BANDAI SPIRITS Master Gundam MG Model Kit Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the assembly and care of your BANDAI SPIRITS Master Grade (MG) Master Gundam model kit. The Master Gundam, from the G Gundam series, is designed with advanced articulation to perform various martial arts poses. This kit is suitable for individuals aged 15 and above.

Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

2. Safety Information

• Small Parts Warning: This kit contains small parts that may pose a choking hazard. Keep out of reach of small children.
• Sharp Edges: Some parts may have sharp edges or points. Handle with care during assembly.
• Tools: A hobby nipper (sold separately) is required for safely removing parts from the runners. Use appropriate safety precautions when using tools.
• Ventilation: If using paints or adhesives (not required for basic assembly), ensure adequate ventilation.

3. Package Contents

Verify that all components listed below are present in your kit before starting assembly:

• Plastic runners (frames containing model parts)
• Instruction booklet
• Decal sheet (stickers/dry transfers)
• Multiple sets of expressive hand parts
• Darkness Finger effect parts
• Master cloth parts
• Special internal frame components
• Figure of Master Asia

Figure 3.1: The product box for the Master Gundam MG Model Kit, showing the assembled model and Master Asia.

4. Assembly Instructions

Follow the numbered steps in the included instruction booklet for detailed assembly. The following general guidelines apply:

1. Part Removal: Use a hobby nipper to carefully remove parts from the plastic runners. Cut slightly away from the part, then trim any remaining nubs with the nipper or a hobby knife for a clean finish.
2. No Glue Required: This kit features snap-fit assembly, meaning no glue is required. Parts are designed to fit together securely.
3. Colored Plastic: The kit uses pre-colored plastic, minimizing the need for paint to replicate the appearance. However, painting can enhance detail if desired.
4. Internal Frame: Begin by assembling the internal frame, which provides the structural integrity and articulation for the model. This kit includes a special internal frame designed for balance and dynamic posing.
5. Armor Assembly: Attach the armor pieces to the completed internal frame according to the instructions.
6. Accessory Assembly: Assemble the various hand parts, Darkness Finger effect parts, and Master cloth parts as indicated.
7. Master Asia Figure: Assemble and paint the included Master Asia figure if desired.

Figure 4.1: Illustration of a hand carefully assembling a model kit part, demonstrating the snap-fit process.

Figure 4.2: A close-up view of model kit plastic runners, showing various parts still attached to the frame.

Figure 4.3: The fully assembled Master Gundam model kit, showcasing its dynamic poseability.

5. Features

The Master Gundam MG Model Kit offers several key features:

• Martial Arts Posing: Designed specifically to allow for a wide range of dynamic martial arts poses, reflecting its on-screen capabilities.
• Expressive Hand Parts: Includes multiple sets of interchangeable hands to convey various actions and emotions, including the iconic Darkness Finger.
• Master Cloth: Features parts to recreate the Master Cloth, a signature weapon and accessory of the Master Gundam.
• Special Internal Frame: Incorporates a unique internal frame structure that contributes to its stability and articulation.
• Master Asia Figure: A small, unpainted figure of Master Asia is included, allowing for display alongside the Gundam.

Figure 5.1: The Master Gundam model kit displayed in a dynamic action pose, highlighting its articulation.

6. Specifications

7. Maintenance

To ensure the longevity and appearance of your Master Gundam model kit:

• Cleaning: Dust regularly with a soft brush or compressed air. Avoid harsh chemicals or abrasive materials.
• Handling: Handle the model by its main body parts rather than delicate accessories or thin antennae to prevent breakage.
• Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
• Joint Care: If joints become loose over time, a thin layer of clear topcoat or a small piece of tissue paper can be applied to the ball joint to increase friction.

8. Troubleshooting

Should you encounter any issues during or after assembly, consider the following:

• Parts Not Fitting: Ensure parts are oriented correctly. Check for any remaining plastic nubs from the runners that might be obstructing the fit. Do not force parts together.
• Loose Joints: Refer to the 'Joint Care' section under Maintenance.
• Missing Parts: Carefully re-check all runners and the packaging. If a part is genuinely missing, contact the retailer or manufacturer's customer support.
• Decal Application Issues: Ensure the surface is clean and dry. Use tweezers for precise placement and a cotton swab to gently press out air bubbles.

9. Warranty and Support

This product is an officially licensed BANDAI SPIRITS item. For any concerns regarding manufacturing defects or missing components, please retain your proof of purchase and contact the retailer where the kit was purchased. For further assistance or inquiries, you may also refer to the official BANDAI SPIRITS website or their authorized distributors for customer support information.

The product box includes a Bandai Namco warning label, which serves as proof of an officially licensed product.