BioAdvanced 700280B

BioAdvanced Complete Insect Killer Ready-to-Spray Instruction Manual

Model: 700280B

Product Overview

The BioAdvanced Complete Insect Killer for Soil and Turf is a ready-to-spray solution designed to control over 500 types of surface and soil insects. This 32-ounce bottle provides a convenient hose-end application for lawns and areas around the home.

Key Features:

  • Controls over 500 listed surface and soil insects.
  • Fast-acting formula kills listed pests on contact within 24 hours.
  • Provides up to 3 months of subsurface protection against soil insects.
  • Effective against grubs, ants (except Pharaoh ants), ticks, mosquitoes, and more.
  • Treats up to 5,334 square feet.
BioAdvanced Complete Insect Killer product bottle

Image: The BioAdvanced Complete Insect Killer Ready-to-Spray bottle, showing the hose-end attachment.

Safety Information

Always read and follow all label directions and precautions before use. Keep out of reach of children and pets.

Active Ingredients:

  • Imidacloprid 0.72%
  • Beta-cyfluthrin 0.36%

WARNING: This product is not for sale in CA, CO, CT, MA, MD, ME, NJ, NV, NY, RI, VT, WA. Ensure local regulations permit use.

Image showing active ingredients Imidacloprid and Beta-cyfluthrin

Image: A graphic displaying the active ingredients: 0.72% Imidacloprid and 0.36% Beta-cyfluthrin.

Setup and Preparation

  1. Ensure the area to be treated is dry.
  2. Shake the bottle well before connecting to a garden hose.
  3. Turn on the water at the faucet.
  4. Bend the safety tab back and turn the nozzle to the "ON" position to begin spraying.
Image showing how to attach the hose-end sprayer to a garden hose

Image: Close-up of the hose-end sprayer attachment, ready to be connected to a garden hose.

Operating Instructions

Application Areas:

  • Lawns
  • Along building foundations
Image showing where to use the product: lawns and along building foundations

Image: A graphic indicating suitable application areas, including lawns and along building foundations.

How to Apply:

  1. Connect the sprayer to your garden hose.
  2. Turn the water on.
  3. Turn the nozzle to the "ON" position. The product will automatically mix with water.
  4. Spray evenly over the target area. For best results, apply to a dry lawn.
  5. For surface insects, apply thoroughly to ensure contact.
  6. For soil insects, water the treated area lightly after application to help the product penetrate the soil.
  7. After application, turn the nozzle to "OFF" and then turn off the water at the faucet.
  8. Disconnect the sprayer from the hose.

When to Apply:

Apply whenever unwanted insects are present. For white grubs, apply between May and July for optimal control. Refer to the product label for specific timing for other pests.

Image showing a cross-section of grass and soil with roots, illustrating subsurface protection

Image: A diagram showing grass and soil, highlighting the subsurface protection provided by the product.

Image showing various surface insects like ants, fleas, and ticks

Image: An illustration depicting common surface insects such as ants, fleas, and ticks.

Image showing soil insects like grubs and mole crickets

Image: A diagram illustrating soil-dwelling insects, including grubs and mole crickets.

Maintenance and Storage

Store the product in its original container in a cool, dry place inaccessible to children and pets. Do not store near food or feed. Protect from freezing.

If the sprayer becomes clogged, clean it by rinsing with water.

Troubleshooting

Common Issues:

  • No Spray/Low Pressure: Ensure the hose is fully connected and the water faucet is completely open. Check for kinks in the hose. The sprayer nozzle should be in the "ON" position.
  • Leaking from Sprayer: Ensure the hose connection is tight. If the sprayer itself is leaking, inspect for damage.
  • Product Not Working: Verify that the product was applied according to instructions, including proper coverage and timing for specific pests. Ensure the product was not applied during rain or immediately before heavy rainfall, which could wash it away before it takes effect.

Video: A user-submitted video demonstrating a leaking sprayer. If your product leaks, check connections and inspect the sprayer for damage.

Specifications

FeatureDetail
Item FormSpray
Liquid Volume32 fluid ounces
Active Ingredients0.72% Imidacloprid, 0.36% Beta-cyfluthrin
Model Number700280B
UPC840216200791, 687073002805
Coverage AreaUp to 5,334 square feet

Warranty and Support

This product comes with a manufacturer's warranty. For detailed warranty information or technical support, please refer to the product packaging or contact BioAdvanced customer service.

You can find more information and contact details on the official BioAdvanced website.

BioAdvanced logo and statement about authorized sellers

Image: The BioAdvanced logo with a statement encouraging purchase from authorized sellers for quality assurance.

Additional Resources

Video: An official video from SBM Life Science (BioAdvanced's manufacturer) providing an overview of the BioAdvanced Complete Insect Killer for Soil and Turf.

For further details and a complete list of insects controlled, please refer to the official product label or the Instructions for Use (IFU) document available from the manufacturer.

Download Instructions for Use (PDF)

© 2024 BioAdvanced. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.