American Standard Hampton Two-Lever Widespread Lavatory Faucet Instruction Manual

Introduction and Overview

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your American Standard Hampton Two-Lever Widespread Lavatory Faucet. Designed for durability and aesthetic appeal, this faucet features a polished chrome finish and robust construction to ensure long-lasting performance in your bathroom.

Key features include ADA compliance, a solid brass crescent spout, and a metal pop-up drain. The ceramic disc valve technology ensures drip-free operation and extends the life of the faucet. Coordinating bath/shower and bidet faucets are also available to complete your bathroom ensemble.

Product Features

• Ceramic Disc Valves: Extend the life of smooth handle operation and ensure leak-free performance.
• Metal Pop-Up Drain: Included for convenient basin drainage.
• Metal Lever Handles: Provide precise control over water flow and temperature.
• Coordinating Fixtures: Matching shower valves and tub fillers are available separately.
• Permanent Finish: Resists discoloration and scratches, maintaining its appearance over time.
• Durable Construction: Made with cast brass, meeting safe drinking water requirements.

Setup and Installation

Professional installation is recommended for optimal performance and to ensure compliance with local plumbing codes. Before beginning installation, ensure the main water supply to the area is turned off.

Required Tools (Not Included):

• Adjustable wrench
• Phillips head screwdriver
• Plumber's putty or silicone sealant (optional, but recommended for drain seal)
• Thread seal tape

Installation Steps:

1. Prepare the Sink: Ensure the mounting surface is clean and dry. The faucet is designed for a 3-hole widespread installation.
2. Install Faucet Body: Insert the faucet spout and handle assemblies into the corresponding holes on the sink or countertop. Secure them from underneath with the provided washers and nuts.
3. Connect Water Lines: Attach the hot and cold water supply lines to the appropriate inlets on the faucet body. Use thread seal tape on all threaded connections to prevent leaks.
4. Install Pop-Up Drain: The metal pop-up drain features a cable-operated mechanism for easy installation and adjustment. Insert the drain body into the sink's drain hole. While the instructions suggest using only the included foam washer, applying a thin bead of plumber's putty or silicone sealant around the flange before insertion is recommended for a more secure, leak-free seal. Connect the cable mechanism to the faucet's lift rod.
5. Flush Lines: Before attaching the aerator, turn on the water supply and flush the lines for a few minutes to clear any debris from the plumbing and faucet castings. This prevents clogging of the aerator.
6. Attach Aerator: Once flushing is complete, attach the aerator to the spout.

Operating Instructions

Your American Standard Hampton faucet is designed for intuitive operation.

• Water Flow and Temperature Control: The two lever handles control the hot and cold water independently. Turn the left handle for hot water and the right handle for cold water. Rotate the handles forward to increase water flow and backward to decrease or shut off.
• Pop-Up Drain Operation: The pop-up drain is operated by a lift rod located at the back of the faucet spout. Pull the rod up to close the drain and push it down to open the drain, allowing water to flow out of the basin.

Maintenance and Care

Proper care will help maintain the finish and functionality of your American Standard Hampton faucet for years to come.

• Cleaning the Finish: Clean the faucet regularly with a soft cloth and warm, soapy water. Rinse thoroughly and dry with a soft cloth to prevent water spots. Do NOT use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Aerator Maintenance: If water flow becomes restricted, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris from the screen, and rinse it under running water. Reattach the aerator securely.
• Ceramic Disc Valves: The ceramic disc valves are designed for long-term, drip-free performance and typically require no maintenance.

Troubleshooting

If you encounter issues with your faucet, refer to the following common problems and solutions:

Specifications

Warranty and Support

American Standard offers a Limited Lifetime Warranty on the functionality and finish of this product. This warranty covers defects in material and workmanship under normal use and service.

For warranty claims, technical assistance, or to order replacement parts, please contact American Standard customer support. Keep your proof of purchase and product model number (7881732.002) readily available when contacting support.

For the most current contact information and detailed warranty terms, please visit the official American Standard website or refer to the documentation included with your purchase.