ritter E 18 Electric Universal Slicer

1. Introduction

Thank you for choosing the ritter E 18 electric universal slicer. This appliance is designed for efficient and precise slicing of various food items in your kitchen. Manufactured in Germany, it combines quality craftsmanship with user-friendly features, specifically catering to left-handed users.

Please read this instruction manual carefully before first use to ensure safe operation and optimal performance of your appliance. Keep this manual for future reference.

Figure 1: The ritter E 18 electric slicer in a kitchen environment, highlighting its German manufacturing and brand heritage.

2. Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the appliance:

• Before connecting, check that the mains voltage matches the voltage specified on the rating plate.
• Do not operate the appliance with a damaged power cord or plug.
• Keep hands and utensils away from the moving blade during operation.
• Always use the food holder to protect your fingers when slicing.
• Unplug the appliance from the power outlet before cleaning or when not in use.
• This appliance is not intended for use by children or persons with reduced physical, sensory, or mental capabilities unless supervised.
• The appliance has a maximum operating time of 5 minutes. Allow it to cool down before further use.

Figure 2: CE marking, indicating compliance with relevant European health, safety, and environmental protection legislation.

3. Setup and Assembly

3.1 Unpacking

1. Carefully remove the slicer and all accessories from the packaging.
2. Check for any damage during transit. If damaged, do not operate and contact your retailer.
3. Remove all packaging materials, including protective films and transport locks.

3.2 Placement

Place the slicer on a stable, flat, and non-slip surface. Ensure there is sufficient space around the appliance for safe operation and ventilation.

3.3 Initial Cleaning

Before first use, clean all parts that will come into contact with food. Refer to the 'Maintenance and Cleaning' section for detailed instructions.

4. Operating Instructions

4.1 Controls Overview

• Slice Thickness Adjustment Dial: Located on the side, this dial allows continuous adjustment of slice thickness from very thin to approximately 14 mm.
• Safety Switch: The appliance features a push-button safety switch for both momentary and continuous operation.
• Removable Carriage: The food carriage has approximately 15 cm of travel and is removable for easy cleaning.
• Food Holder: Essential for safely holding food during slicing and protecting your hands.
• Crumb Tray: Collects crumbs and small pieces, ensuring a cleaner workspace.

Figure 3: Key features of the ritter E 18 slicer, including the ECO motor and left-handed slicing design.

4.2 Slicing Procedure

1. Ensure the appliance is unplugged before placing food.
2. Adjust the slice thickness using the dial to your desired setting (0-14 mm).
3. Place the food item firmly on the removable carriage. For safety, always use the food holder to secure the food.
4. Plug the appliance into a suitable power outlet.
5. To start slicing, press and hold the safety switch for momentary operation, or engage it for continuous operation.
6. Gently push the carriage with the food item towards the rotating serrated blade. The slicer is designed for left-handed use, meaning the food is sliced from left to right.
7. Collect the sliced food from the collection tray.
8. After slicing, release the safety switch (if in momentary mode) or disengage it (if in continuous mode) to stop the blade.
9. Unplug the appliance from the power outlet.

Figure 4: The ritter E 18 slicer in action, demonstrating its ability to slice various food items.

5. Maintenance and Cleaning

Regular cleaning ensures the longevity and hygienic operation of your slicer.

5.1 General Cleaning

1. Always unplug the appliance before cleaning.
2. Remove the food holder and crumb tray. Wash them with warm soapy water and rinse thoroughly.
3. Wipe the main body of the slicer with a damp cloth. Do not immerse the motor unit in water.
4. For stubborn food residues, use a mild detergent. Avoid abrasive cleaners or scouring pads.
5. Ensure all parts are completely dry before reassembling or storing the appliance.

5.2 Blade Removal and Cleaning

The serrated blade can be removed for thorough cleaning. Exercise extreme caution as the blade is very sharp.

1. Ensure the appliance is unplugged.
2. Locate the blade locking mechanism (refer to appliance diagram if needed).
3. Carefully unlock and remove the blade. Handle it only by the center hub.
4. Wash the blade by hand with warm soapy water. Do not wash in a dishwasher.
5. Rinse and dry the blade thoroughly.
6. Reattach the blade, ensuring it is securely locked in place before use.

Care Instructions: Hand wash only for the blade.

6. Troubleshooting

If the problem persists after attempting these solutions, please contact ritter customer support or your retailer.

7. Specifications

Figure 5: Dimensions of the ritter E 18 electric slicer.

8. Warranty and Support

ritter products are known for their high quality of materials and manufacturing, designed for durability and long-term use. While specific warranty periods may vary by region or retailer, ritter is committed to the longevity of its products.

If you encounter any issues or require repairs, ritter is dedicated to assisting its customers. For support, please contact your point of purchase or visit the official ritter website for customer service information.

For more information about ritter products and their commitment to quality, you can visit the ritter Brand Store.