Product Overview
The Walker 54079 Exhaust Tail Pipe is engineered for specific vehicle applications, providing a direct-fit replacement for the original equipment. Constructed from durable aluminized steel, this tail pipe is designed to resist corrosion and ensure long-lasting performance. Its precision-bent design and OE-style routings facilitate a straightforward installation process.
This tail pipe is compatible with the following vehicles:
- 1996 Jeep Grand Cherokee
- 1997 Jeep Grand Cherokee
- 1998 Jeep Grand Cherokee
Always verify compatibility with your specific vehicle's year, make, model, engine, and trim before installation.
Safety Information
Always prioritize safety when working on your vehicle. Wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection. Ensure the vehicle is securely supported on jack stands or a lift. Allow the exhaust system to cool completely before beginning any work to prevent burns. Work in a well-ventilated area.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Setup and Preparation
- Gather Tools: You will need basic hand tools such as wrenches, sockets, a ratchet, a penetrating lubricant, and potentially a cutting tool for rusted components.
- Vehicle Lift: Safely lift and support the vehicle using a hydraulic lift or sturdy jack stands on a level surface. Ensure the vehicle is stable before proceeding.
- Cool Down: Allow the exhaust system to cool completely to avoid burns.
- Inspect Existing System: Examine the current tail pipe and surrounding exhaust components for rust, damage, or worn hangers. Note how the existing pipe is routed and connected.
- Apply Lubricant: Apply penetrating lubricant to all bolts, nuts, and hangers that need to be removed. Allow time for the lubricant to penetrate.
Installation Instructions
The Walker 54079 tail pipe is designed for direct-fit installation. Follow these general steps:
- Remove Old Tail Pipe:
- Loosen or cut the clamps connecting the old tail pipe to the muffler or intermediate pipe.
- Carefully detach the tail pipe from its hangers. You may need a pry tool or specialized hanger removal tool.
- Remove the old tail pipe from under the vehicle.
- Prepare for New Installation:
- Clean any rust or debris from the connection point on the muffler or intermediate pipe.
- Inspect and replace any worn or damaged exhaust hangers or rubber isolators.
- Install New Tail Pipe:
- Position the new Walker 54079 tail pipe under the vehicle.
- Connect the tail pipe to the muffler or intermediate pipe, ensuring a snug fit. Use new exhaust clamps if necessary.
- Attach the tail pipe to the existing hangers. The OE-style routings and hangers are designed for easy alignment.
- Ensure the pipe has adequate clearance from the vehicle's chassis, suspension components, and fuel lines.
- Tighten Connections:
- Once the tail pipe is properly aligned and secured in the hangers, tighten all clamps and connections to specification.
- Do not overtighten, as this can damage the pipes or clamps.
- Final Check:
- Lower the vehicle.
- Start the engine and check for any exhaust leaks. Leaks can often be identified by a hissing sound or by feeling for escaping gases.
- If leaks are present, re-check connections and tighten as needed.
Image: Examples of Walker direct-fit exhaust pipes, illustrating various bends and connection points.
Image: Various exhaust hardware and accessories, including clamps and pipe connectors, essential for installation.
Maintenance
Regular inspection of your exhaust system can help identify potential issues early and extend its lifespan.
- Visual Inspection: Periodically check the tail pipe and other exhaust components for signs of rust, cracks, dents, or loose connections.
- Hanger Check: Ensure all exhaust hangers and rubber isolators are intact and securely holding the system in place. Replace any worn or broken hangers.
- Leak Detection: Listen for unusual noises (hissing, rattling) that might indicate an exhaust leak or a loose component.
- Cleaning: While not strictly necessary, cleaning the exterior of the tail pipe can prevent buildup of road grime and salt, especially in harsh climates.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Exhaust Leak | Loose clamps, damaged gasket, crack in pipe. | Tighten clamps, replace gasket, inspect pipe for damage and replace if necessary. |
| Rattling Noise | Loose hangers, exhaust pipe hitting chassis, internal muffler baffle loose. | Inspect and secure hangers, adjust pipe clearance, or replace affected component. |
| Pipe Does Not Fit Correctly | Incorrect part for vehicle, manufacturing variation, existing components misaligned. | Double-check part number and vehicle compatibility. Ensure existing components are correctly aligned. Contact supplier if fitment issues persist. |
Specifications
- Model Number: 54079
- Material: Aluminized Steel (Alloy Steel)
- Inlet (OD): 2.25 inches (as per product title)
- Installation Type: Bolt-On
- Product Dimensions: Approximately 58 x 11 x 9 inches (packaging dimensions, actual pipe dimensions may vary)
- Item Weight: Approximately 8 ounces (likely shipping weight, actual pipe weight will be higher)
- Vehicle Service Type: Car
- Manufacturer: Tenneco (Dynomax, Walker, Thrush)
Image: Diagram illustrating the components of a complete exhaust system, including manifold converters, oxygen sensors, catalytic converters, resonator assemblies, and mufflers.
About Walker Exhaust Systems
Walker has been a leader in exhaust system technology for over a century, committed to manufacturing high-quality parts that meet or exceed original equipment standards. Their focus on precision engineering and consistent compliance ensures reliable performance and durability.
Video: "Walker Exhaust Systems | The Walker Way" - This video provides an overview of Walker's commitment to quality, precision, and compliance in manufacturing exhaust system components.
Warranty and Support
For specific warranty information and technical support regarding your Walker 54079 Exhaust Tail Pipe, please refer to the official Walker website or contact their customer service department. Keep your purchase receipt as proof of purchase.
Manufacturer: Tenneco (Dynomax, Walker, Thrush)
Contact: Refer to the official Walker website for the most current contact information and support resources.
