VIBCO BVS-130 Silent Pneumatic Turbine Vibrator User Manual

Product Overview

Image: The VIBCO BVS-130 Silent Pneumatic Turbine Vibrator, featuring a robust grey housing, two threaded air ports on top, and two mounting feet with bolt holes. A central orange label displays the VIBCO logo and model number BVS-130.

The VIBCO BVS-130 Silent Pneumatic Turbine Vibrator is engineered for industrial applications requiring efficient and quiet material flow. This unit delivers 75 lbs. of vibratory force at 10,500 VPM, utilizing VIBCO's patented silent turbine design. It is designed to replace traditional loud ball and piston-style vibrators, offering a quieter operation at approximately 70dB on an A-scale at 1 meter. The BVS-130 features a durable, lightweight, and corrosion-resistant aluminum housing with a 2-bolt foot mount, providing a 4-inch center-to-center mounting hole pattern for easy installation. It operates on clean, dry air at 60-80 psi and consumes 5.5 CFM. The unit is pre-lubricated for life, minimizing maintenance requirements. A threaded exhaust port allows for the attachment of a muffler (sold separately) or piping away exhausted air up to 10 feet.

Key Features

• Non-corrosive, composite housing with single bolt mount for easy installation.
• Pre-lubricated for the life of the unit, eliminating mess and maintenance.
• Utilizes VIBCO's patented, silent turbine technology for quality and reliable performance.
• Operates at 70dB on an A-scale at 1 meter for virtually silent operation.
• Designed to replace messy, loud piston and ball-style vibrators.

What's Included

The VIBCO BVS-130 package typically includes the following:

• 1 x VIBCO BVS-130 Silent Pneumatic Turbine Vibrator

Note: Accessories such as mufflers, air filters, and regulators are sold separately.

Setup and Installation

Proper installation is crucial for the optimal performance and longevity of your VIBCO BVS-130 vibrator. Follow these guidelines:

1. Mounting Location: Select a sturdy, flat surface on the equipment or structure where vibration is required. The BVS-130 features a 2-bolt foot mount with 4-inch center-to-center mounting holes. Ensure the mounting surface can withstand the vibratory force.
2. Secure Mounting: Attach the vibrator securely using appropriate bolts and hardware (not included) through the mounting holes. Ensure all connections are tight to prevent loosening during operation.
3. Air Supply Connection: Connect a clean, dry air supply line to the vibrator's inlet port. The vibrator requires an air pressure of 60-80 psi. It is highly recommended to use a filter regulator (sold separately) in the air supply line to ensure the air is clean and the pressure is regulated for optimum life and performance.
4. Exhaust Management: The BVS-130 has a threaded exhaust port. For noise reduction or to direct exhaust away, a muffler (sold separately) can be attached, or the exhausted air can be piped away up to 10 feet using appropriate tubing.
5. Pre-Operation Check: Before initial operation, double-check all connections for tightness and ensure the air supply is free of moisture and contaminants.

Safety Note: Always disconnect the air supply before performing any installation, maintenance, or inspection. Wear appropriate personal protective equipment (PPE) during installation and operation.

Operating Instructions

The VIBCO BVS-130 is designed for straightforward operation once properly installed.

1. Air Supply: Ensure your air compressor and air line system can provide a continuous supply of clean, dry air at the recommended pressure of 60-80 psi. The vibrator consumes approximately 5.5 CFM.
2. Activation: Once the air supply is connected and regulated, open the air valve to begin operation. The vibrator will immediately start producing vibratory force.
3. Deactivation: To stop the vibrator, simply close the air supply valve.
4. Performance Adjustment: The vibratory force and frequency are primarily determined by the air pressure. Adjusting the air pressure within the 60-80 psi range can fine-tune the vibrator's performance to suit specific application needs.

Important: Operating the vibrator outside the recommended air pressure range may affect performance and lifespan. Always use clean, dry air to prevent internal damage.

Maintenance

The VIBCO BVS-130 Silent Pneumatic Turbine Vibrator is engineered for minimal maintenance due to its design features.

• Pre-Lubricated for Life: This unit is pre-lubricated at the factory and does not require additional lubrication throughout its operational life. This eliminates the need for messy and routine lubrication maintenance.
• Clean Air Supply: The most critical maintenance aspect is ensuring a continuous supply of clean, dry air. Contaminants and moisture in the air supply can degrade internal components over time. Regularly check and maintain your air filter and dryer (if applicable).
• Periodic Inspection: Periodically inspect the vibrator and its mounting for any signs of wear, damage, or loose connections. Ensure the mounting bolts remain tight.
• Exhaust Port: Ensure the exhaust port remains clear of obstructions to allow for proper airflow.

Caution: Do not attempt to disassemble the vibrator. Contact VIBCO customer support for any internal issues or repairs.

Troubleshooting

If you encounter issues with your VIBCO BVS-130 vibrator, consider the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact VIBCO customer support for further assistance.

Technical Specifications

Warranty and Support

VIBCO stands behind the quality of its products. For specific warranty information regarding your BVS-130 Silent Pneumatic Turbine Vibrator, please refer to the warranty documentation provided with your purchase or visit the official VIBCO website.

For technical support, parts, or service inquiries, please contact VIBCO customer service directly. When contacting support, please have your model number (BVS-130) and any relevant purchase information ready.

VIBCO Contact Information:
www.vibco.com
(Specific contact details like phone numbers or email addresses are typically found on the manufacturer's official website or product packaging.)