Braun Braun AS 200
Braun AS 200 Hot Air Styler User Manual
Model: Braun AS 200
1. Product Overview
The Braun AS 200 Hot Air Styler is designed to efficiently dry and style your hair simultaneously. This versatile tool allows for easy creation of various hairstyles, from smooth looks to curls and waves, thanks to its integrated brush and airflow system.
Key features include:
- 200 Watt Power: Provides effective drying and styling performance.
- Two Airflow and Temperature Settings: Allows for customized styling based on hair type and desired results.
- Integrated Round Brush (18mm): Ideal for creating curls, waves, or adding volume, especially for shorter hair.
- Gentle on Hair and Scalp: Designed to minimize heat damage while styling.

Figure 1: Main view of the Braun AS 200 Hot Air Styler, showcasing its sleek black design and integrated brush.
2. Safety Instructions
Please read all safety warnings and instructions carefully before using this appliance to prevent injury or damage. Keep this manual for future reference.
- Water and Moisture: Do not use this appliance near bathtubs, showers, basins, or other vessels containing water. Never immerse the appliance in water or any other liquid.
- Power Supply: Ensure the voltage indicated on the appliance corresponds to your local mains voltage before connecting.
- Unplugging: Always unplug the appliance immediately after use and before cleaning. Do not pull the cord to unplug; grasp the plug itself.
- Children: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Damage: Do not operate the appliance if the cord or plug is damaged, or if it has malfunctioned or been dropped or damaged in any manner. Contact an authorized service center for examination and repair.
- Heat: The appliance becomes hot during use. Avoid direct contact with the hot surfaces, especially the brush and air outlet. Allow the appliance to cool down completely before storing.
- Ventilation: Do not block the air openings or place the appliance on a soft surface, such as a bed or couch, where the air openings may be blocked.
- Attachments: Use only attachments supplied or recommended by the manufacturer.
3. Setup
Before first use, follow these steps:
- Unpack: Carefully remove the Braun AS 200 Hot Air Styler and all accessories from its packaging.
- Inspect: Check the appliance for any visible damage. If the appliance or cord appears damaged, do not use it and contact customer support.
- Power Connection: Ensure your power outlet matches the voltage requirements of the appliance (typically indicated on the product label or packaging).
4. Operating Instructions
Follow these steps for effective styling:
- Prepare Hair: For best results, use the hot air styler on towel-dried or slightly damp hair. Detangle your hair thoroughly before styling.
- Plug In: Insert the power plug into a suitable electrical outlet.
- Select Setting: The Braun AS 200 features two airflow and temperature settings. Use the switch on the handle to select your desired setting:
- Setting I: Lower heat/airflow for gentle drying and styling, suitable for fine or delicate hair.
- Setting II: Higher heat/airflow for faster drying and more intense styling, suitable for thicker or damp hair.
- Section Hair: Divide your hair into manageable sections using clips. This ensures even drying and styling.
- Styling Technique:
- For volume and lift: Place the brush close to the roots and lift upwards while directing the airflow.
- For curls and waves: Wrap a section of hair around the 18mm round brush, hold for a few seconds to allow heat to set the curl, then gently unroll.
- For straightening/smoothing: Pull the brush slowly through sections of hair from root to tip, maintaining tension.
- Cool Down (Optional): While there isn't a dedicated cool shot button, you can switch to the lower setting (I) or turn off the device briefly to help set the style with cooler air.
- Finish: Once styling is complete, switch the appliance off and unplug it from the power outlet.

Figure 2: Front view of the styler, showing the control switch for airflow and temperature settings.

Figure 3: Close-up of the integrated 18mm round brush, designed for versatile styling.
5. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your appliance.
- Unplug and Cool: Always unplug the hot air styler from the power outlet and allow it to cool down completely before cleaning.
- Wipe Exterior: Wipe the exterior surface of the appliance with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Clean Brush: Regularly remove any hair or lint that has accumulated in the brush bristles. You can use a comb or your fingers to gently pull out trapped hair.
- Air Inlet Filter: Check the air inlet filter (usually at the back of the appliance) for dust and debris. If accessible, gently clean it with a soft brush or cloth. Do not block the air inlet during use.
- Storage: Store the appliance in a dry place, away from moisture and direct sunlight, once it has completely cooled. Do not wrap the power cord tightly around the appliance, as this can damage the cord.
6. Troubleshooting
If you encounter any issues with your Braun AS 200 Hot Air Styler, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in correctly; no power at outlet; appliance malfunction. | Ensure the plug is fully inserted into a working electrical outlet. Test the outlet with another device. If still not working, contact customer support. |
| No heat or insufficient heat. | Incorrect setting selected; air inlet/outlet blocked. | Check that the temperature/airflow switch is set to 'I' or 'II'. Ensure air inlet and outlet are clear of dust and hair. |
| Hair gets tangled in the brush. | Too much hair sectioned; improper technique. | Work with smaller sections of hair. Ensure hair is detangled before styling. Gently unroll hair from the brush. |
| Appliance suddenly stops during use. | Overheating protection activated. | Unplug the appliance and let it cool down for at least 10-15 minutes. Check for any blockages in the air inlets/outlets. Re-plug and try again. |
7. Specifications
Detailed technical specifications for the Braun AS 200 Hot Air Styler:
- Model Number: Braun AS 200
- Power: 200 Watts
- Settings: 2 Airflow and Temperature Settings
- Brush Diameter: 18 mm (Round Brush)
- Dimensions (L x W x H): Approximately 9.1 x 32.4 x 4.6 cm (3.58 x 12.76 x 1.81 inches)
- Weight: 265 Grams (0.58 lbs)
- Power Source: Corded Electric
- Color: Black
- Material: Plastic (body), bristles (material not specified, assumed standard for hair brushes)
8. Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official Braun website. Keep your proof of purchase for any warranty claims.
If you require further assistance, have questions about your product, or need to arrange a repair, please contact Braun customer support through their official website or the contact details provided in your product documentation.
You can typically find support information at: www.braun.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.