cables, or the included lens cleaner. The mesh side pocket can hold additional small accessories or a lens cap. The adjustable shoulder strap allows for comfortable transport.

Using the DMC-2 Digital Memory Case

The DMC-2 case is designed to protect your valuable digital memory cards from dust, scratches, and impact. Store up to six memory cards (e.g., SD cards, CompactFlash cards) in the individual elasticized slots. Always ensure the case is zipped closed when not in use to prevent loss or damage to the cards.

Image: The Case Logic DMC-2 digital memory case open, showing two SD cards inserted into its internal slots.

Using the Mini Tripod

The mini tripod provides a stable platform for your camera or camcorder, ideal for still shots, low-light conditions, or self-portraits. Once your camera is securely attached, place the tripod on a flat, stable surface. Adjust the camera's angle as needed. For optimal stability, ensure all three legs are fully extended and evenly supported.

Maintenance

Cleaning the Bag and Memory Case

• Wipe the exterior surfaces with a damp cloth and mild soap if necessary.
• Do not use harsh chemicals or abrasive cleaners, as these may damage the material.
• Allow to air dry completely before storing equipment.

Cleaning Lenses and Screens

• Use the included lens cleaner and a soft, lint-free cloth (not included) to gently wipe camera lenses and screens.
• Avoid applying excessive pressure.

Troubleshooting

• Camera does not fit in bag: Ensure your camera's dimensions are compatible with the TBC-4 bag. Do not force the camera into the compartment.
• Memory cards loose in case: Verify that memory cards are fully inserted into their respective slots in the DMC-2 case. Close the zipper completely.
• Tripod unstable: Ensure the tripod legs are fully extended and placed on a flat, level surface. Confirm the camera is securely attached to the tripod mount.

Specifications

Warranty and Support

For information regarding warranty coverage or product support, please refer to the documentation included with your purchase or visit the official Case Logic website. You may also contact Case Logic customer service directly for assistance.