Westinghouse 70103 15-Foot Gold Cord Set Instruction Manual

Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of your Westinghouse 70103 15-Foot Gold Cord Set. Please read all instructions carefully before use and retain this manual for future reference.

Image: The Westinghouse 70103 15-foot gold cord set, featuring a polarized two-prong plug on one end and split, stripped, and tipped free ends on the other, ready for wiring into an electrical fixture.

Safety Information

WARNING: To reduce the risk of fire or electric shock, carefully follow these instructions. This product is intended for indoor use only. Always disconnect power at the circuit breaker before performing any wiring.

• Ensure all electrical connections are secure and comply with local electrical codes.
• Do not exceed the electrical rating of the cord set or the connected appliance.
• Inspect the cord set regularly for any signs of damage, such as frayed wires or cracked insulation. Discontinue use if damaged.
• This cord set is CSA approved and UL Listed for safety, indicating it meets applicable standards.
• California Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

Product Features

• Length: 15-foot cord set.
• Plug Type: Polarized two-prong plug for enhanced safety.
• Wire Type: 18-2 SPT-1 wire.
• Finish: Gold finish sheath.
• Ends: Split, stripped, and tipped free ends for easy wiring.
• Heat Resistance: Rated for heat resistance up to 105 degrees Celsius.
• Safety Certifications: CSA approved and UL Listed.

Setup and Installation

This cord set is designed for wiring into electrical fixtures such as lamps or small appliances. Professional installation is recommended if you are unfamiliar with electrical wiring.

1. Disconnect Power: Before beginning any wiring, ensure the power supply to the fixture is completely disconnected at the circuit breaker or fuse box.
2. Prepare Fixture: If replacing an existing cord, carefully remove the old cord from the fixture, noting the original wiring connections.
3. Identify Wires: The Westinghouse 70103 cord set features a polarized plug. This means one wire is designated as neutral and the other as hot.
   • The neutral wire typically has a ribbed texture or a marking along its insulation.
   • The hot wire is usually smooth.
   It is crucial to connect the neutral wire to the neutral terminal of your fixture (often silver-colored or marked 'N') and the hot wire to the hot terminal (often brass-colored or marked 'L').
4. Connect Wires: Insert the stripped and tipped free ends of the cord into the appropriate terminals of your fixture. Secure the connections firmly, ensuring no loose strands of wire.
5. Secure Cord: Use any strain relief mechanisms provided by your fixture to prevent tension on the wire connections.
6. Test: Once wiring is complete and all covers are secured, restore power and test the fixture.

Operating Instructions

Once properly installed and wired into your fixture, operating the cord set is straightforward:

1. Insert the polarized two-prong plug into a standard, properly grounded electrical wall outlet.
2. Ensure the connected fixture or appliance is switched to the "ON" position, if applicable.
3. To disconnect power, simply unplug the cord set from the wall outlet.

Maintenance

Regular maintenance ensures the longevity and safe operation of your cord set.

• Inspection: Periodically inspect the entire length of the cord, the plug, and the wired connections for any signs of wear, cuts, cracks, or discoloration.
• Cleaning: If necessary, gently wipe the cord with a dry, soft cloth. Do not use liquid cleaners or immerse the cord in water.
• Storage: When not in use, store the cord set in a dry, cool place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly coiling the cord.

Troubleshooting

If your fixture or appliance connected to the cord set is not receiving power, consider the following:

• No Power to Fixture:
  • Check if the wall outlet is functional by plugging in another known working device.
  • Ensure the cord set's plug is fully inserted into the wall outlet.
  • Verify that the circuit breaker for the outlet has not tripped.
  • Inspect the wiring connections within your fixture to ensure they are secure and correctly polarized (neutral to neutral, hot to hot).
  • Examine the cord for any visible damage. If damaged, discontinue use and replace.
• Intermittent Power: This could indicate a loose connection. Disconnect power and re-check all wiring points.

If issues persist after troubleshooting, consult a qualified electrician.

Specifications

Warranty and Support

This Westinghouse cord set is covered by the manufacturer's standard warranty, as labeled on the product packaging or included documentation. For specific warranty details or technical support, please refer to the official Westinghouse website or contact their customer service department.

Contact Information:

• Website: www.westinghouselighting.com (Note: This is a general Westinghouse Lighting website, actual support link may vary.)
• Refer to product packaging for specific customer service contact details.