Parmak DF-SP-LI Solar-Powered Electric Fencer User Manual

Product Overview

The Parmak DF-SP-LI Electric Fencer is a solar-powered, low-impedance fence charger designed for outdoor installation. It utilizes a 6-volt rechargeable battery, charged by an integrated solar panel, to deliver a reliable shock across up to 25 miles of fencing. This weatherproof unit is ideal for managing livestock such as cattle, horses, pigs, and dogs in small to medium pastures.

Key Features:

• Operates for up to 21 days in total darkness.
• Weatherproof design for durable outdoor use.
• Suitable for small to medium pastures.
• Includes a sealed, rechargeable 6-volt battery.
• Charges up to 25 miles of fence with 1.6 joules of output.
• Recommended for cattle, horses, pigs, and dogs.

Image: The Parmak DF-SP-LI Electric Fencer, showcasing its compact design and integrated solar panel, ready for outdoor installation.

Setup Instructions

1. Unpack and Inspect: Carefully remove the fencer from its packaging. Inspect the unit for any visible damage.
2. Choose Location: Select a location for the fencer that receives maximum direct sunlight throughout the day to ensure optimal charging of the solar panel. Avoid shaded areas.
3. Install Ground Rod: Drive a galvanized ground rod (not included) at least 6 feet deep into moist soil near the fencer. For best performance, especially in dry conditions, consider using multiple ground rods spaced at least 10 feet apart and connected in series.
4. Connect Ground Wire: Connect one end of a heavy-duty insulated wire to the ground terminal (typically marked with a black or negative symbol) on the fencer. Connect the other end securely to the ground rod.
5. Connect Fence Wire: Connect one end of an insulated wire to the positive terminal (typically marked with a red or positive symbol) on the fencer. Connect the other end to your electric fence line. Ensure all connections are tight and secure.
6. Position Solar Panel: Angle the solar panel to face the sun for maximum exposure. The panel is designed to be durable and weatherproof.

Operating the Fencer

The Parmak DF-SP-LI operates with a simple on/off switch and provides a pulsed shock to the fence line. You can typically hear a distinct clicking sound indicating proper operation.

1. Turn On: Locate the push on/off switch on the front of the unit. Push the switch to the 'ON' position.
2. Listen for Pulse: Once turned on, the fencer will begin to emit a regular clicking sound, indicating that it is sending pulses of electricity through the fence. This is a normal operational sound.
3. Monitor Performance: The unit features a built-in performance meter (gauge) that shows the fence condition: green for normal, yellow for marginal, and red for a fault or poor connection. Regularly check this gauge to ensure optimal fence performance.
4. Turn Off: To turn off the fencer, push the switch to the 'OFF' position.

Maintenance

• Battery Replacement: The internal 6-volt rechargeable battery may need replacement after several years of use. The unit is designed for easy battery access and replacement. Replacement batteries are typically available from authorized dealers or online retailers.
• Solar Panel Cleaning: Periodically clean the solar panel surface with a soft, damp cloth to remove dust, dirt, or debris that may obstruct sunlight and reduce charging efficiency.
• Inspect for Pests: Regularly check the fencer unit, especially under the solar panel cover, for insect nests (e.g., wasps). These can interfere with the unit's operation and may require careful removal.
• Check Connections: Ensure all ground and fence wire connections remain tight and free from corrosion. Loose connections can reduce the effectiveness of the electric shock.
• Monitor Fence Line: Keep the fence line clear of vegetation, especially tall weeds or brush, which can ground out the fence and reduce its shock intensity.

Troubleshooting

• No Shock or Weak Shock:
  • Check Grounding: A strong ground connection is crucial. Ensure the ground rod is driven deep into moist soil and connections are secure. Consider adding more ground rods if the soil is dry.
  • Inspect Fence Line: Look for vegetation touching the fence wire, broken insulators, or damaged wires that could be causing a short circuit.
  • Battery Charge: Ensure the solar panel is receiving adequate sunlight. If the battery is old, it may need to be replaced.
  • Fencer Unit: Verify the on/off switch is in the 'ON' position and listen for the regular clicking sound. Check the performance meter for a 'Normal' (green) reading.
• Fencer Not Clicking:
  • Confirm the unit is turned on.
  • Check battery charge. If the battery is completely drained, it may not produce a click. Allow several days of direct sunlight for recharging.
  • Inspect internal connections if comfortable doing so, or consult a professional.

Specifications

Warranty and Support

Specific warranty details for the Parmak DF-SP-LI Electric Fencer are not provided in the available product information. Please refer to the product packaging or contact Parmak directly for detailed warranty terms and conditions.

For technical support or further assistance, please contact Parmak customer service through their official website or the contact information provided with your product purchase.