Air King 9012 Commercial Grade Oscillating Wall Mount Fan - User Manual

Introduction

The Air King Commercial Grade Oscillating Wall Mount Fan, Model 9012, is designed to provide efficient air circulation in various settings such as workshops, health clubs, stores, classrooms, and offices. Its wall-mounted design helps conserve floor and table space. This manual provides essential information for the safe and effective installation, operation, and maintenance of your fan.

Figure 1: Front view of the Air King 9012 Wall Mount Fan.

Safety Information

Please read all safety instructions carefully before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always unplug the fan from the power outlet before cleaning, servicing, or moving it.
• Do not operate the fan with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel.
• Do not run the power cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange the cord away from traffic areas where it will not be tripped over.
• This fan is for indoor use only. Do not use outdoors or in wet locations.
• Do not insert fingers or any other objects through the grill when the fan is operating.
• Ensure the fan is mounted securely to a wall stud or appropriate anchor to prevent falling.
• Keep children and pets away from the fan during operation.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).

Package Contents

Verify that all components are present before beginning installation:

• Air King 9012 Wall Mount Fan Unit
• Wall Mounting Bracket
• Hardware for Mounting (screws, anchors)
• User Manual (this document)

Setup and Installation

Follow these steps to properly set up and install your Air King wall mount fan.

1. Assembly

1. Carefully remove all components from the packaging.
2. Attach the rear grill to the motor housing, ensuring it clicks securely into place.
3. Slide the fan blade onto the motor shaft, aligning the flat side of the shaft with the corresponding slot on the blade. Secure with the provided cap or nut.
4. Attach the front grill to the rear grill, ensuring all clips or screws are fastened to secure it.

Figure 2: Fan head assembly, showing the metal front grill and plastic blade.

2. Wall Mounting

Choose a suitable location on a sturdy wall, preferably where a wall stud can be located for secure mounting. Ensure there is a power outlet within reach of the 7-foot power cord.

1. Hold the wall mounting bracket against the wall at the desired height and mark the screw hole locations.
2. Drill pilot holes at the marked locations. If mounting into drywall without a stud, use appropriate wall anchors.
3. Secure the mounting bracket to the wall using the provided screws.
4. Carefully hang the assembled fan unit onto the secured wall mounting bracket. Ensure it is firmly seated and stable.

Figure 3: Example of the fan mounted on a wall, demonstrating its space-saving design.

Figure 4: The fan seamlessly integrated into a home environment, mounted on a wall.

Operating Instructions

Your Air King 9012 fan features simple controls for ease of use.

Power and Speed Control

The fan is equipped with a front-mounted rotary switch and a pull cord for convenient operation.

• Rotary Switch: Turn the knob to select desired speed settings (1, 2, 3) or to turn the fan off (0).
• Pull Cord: Pull the cord repeatedly to cycle through the speed settings: High (3), Medium (2), Low (1), and Off (0).

Figure 5: Detail of the fan's control panel, showing the rotary switch and pull cord.

Oscillation Function

The fan offers a 90-degree oscillation feature to distribute air over a wider area.

• To activate oscillation, locate the oscillation knob/pin on the top or rear of the motor housing and pull it up.
• To stop oscillation and lock the fan in a stationary position, push the oscillation knob/pin down.

Tilt Adjustment

The fan head can be tilted to direct airflow up or down.

• Loosen the adjustment screw located on the side of the fan head.
• Adjust the fan head to the desired angle.
• Tighten the adjustment screw to secure the fan head in position.

Figure 6: The fan features a tilt-back head for adjustable airflow direction.

Maintenance

Regular cleaning and maintenance will ensure optimal performance and longevity of your fan.

• Cleaning: Always unplug the fan before cleaning. Use a soft, damp cloth to clean the exterior surfaces. Do not use harsh chemicals or abrasive cleaners. For the fan blades and interior of the grills, you may need to remove the front grill (refer to assembly instructions in Setup section) to wipe away dust and debris.
• Motor: The motor is permanently lubricated and requires no additional oiling.
• Storage: If storing the fan for an extended period, cover it to protect from dust and store in a dry place.

Troubleshooting

If your fan is not operating correctly, consult the following common issues and solutions:

Specifications

Detailed technical specifications for the Air King 9012 Wall Mount Fan:

• Model: 9012
• Blade Diameter: 12 Inches
• Motor: 3-Speed, 1/50 HP, 120V, 1 phase, permanently lubricated, permanent split capacitor motor
• Air Flow Capacity: 930 Cubic Feet Per Minute (CFM)
• RPMs (High, Medium, Low): 1,450, 1,300, 1,090
• Amps (High, Medium, Low): 0.4, 0.3, 0.27
• Watts (High, Medium, Low): 114, 85, 63
• Power Cord: White, 7-foot, 3-conductor, SPT-2-R type
• Oscillation: 90 degrees (lockable in non-oscillating position)
• Construction: Metal front grill, impact resistant plastic rear grill, chemical resistant polypropylene blade
• Dimensions (D x W x H): 14.25"D x 15.68"W x 20.75"H
• Item Weight: 3 Pounds
• Certifications: ETL and OSHA compliant; Tested in accordance with AMCA standard 230.99

Figure 7: Key dimensions and weight of the Air King 9012 fan.

Figure 8: Visual representation of key features: 12-inch blades, 3 quiet speeds, and metal front grill.

Warranty and Support

Warranty: The Air King 9012 Commercial Grade Oscillating Wall Mount Fan comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Support: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Air King customer service. Refer to the contact information provided on the product packaging or the official Air King website.