Product Overview
The BLACK+DECKER Workmate Portable Workbench (WM125) is a versatile and durable tool designed for various home improvement and workshop tasks. Its robust construction and adaptable features make it an essential addition for both serious craftsmen and DIY enthusiasts.
Key features include:
- Durable steel frame and wooden vise jaws.
- Sturdy construction capable of holding up to 350 lbs.
- Compact, lightweight design that folds flat for easy storage.
- Adjustable swivel pegs for clamping irregular shapes.
- Warp-resistant jaws that can be angled for uniquely-shaped materials, offering 4-5/8" parallel clamping.
- Slip-resistant feet to prevent sliding during use.
Figure 1: The BLACK+DECKER Workmate Portable Workbench (WM125) in its unfolded, ready-to-use state.
Setup and Assembly
Assembly of the Workmate WM125 is required. Please ensure you have the following tools and take all necessary safety precautions before beginning:
- Hammer
- Flat-blade screwdriver
- Phillips-head screwdriver (recommended for bolts with Phillips pattern)
- Included nut driver
Step 1: Assemble the Leg Frames
Identify pieces L and R (the main leg frames). Secure the cross-braces (part Z) to the legs using the provided bolts and nuts. Ensure all connections are tightened securely to prevent movement during use.
Figure 2: The Workmate highlighting its sturdy steel frame and adjustable swivel pegs. Ensure all structural components are securely fastened during assembly.
Step 2: Attach the Vise Mechanism
Position the main vise mechanism (part N) and the handle assembly (part K with part L) onto the leg frames. Align the holes and insert the pins, securing them with a hammer. It is recommended to perform this step on a protected surface to avoid damage to flooring.
Figure 3: The workbench in use, demonstrating the heavy-duty steel frame and warp-resistant wooden jaws that securely hold items like a bicycle frame.
Step 3: Install the Sliding Blocks and Wooden Jaws
Insert the sliding blocks into the vise mechanism. The front block has a piece that fits into a hole, and the back block fits into part N. Then, place the wooden jaws (part X) onto the sliding blocks, ensuring the recessed areas align with the bolts. Tighten all bolts securely using the nut driver.
Figure 4: The compact and lightweight design of the Workmate, making it easy to transport and store.
Step 4: Attach Rubber Feet
Turn the workbench over and firmly press the rubber feet onto the bottom of each leg. Ensure the long side of the rubber feet is on the outside for proper stability.
Figure 5: The Workmate folds flat, demonstrating its compact storage capability.
Note on Videos:
No official "Seller" videos were available for embedding that met the specified criteria. All available videos were from "Influencer" creators.
Operating Instructions
Clamping Objects
To clamp an object, turn the handle to adjust the vise jaws. The adjustable swivel pegs can be inserted into the holes on the wooden jaws to accommodate irregularly shaped materials, providing a secure grip.
Figure 6: The Workmate's versatility is shown by securely clamping a uniquely shaped wooden carving using its adjustable jaws and pegs.
Folding for Storage
The Workmate is designed to fold flat for easy storage. Release any clamped objects, then follow the instructions in reverse order or consult the included manual for specific folding mechanisms.
Maintenance
- Regularly inspect all bolts and nuts for tightness and re-tighten as needed.
- Keep the wooden jaws clean and free of debris.
- Store the workbench in a dry environment to prevent rust on metal parts and warping of wooden components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Workbench feels wobbly after assembly. | Bolts and nuts are not fully tightened. | Ensure all bolts and nuts, especially on the leg frames and cross-braces, are securely tightened. |
| Vise jaws do not move smoothly. | Debris in the sliding mechanism or misaligned parts. | Clear any debris from the tracks. Check for proper alignment of the vise mechanism and sliding blocks. |
| Rubber feet do not stay in place. | Not pressed firmly enough or incorrect orientation. | Press the rubber feet firmly onto the legs, ensuring the long side is on the outside. |
Specifications
- Model: WM125
- Material: Steel, Wood
- Product Dimensions: 5"D x 5"W x 35"H (folded)
- Item Weight: 14.9 Pounds
- Load Capacity: 350 Pounds
- Assembly Required: Yes
- UPC: 028877364858
- Style: Portable Workbench
- Included Components: WM125 Project Center, (4) Swivel Pegs
Warranty and Support
The BLACK+DECKER Workmate Portable Workbench (WM125) comes with a 2-year warranty.
For detailed instructions, troubleshooting, or warranty claims, please refer to the official User Manual (PDF) available for download or visit the BLACK+DECKER website.