1. Product Overview
The LUND Interceptor Hood Shield is designed to provide robust protection for your truck or SUV's hood and windshield. This full-height, wrap-around shield guards against damage from bugs, rocks, mud, sand, dust, and debris, while also adding a customized aesthetic to your vehicle.
Constructed from heavy-duty, virtually indestructible polycarbonate, the Interceptor is engineered for vehicle-specific applications, ensuring a perfect fit. It is proudly made in the USA.
2. Key Features
- Full-height, wrap-around design for comprehensive protection.
- Manufactured from heavy-duty polycarbonate for durability.
- Provides extra protection against bugs, rocks, mud, sand, dust, and debris.
- Vehicle-specific application ensures a precise fit for trucks and SUVs.
- Mounts away from the hood, facilitating easy cleaning and waxing.
- Car-wash-safe design.
- Easy, no-drill installation using OEM-approved 3M tape or mechanical fasteners.
- Available in dark smoke or paintable clear finishes.
3. Installation Instructions
The LUND Interceptor Hood Shield features a straightforward, no-drill installation process. The entire installation typically takes 10 minutes or less. Ensure your vehicle's hood surface is clean and dry before beginning.
- Prepare the Surface: Thoroughly clean the leading edge of your vehicle's hood where the shield will be mounted. Ensure it is free of dirt, wax, and grease. Allow the surface to dry completely.
- Position the Shield: Carefully place the Interceptor Hood Shield onto the hood's edge to determine the correct alignment. Do not remove any adhesive backing or fasteners yet.
- Apply Protective Bumpers: To prevent the shield from rubbing against the hood paint, apply the included clear rubber bumpers to the hood surface at the designated contact points. Refer to the specific installation diagram provided with your product for exact locations.
- Secure the Shield: Depending on your vehicle and the specific kit, the shield will be secured using either OEM-approved 3M double-sided tape or mechanical fasteners.
- For 3M Tape Installation: Peel the backing from the 3M tape strips on the shield. Carefully align the shield and press firmly along the entire length to ensure a strong bond.
- For Mechanical Fastener Installation: Align the shield with the pre-drilled holes (if applicable) or mounting points on your hood. Secure the shield using the provided mechanical fasteners according to the detailed instructions in your kit.
- Final Check: Once installed, ensure the shield is securely attached and properly aligned. The shield should mount slightly away from the hood to allow for cleaning.
Image 1: The LUND Interceptor Hood Shield (Model 18023) installed on the front of a vehicle, demonstrating its protective coverage and aesthetic integration. The dark smoke finish is visible, highlighting the shield's wrap-around design that extends over the hood's leading edge.
4. Operation and Maintenance
The Interceptor Hood Shield is designed for minimal maintenance and maximum durability.
- Cleaning: The shield is car-wash-safe, meaning it can remain on your vehicle during automated car washes. For manual cleaning, use mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate material.
- Waxing: The design allows the shield to mount away from the hood, providing space to easily clean and wax the underlying hood surface without removing the shield.
- Damage Resistance: The heavy-duty polycarbonate construction makes the shield highly resistant to impacts and general wear and tear.
5. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 18023 |
| Brand | LUND |
| Material | Heavy-duty Polycarbonate |
| Product Dimensions | 187.33 x 26.67 x 15.24 cm (73.75 x 10.5 x 6 inches) |
| Item Weight | 2.11 kg (4.65 lbs) |
| Installation Type | No-drill (3M tape or mechanical fasteners) |
| Position | Front (Hood) |
| Manufacturer | Lund |
| Date First Available | August 15, 2012 |
6. Troubleshooting
If you encounter any issues with your LUND Interceptor Hood Shield, please review the installation instructions to ensure all steps were followed correctly. Common issues are often related to improper surface preparation or incorrect alignment during installation.
- Shield not adhering properly: Ensure the hood surface was thoroughly cleaned and free of wax/grease before applying 3M tape. Temperature can also affect adhesive performance; install in moderate temperatures if possible.
- Vibration or noise: Verify all fasteners are tight (if applicable) and that the protective rubber bumpers are correctly placed to prevent direct contact between the shield and the hood.
For persistent issues, refer to the customer support section for contact information.
7. Warranty Information
The LUND Interceptor Hood Shield is backed by a Limited Lifetime Warranty. This warranty protects against any defects in material or workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the warranty documentation included with your product or visit the official LUND website.
8. Customer Support
For further assistance, technical support, or warranty claims, please contact LUND customer service. Contact information can typically be found on the product packaging or the official LUND website.
Online Resources: Visit the official LUND website for FAQs, additional product information, and support resources.