1. Introduction
Howard Feed-N-Wax Wood Polish & Conditioner is formulated to preserve and enhance wood finishes. This product helps prevent wood from drying out and cracking by introducing natural oils, while leaving a protective coating of Brazilian carnauba wax and beeswax. It is suitable for use on both finished and unfinished wood surfaces, enhancing their natural beauty and depth of grain.
Image 1.1: Howard Feed-N-Wax 8 oz bottle, featuring beeswax and orange oil.
2. Product Features
- Polishes all wood surfaces to a soft luster.
- Provides a protective coating of Carnauba Wax and Beeswax.
- Suitable for antiques, dining tables, kitchen cabinets, wood doors, and trim.
- Unique blend of beeswax, carnauba wax, and orange oil enhances natural beauty and grain depth.
- Helps prevent further drying of all wood finishes.
- Ideal for maintaining restored wood finishes.
3. Safety Information
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is for external use on wood surfaces only. Keep out of reach of children and pets. Avoid contact with eyes. In case of contact, rinse thoroughly with water. If swallowed, seek medical attention immediately. Use in a well-ventilated area.
4. Application Instructions
4.1. Preparation
- Ensure the wood surface is clean and free of dust and debris.
- For best results, apply to a dry surface.
- Test on an inconspicuous area first to ensure desired results.
4.2. Application Steps
- Apply Feed-N-Wax liberally with a clean, soft cloth.
- Allow the product to penetrate the wood for at least 20 minutes. For very dry or faded finishes, allow more time for penetration.
- Wipe off any excess with a clean, soft cloth.
- Buff the surface to a soft luster.
Image 4.1: A hand applying Feed-N-Wax to a wooden surface, illustrating the immediate enhancement.
Image 4.2: An antique wooden chair, with one half treated and the other untreated, demonstrating the product's restorative effect.
4.3. Maintenance
Feed-N-Wax may be used every month or so, or whenever the finish appears faded or dry. Regular application helps maintain the wood's natural moisture and protective coating.
Image 4.3: An outdoor wooden table, half treated with Feed-N-Wax, highlighting the difference in appearance and protection.
5. Troubleshooting
- Faded or Dry Finish: If the wood finish appears faded or dry, apply Feed-N-Wax as directed, allowing it to penetrate for a longer period (e.g., several hours or overnight) before wiping and buffing.
- Uneven Application: Ensure even application with a clean, soft cloth. If streaks occur, reapply a small amount and buff immediately with a fresh cloth.
- Excess Product: Always wipe off excess product thoroughly to prevent a sticky residue. If residue occurs, re-wipe with a clean cloth or a very small amount of fresh Feed-N-Wax to re-liquefy and remove.
Image 5.1: A wooden cabinet showing a 'before' (ANTES) and 'after' (DESPUES) comparison after treatment.
Image 5.2: A wooden door showing a 'before' (ANTES) and 'after' (DESPUES) comparison after treatment.
6. Product Specifications
| Specification | Detail |
|---|---|
| Brand | HOWARD |
| Item Model Number | FW0008 |
| Product Dimensions | 2 x 2 x 7.25 inches |
| Item Weight | 7.05 ounces |
| Item Form | Liquid |
| Specific Uses For Product | Inside |
| Recommended Uses For Product | For Polishing, Removes Oxidation |
| Number of Items | 1 |
