Jura-Capresso Impressa E8 Super-Automatic Espresso Machine

1. Introduction

Welcome to the user manual for your Jura-Capresso Impressa E8 Super-Automatic Espresso Machine. This machine is designed to provide a convenient and high-quality coffee experience, brewing superb espressos, cappuccinos, lattes, and long crema coffees with ease. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read it thoroughly before first use and keep it for future reference.

2. Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the appliance.

• Electrical Safety: Ensure the voltage specified on the rating plate matches your mains voltage. Do not immerse the machine, cord, or plug in water or other liquids. Do not operate with a damaged cord or plug.
• Heat and Steam: Be cautious of hot surfaces and steam, especially from the coffee spouts and frother. Keep hands and face clear during operation.
• Child Safety: This appliance is not intended for use by children. Keep the machine and its cord out of reach of children.
• Maintenance: Always unplug the machine before cleaning or performing maintenance. Do not attempt to repair the machine yourself; contact qualified service personnel.
• Water Tank: Only fill the water tank with fresh, cold water. Do not use carbonated water or other liquids.

3. Product Overview

Familiarize yourself with the main components of your Impressa E8 machine.

Figure 3.1: Front view of the Impressa E8, showing the control panel, coffee spouts, and drip tray. The machine is black with a silver metallic middle section.

Figure 3.2: Angled view highlighting the bean container located on the top of the machine, along with the water tank on the side.

Figure 3.3: Side angled view of the Impressa E8, showcasing the Dual Frother Plus on the right side.

Key Components:

• Control Panel: Features an 8-digit LED display and illuminated chrome-plated control dial for easy navigation.
• Water Tank: 64-ounce (approx. 1.9 liters) removable water container with integrated Clearyl water filtration system.
• Bean Container: 8-ounce capacity for whole coffee beans.
• Grinder: Integrated professional solid-steel conical burr grinder with 6 fineness settings.
• Coffee Spouts: Height-adjustable dual coffee spouts.
• Dual Frother Plus: Provides continuous steam output for milk frothing and hot water dispensing.
• Drip Tray & Grounds Container: Removable for easy cleaning.

4. Setup

1. Unpacking: Carefully remove the machine from its packaging. Retain packaging for future transport or storage.
2. Placement: Place the machine on a stable, level surface away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
3. Initial Cleaning: Before first use, clean the water tank, drip tray, and grounds container with warm water and mild detergent. Rinse thoroughly.
4. Water Tank Preparation: Fill the 64-ounce removable water tank with fresh, cold water. If using the Clearyl water filter, install it according to the filter instructions before filling the tank.
5. Bean Container: Open the lid of the bean container and fill it with fresh whole coffee beans. Do not use ground coffee in the bean container.
6. Power Connection: Plug the power cord into a grounded electrical outlet.
7. First Use & Priming: Follow the on-screen instructions on the LED display for the initial setup process, which includes priming the system. This ensures water flows through all internal components.
8. Water Hardness Setting: The machine features a five-level water hardness selector. Use the included water hardness indicator strip to determine your local water hardness and set the machine accordingly for optimal performance and descaling reminders.

5. Operating Instructions

5.1 Making Coffee/Espresso

1. Ensure the machine is on and "ready" is displayed.
2. Place one or two cups under the height-adjustable coffee spouts.
3. Select Coffee Strength: Press the 1-cup button once for mild, twice for regular, or three times for strong coffee. The machine grinds from 5 to 15 grams of coffee.
4. Select Cup Size: Turn the rotary dial to select the desired cup size from 1 to 8 ounces. The 2-cup button will produce twice the selected amount.
5. The machine will automatically grind the beans, perform a two-step pre-infusion cycle for maximum flavor extraction, and then brew your coffee.
6. Using Pre-Ground Coffee: For decaf or flavored coffee, use the separate funnel for pre-ground coffee. Add one scoop of pre-ground coffee to the funnel before selecting your brew.

5.2 Frothing Milk (Latte/Cappuccino)

1. Ensure the machine is heated and "steam ready" is displayed.
2. Position a pitcher with cold milk under the Dual Frother Plus.
3. The frother offers two settings: one for latte (steaming milk) and one for cappuccino (steaming and frothing milk). Adjust the frother nozzle to the desired setting.
4. Activate the steam function using the control panel. Carefully steam or froth the milk to your desired consistency.
5. After frothing, clean the frother immediately by dispensing a small amount of steam into an empty cup to clear any milk residue.

5.3 Hot Water Dispensing

The frother can also dispense hot water for Cafe Americano or tea.

1. Place a cup under the frother.
2. Select the hot water function from the control panel. The hot water function is programmable from 1 to 16 ounces.
3. Dispense the desired amount of hot water.

5.4 Programming Functions

The Impressa E8 offers various programmable settings via its 8-step programming dial.

• Auto-Off: Set the machine to automatically turn off after a period of inactivity, from one half-hour to nine hours in one-hour increments.
• Language: Select from seven available languages for the LED display.
• Aroma Settings: Choose between Standard and Robust aroma settings.
• Rinse: Initiate a rinse cycle.
• Consult the LED display and control dial for navigating these settings.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your espresso machine.

6.1 Daily Cleaning

• Drip Tray and Grounds Container: Empty and rinse the drip tray and coffee grounds container daily. The machine will prompt you when the grounds container needs emptying.
• Coffee Spouts: Wipe the coffee spouts with a damp cloth.
• Frother: After each use, clean the Dual Frother Plus by dispensing steam to clear milk residue. Periodically disassemble and clean the frother components with warm soapy water.

6.2 Automatic Cleaning Cycles

The Impressa E8 features automatic cleaning cycles for various functions. The LED display will guide you when a cleaning cycle is required.

• Rinse Cycle: The machine performs an automatic hot-water rinse cycle to clean and pre-heat vital brewing parts.
• Cleaning Program: Use Jura cleaning tablets as instructed by the machine's display to perform a thorough cleaning of the brewing unit.

6.3 Clearyl Water Filter System

The Clearyl water-care system removes chlorine, lead, aluminum, and copper for better tasting coffee and helps prevent limescale buildup. Replace the filter cartridge as indicated by the machine's display or approximately every two months, depending on water hardness and usage.

6.4 Descaling

Although the Clearyl filter reduces the need for frequent descaling, the machine may still prompt for a descaling cycle based on water hardness and usage. Follow the on-screen instructions and use a descaling agent recommended by Capresso/Jura.

Note: A common issue leading to weak coffee or grounds spilling into the drip tray can be a clogged filter disc within the brewing unit. This disc, located behind the brown plastic flap inside the opening where the drip tray sits, can be gently wiped clean with a damp paper towel to improve coffee flow and quality.

7. Troubleshooting

This section addresses common issues you might encounter with your Impressa E8.

If the problem persists after attempting these solutions, please contact customer support.

8. Specifications

9. Warranty and Support

The Jura-Capresso Impressa E8 Super-Automatic Espresso Machine comes with a one-year limited warranty for household use. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or further inquiries, please contact Capresso customer support. Refer to the product packaging or the manufacturer's official website for the most current contact information.

Note: Using non-approved parts or attempting unauthorized repairs may void your warranty.