JED Pool Tools 35-718 Pool Maintenance Kit

Introduction

This manual provides instructions for the JED Pool Tools 35-718 Pool Maintenance Kit. This kit is designed for maintaining small above-ground and pop-up pools, offering essential tools for routine cleaning and water care. Please read these instructions carefully before assembly and use to ensure proper operation and longevity of the product.

Safety Information

• Always supervise children around pools and pool maintenance equipment.
• Do not use damaged equipment. Inspect all components before each use.
• When handling pool chemicals, follow the chemical manufacturer's safety guidelines. Wear appropriate protective gear.
• Ensure the Venturi vacuum is properly connected to a garden hose before use to prevent water leakage.
• Store all pool tools in a dry, shaded area away from direct sunlight and extreme temperatures.

Package Contents

The JED Pool Tools 35-718 Pool Maintenance Kit includes the following components:

• Skimmer Head with 4-ft Pole: For removing surface debris.
• Venturi Vacuum: Garden-hose powered vacuum for bottom cleaning.
• Mini Chlorine/Bromine Dispenser: For dispensing chemical tablets.
• AquaCheck Test Strips: For monitoring water balance.
• Floating Thermometer: For measuring water temperature.

Image: All components of the JED Pool Tools 35-718 Pool Maintenance Kit, including the water quality tester, chemical dispenser, water thermometer, pool vacuum cleaner, and leaf skimmer net.

Setup Instructions

1. Skimmer Head and Pole Assembly

1. Align the skimmer head with the end of the 4-ft pole.
2. Push the skimmer head onto the pole until it clicks securely into place. Ensure it is firmly attached before use.

2. Venturi Vacuum Connection

1. Attach the Venturi vacuum head to the 4-ft pole.
2. Connect a standard garden hose to the inlet on the Venturi vacuum. Ensure the connection is tight to prevent leaks.
3. Place the mesh debris bag onto the vacuum head, securing it with the attached clip or elastic band.

3. Mini Chlorine/Bromine Dispenser Preparation

1. Twist open the dispenser.
2. Insert the appropriate size and type of chlorine or bromine tablet (not included) into the dispenser.
3. Close the dispenser securely. Adjust the vents on the dispenser to control the release rate of chemicals, if applicable.

Operating Instructions

1. Using the Skimmer Head

1. Extend the 4-ft pole with the skimmer net attached.
2. Gently glide the skimmer net across the surface of the pool to collect leaves, insects, and other floating debris.
3. Periodically remove collected debris from the net.

Image: A close-up view of the blue leaf skimmer net, showing its fine mesh for collecting small debris.

2. Operating the Venturi Vacuum

1. Ensure the garden hose is connected and the debris bag is attached to the vacuum head.
2. Submerge the vacuum head into the pool.
3. Turn on the garden hose. Water flowing through the Venturi vacuum creates suction, drawing debris from the pool bottom into the mesh bag.
4. Slowly move the vacuum head across the bottom of the pool to collect settled debris.
5. When finished, turn off the garden hose and remove the vacuum from the pool. Empty and clean the debris bag.

3. Using the Mini Chlorine/Bromine Dispenser

1. After loading with tablets, place the dispenser in the pool.
2. The dispenser will float and slowly release chemicals into the water.
3. Regularly check the tablet level and refill as needed.

4. Using AquaCheck Test Strips

1. Dip a test strip into the pool water for the recommended time (usually a few seconds).
2. Remove the strip and wait for the specified time (e.g., 15-30 seconds) for colors to develop.
3. Compare the colors on the strip to the color chart provided on the test strip container to determine water chemistry levels.

5. Using the Floating Thermometer

1. Place the thermometer in the pool water.
2. Allow a few minutes for the thermometer to acclimate to the water temperature.
3. Read the temperature directly from the scale.

Image: The JED Pool Tools 35-718 Pool Maintenance Kit components, including the vacuum, skimmer, thermometer, and chemical dispenser, arranged on a deck next to a pool, with a person using a skimmer in the background.

Maintenance

1. Cleaning the Skimmer Net

• After each use, rinse the skimmer net thoroughly with a garden hose to remove all debris and residue.
• Allow the net to air dry completely before storage.

2. Cleaning the Venturi Vacuum

• After each use, detach the debris bag and empty its contents.
• Rinse the debris bag and the vacuum head with clean water.
• Ensure no debris is lodged in the vacuum's water inlet or outlet.
• Allow all components to dry before reassembly and storage.

3. Storage

• Store all kit components in a cool, dry place away from direct sunlight.
• Keep components away from harsh chemicals that could degrade materials.

Troubleshooting

Specifications

• Model Name: Pool Maintenance Kit
• Model Number: 35-718
• Brand: JED Pool Tools
• Material: Steel (pole), Plastic (heads, dispenser, thermometer)
• Product Dimensions: 13.3"L x 5"W x 19.15"H (packaged)
• Item Weight: 1.9 Pounds
• Power Source: Hand-powered (skimmer, thermometer, dispenser), Garden-hose powered (Venturi vacuum)
• Required Assembly: No (minimal assembly for pole/head attachment)

Warranty Information

Specific warranty details for the JED Pool Tools 35-718 Pool Maintenance Kit are not provided in this manual. For information regarding product warranty, please contact JED Pool Tools directly or refer to the product packaging or purchase documentation.

Customer Support

If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact JED Pool Tools customer support for further assistance.

Contact information can typically be found on the product packaging or the official JED Pool Tools website.