Anco 31-18
Anco 31-18 Series Wiper Blade User Manual
Model: 31-18 | Brand: Anco
Product Overview
The Anco 31-18 Series Wiper Blade is designed for efficient and clear windshield wiping. It features the KwikConnect adapter system for straightforward installation and a patented DuraKlear rubber formula engineered to resist environmental factors such as ozone, UV rays, air pollution, and road grime. This blade technology aims to provide consistent performance and durability.
Figure 1: Anco 31-18 Series Wiper Blade.
What's in the Box
Each package of the Anco 31-18 Series Wiper Blade contains the following:
- One (1) Anco 31-18 Series Wiper Blade
Figure 2: Anco 31-18 Series Wiper Blade in its retail packaging.
Setup and Installation
The Anco 31-18 Series Wiper Blade features the KwikConnect adapter system for quick and easy installation. The snap-in, snap-out design allows for installation in seconds.
- Lift the wiper arm away from the windshield until it locks into place.
- Locate the release tab or button on the existing wiper blade's adapter. Press or lift the tab and slide the old blade off the wiper arm hook.
- Align the KwikConnect adapter of the new Anco wiper blade with the hook on the wiper arm.
- Slide the new blade onto the hook until it clicks securely into place. Ensure it is firmly attached.
- Gently lower the wiper arm back onto the windshield.
- Repeat the process for any other wiper blades requiring replacement.
- Test the new wiper blades by activating your vehicle's windshield washer and wipers to ensure proper function and a clear wipe.
Operating Instructions
Once installed, the Anco 31-18 Series Wiper Blade operates in conjunction with your vehicle's existing wiper system. Activate your vehicle's windshield wipers as you normally would to clear rain, snow, or debris from the windshield.
- Ensure the windshield is wet before operating wipers to prevent damage to the blade or windshield.
- Use windshield washer fluid for optimal cleaning when the windshield is dry or has stubborn grime.
Maintenance
Regular maintenance helps prolong the life and effectiveness of your wiper blades:
- Cleaning: Periodically clean the rubber blade element with a soft cloth or paper towel dampened with windshield washer fluid or mild soap and water. This removes dirt, oil, and road film that can cause streaking.
- Inspection: Inspect the blade for cracks, tears, or hardened rubber. The DuraKlear rubber formula is designed to resist ozone and UV rays, but extreme conditions can still cause wear.
- Winter Care: In freezing conditions, lift wiper arms off the windshield to prevent blades from freezing to the glass. Do not use wipers to clear heavy ice or snow; use an ice scraper.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Streaking | Dirty blade, worn rubber, or windshield contamination. | Clean the blade with a damp cloth. If streaking persists, the blade may be worn and require replacement. Clean windshield thoroughly. |
| Chattering or Skipping | Blade not making full contact, bent wiper arm, or dry windshield. | Ensure the blade is properly installed. Check wiper arm for bends. Always use washer fluid on a dry windshield. |
| Noise (Squeaking/Screeching) | Dry windshield, dirty blade, or improper blade angle. | Ensure windshield is adequately wet. Clean the blade. Check if the wiper arm is bent, causing an incorrect blade angle. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Anco |
| Model Number | 31-18 |
| Item Length | 18 Inches |
| Mounting Type | Pinch Tab |
| Vehicle Service Type | Car |
| Automotive Fit Type | Vehicle Specific Fit |
| Material | DuraKlear Rubber |
| Item Weight | 3.2 ounces |
| Country of Origin | USA |
Warranty Information
Specific warranty details for the Anco 31-18 Series Wiper Blade are not provided in this manual. Please refer to the product packaging or contact Anco customer support for comprehensive warranty information.
Support
For further assistance, technical support, or inquiries regarding the Anco 31-18 Series Wiper Blade, please visit the official Anco website or consult your product retailer. Contact information may also be available on the product packaging.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.