Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your BANDAI SPIRITS MSZ-006 ZETA GUNDAM Master Grade Action Figure. This model kit is the first Master Grade version of the Zeta Gundam, featuring a design by Hajime Katoki and a seamless transformation system. Please read all instructions carefully before beginning assembly.

Image: Fully assembled MSZ-006 ZETA GUNDAM Master Grade Action Figure in its mobile suit form, showcasing its detailed design and weaponry.

Safety Information

• Keep small parts away from children under 3 years of age to prevent choking hazards.
• Use appropriate tools for assembly (e.g., nippers, hobby knife) and handle them with care to avoid injury.
• Some parts may have sharp edges; exercise caution during handling and assembly.
• Do not apply excessive force during assembly, as this may damage parts.
• Dispose of plastic runners and waste materials responsibly.

Parts List

Before starting assembly, verify that all components are present. The kit includes:

• Multiple plastic runners (frames, armor, weapons)
• Beam Rifle
• Hyper Mega Launcher
• Beam Sabers (x2)
• Poly-caps for joints
• Decals/Stickers
• Instruction booklet (this manual)

Image: Example of plastic runners containing various parts for the model kit, ready for detachment.

Assembly Instructions

Follow the steps below to assemble your MSZ-006 ZETA GUNDAM. Refer to the diagrams in the physical instruction booklet for detailed visual guidance.

1. Preparation: Carefully cut all parts from the runners using nippers. Smooth any nubs with a hobby knife or sandpaper. Organize parts by section (e.g., head, torso, arms, legs).
2. Torso Assembly: Begin by assembling the core torso unit. Connect the front and back chest pieces, ensuring poly-caps are correctly inserted for joint articulation.
3. Head Assembly: Assemble the head unit, including the v-fin and clear visor. Attach it to the torso.
4. Arm Assembly: Assemble each arm, connecting shoulder, bicep, forearm, and hand parts. Attach the completed arms to the torso.
5. Leg Assembly: Assemble each leg, including thigh, knee, shin, and foot components. Ensure all joints are secure. Attach the legs to the waist section, then connect the waist to the torso.
6. Backpack Assembly: Assemble the backpack unit, which includes the main thrusters and wing binders. Attach it to the back of the torso.
7. Weapon Assembly: Assemble the Beam Rifle, Hyper Mega Launcher, and Beam Sabers.
8. Final Assembly: Attach all assembled sections and weapons to the main body. Apply decals or stickers as desired for added detail.

Image: A hand carefully attaching a part to a model kit, demonstrating the assembly process.

Operating Instructions

The MSZ-006 ZETA GUNDAM Master Grade model features a seamless transformation system and an optional LED stabilizer.

Transformation to Wave Rider Mode:

The Zeta Gundam can transform into its Wave Rider mode. Follow the specific steps outlined in the physical instruction booklet for this complex transformation. Key steps generally involve:

• Folding the legs and arms into designated positions.
• Adjusting the backpack and wing binders to form the rear section.
• Securing all parts to ensure a stable Wave Rider configuration.

Exercise care during transformation to avoid stressing or breaking parts. Refer to the detailed diagrams for proper alignment and locking mechanisms.

LED Stabilizer Option:

This model includes an option for an LED stabilizer. If you wish to utilize this feature, you will need to purchase a compatible LED unit separately (not included). Insert the LED unit into the designated slot in the stabilizer component as per the physical instruction booklet's diagrams. Ensure correct polarity if battery-operated.

Image: A completed Gundam model, possibly demonstrating the effect of an installed LED unit, highlighting its features.

Maintenance

To ensure the longevity and appearance of your model:

• Cleaning: Dust regularly with a soft, dry brush or microfiber cloth. For stubborn dirt, lightly dampen a cloth with water and gently wipe, then dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
• Joint Care: If joints become loose over time, a thin layer of clear topcoat or hobby cement (applied carefully to the male peg, allowed to dry slightly, then reassembled) can help tighten them.

Troubleshooting

Specifications

Warranty and Support

For product support, missing parts, or inquiries, please contact BANDAI SPIRITS customer service. While specific warranty details are not provided in this manual, standard consumer rights and return policies apply. Please retain your proof of purchase.

For more information, you may visit the official BANDAI SPIRITS website or contact the retailer where the product was purchased.

Note: This product is intended for ages 15 and up.