Tripp Lite P510-006
Tripp Lite VGA Monitor Extension Cable (HD15 M/F) 6-ft. (P510-006) User Manual
Model: P510-006
Introduction
This manual provides essential information for the proper use and care of your Tripp Lite VGA Monitor Extension Cable (HD15 M/F) 6-ft. (P510-006). This cable is designed to extend the reach of your existing VGA monitor cable, ensuring reliable video signal transmission. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your product.
Product Features
- Length: 6 feet VGA Monitor Extension Cable.
- Compatibility: Designed for monitors with resolutions up to 640x480 (VGA standard). For higher resolution monitors, please use Tripp Lite P500-006 series cables.
- Connectors: Features HD15 male to HD15 female molded connectors for secure connections.
- Signal Integrity: Gold-plated connectors and gold-plated copper contacts ensure excellent conductivity and minimize signal loss.
- Shielding: Superior molded cables with foil-shielding provide maximum EMI/RFI protection, reducing interference.
- Standard Compliance: Per standard VGA specifications, Pin 9 is intentionally left open. This is a standard design and not a defect.
Setup and Installation
The Tripp Lite P510-006 VGA Monitor Extension Cable is designed for simple plug-and-play installation.
- Identify Ports: Locate the VGA output port on your computer or video source (typically a female HD15 port) and the VGA input port on your monitor or display device (typically a female HD15 port).
- Connect Existing Cable: If you are extending an existing VGA cable, connect the male end of your current VGA cable to the female end of the Tripp Lite P510-006 extension cable.
- Connect to Device: Connect the male end of the Tripp Lite P510-006 extension cable to the VGA input port on your monitor or display device.
- Secure Connections: Ensure all connections are firm. Many VGA connectors have thumbscrews; tighten these gently to secure the connection and prevent accidental disconnections.

Image: The Tripp Lite P510-006 VGA Monitor Extension Cable, showing the male and female HD15 connectors and the black cable coiled. This cable is used to extend the reach between a computer and a monitor.
Important Note on Resolution: This cable is optimized for VGA resolutions up to 640x480. Using it with higher resolution monitors may result in signal degradation or no display. For higher resolutions, please ensure you are using a compatible Tripp Lite P500-series cable.
Operating Instructions
Once the Tripp Lite P510-006 VGA Monitor Extension Cable is properly connected, no further operation is required from the cable itself. It functions as a passive extension for your video signal.
- Ensure your computer and monitor are powered on.
- Select the correct input source on your monitor if it has multiple input options.
- Verify display settings on your computer to match the monitor's capabilities.
Maintenance
To ensure the longevity and optimal performance of your Tripp Lite VGA Monitor Extension Cable, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the cable and connectors. Avoid using liquid cleaners or solvents, which can damage the cable's insulation or connector plating.
- Storage: When not in use, coil the cable loosely. Avoid sharp bends or kinks, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Always grasp the connector housing when plugging or unplugging the cable. Do not pull on the cable itself, as this can strain the internal connections and lead to damage.
- Inspection: Periodically inspect the cable and connectors for any signs of wear, fraying, or damage. If damage is observed, discontinue use and replace the cable.
Troubleshooting
If you encounter issues with your Tripp Lite VGA Monitor Extension Cable, consider the following troubleshooting steps:
| Problem | Possible Cause / Solution |
|---|---|
| No display on monitor. |
|
| Poor image quality (blurry, ghosting, color issues). |
|
| Cable does not fit into port. |
|
| Pin 9 is missing on the connector. | This is normal. Per standard VGA specifications, Pin 9 is intentionally left open and is not used for video signal transmission. This is not a defect. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Tripp Lite |
| Model Number | P510-006 |
| Cable Type | VGA |
| Connector Type | VGA (HD15) |
| Connector Gender | Male-to-Female |
| Length | 6 feet |
| Color | Black |
| Compatible Devices | Computer, Monitor (VGA-enabled) |
| Max Resolution Supported | 640x480 (VGA Standard) |
| Special Feature | Foil-shielding, Gold-plated connectors |
| Item Weight | 5.6 ounces |
| Product Dimensions (LxWxH) | 5.45 x 6.45 x 0.5 inches |
| RoHS Compliant | Yes |
Warranty and Support
Tripp Lite products are known for their reliability and quality. For specific warranty information regarding your P510-006 VGA Monitor Extension Cable, please refer to the warranty card included with your purchase or visit the official Tripp Lite website.
For technical support, product registration, or to view additional product documentation, please visit the Tripp Lite official website or contact their customer service department. You can find more information and contact details at the Tripp Lite Store on Amazon or their main corporate website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.