Introduction
Thank you for choosing the Quay Sailing Ship Woodcraft Construction Kit. This kit provides an engaging and educational experience, allowing you to assemble a detailed wooden model of a sailing ship. All components are crafted from FSC certified wood, ensuring responsible sourcing from well-managed forests. This manual provides essential information for assembly, care, and safe use of your model.
Image: The FSC logo, signifying that the wood used in this kit originates from responsibly managed forests.
Safety Information
WARNING: NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OLD.
This product contains small parts which may pose a choking hazard. Adult supervision is required during assembly and when the model is handled by younger individuals. Please ensure all packaging materials are disposed of properly.
Image: The reverse side of the product packaging, displaying important safety warnings regarding small parts and age recommendations.
Package Contents
Before beginning assembly, please verify that all components listed below are present in your kit:
- 4 Pre-Cut Wood Sheets (containing all model pieces)
- Instruction Sheet (this manual)
- Sandpaper
If any parts are missing or damaged, please contact Quay customer support.
Image: The front of the product box, illustrating the completed sailing ship model and kit branding.
Setup and Assembly
The Quay Sailing Ship Woodcraft Construction Kit is designed for straightforward assembly using a press-out and slot-together method. No glue is required for basic construction.
- Preparation: Carefully remove the pre-cut wood sheets from the packaging. Identify the individual pieces.
- Piece Identification: Each piece is numbered. Follow the numbering system provided on the wood sheets and in the detailed online guide to identify the correct order of assembly.
- Pressing Out Pieces: Gently press out each piece from its wooden sheet. If a piece is difficult to remove, use the provided sandpaper or a small craft knife (with adult supervision) to carefully loosen it.
- Assembly: Slot the corresponding numbered pieces together. Ensure a snug fit without forcing the pieces, as this may cause damage. Refer to the online step-by-step guide for visual assistance and detailed instructions.
- Finishing (Optional): Once assembled, the model can be painted or varnished to enhance its appearance. Ensure any paints or varnishes used are suitable for wood and applied in a well-ventilated area.
For a comprehensive visual guide, please visit the official online step-by-step instructions: http://quay.info/ADG
Image: Various pre-cut wooden sheets containing the model components, alongside a partially constructed sailing ship, illustrating the assembly process.
Operating (Display and Handling)
The Quay Sailing Ship Woodcraft Construction Kit is designed as a display model. While sturdy, it is not intended for rough play.
- Display: Place your completed model on a stable, flat surface away from direct sunlight, excessive heat, or humidity to preserve the wood.
- Handling: When moving the model, support it from the base to prevent stress on delicate parts like masts and rigging. Avoid dropping or applying excessive pressure.
Image: The fully assembled Quay Sailing Ship model, showcasing its intricate details and design.
Maintenance
Proper care will ensure the longevity and appearance of your wooden sailing ship model.
- Cleaning: Dust the model regularly with a soft, dry cloth or a soft-bristled brush. Avoid using abrasive cleaners or excessive moisture, which can damage the wood.
- Storage: If storing the model, ensure it is placed in a dry environment, protected from dust and physical damage.
Troubleshooting
Most issues with woodcraft kits are related to assembly. Here are some common points:
- Pieces Not Fitting: Ensure you are using the correct numbered pieces for each slot. If a piece is slightly tight, use the provided sandpaper to gently smooth the edges until it fits. Do not force pieces.
- Broken Pieces: If a piece breaks during removal or assembly, small amounts of wood glue can be used to repair it. Allow sufficient drying time. For significantly damaged or missing pieces, please contact customer support.
- Model Instability: Double-check all connections to ensure pieces are fully slotted into place. Ensure the base is correctly assembled and stable.
Specifications
| Model Name | Sailing Ship QUAY Woodcraft Construction Kit |
| Model Number | P049 |
| Brand | Quay |
| Material | FSC Certified Wood |
| Completed Dimensions (Approx.) | H29cm x L44cm x W15cm (11.4 x 17.3 x 5.9 inches) |
| Recommended Age | 9 years and up |
| Included Components | 4 Pre-Cut Wood Sheets, Instruction Sheet, Sandpaper |
Warranty and Support
Quay products are manufactured to high standards. For any inquiries regarding your Woodcraft Construction Kit, including missing or damaged parts, please refer to the contact information below:
Distributed by:
UK Business Group Ltd
Unit 3-4, Solly Business Park
Richard Street, Kirkham
PR4 2ND United Kingdom
Email: product@ukbgroup.com
Contact/Issued by:
UK Business Group BV
Herengracht 449 A
1017BP Amsterdam
Netherlands
Email: product@ukbgroup.nl
For detailed assembly instructions and further assistance, please visit the online guide: http://quay.info/ADG