Kenwood KM800 Major Classic Stand Mixer

1. Introduction

Thank you for choosing the Kenwood KM800 Major Classic Stand Mixer. This appliance is designed to provide powerful and versatile assistance in your kitchen, making tasks like mixing, whisking, and kneading easier and more efficient. To ensure safe and optimal performance, please read this instruction manual thoroughly before using your mixer and retain it for future reference.

2. Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and/or injury to persons.

• Read all instructions before use.
• Do not immerse the motor unit, cord, or plug in water or other liquids.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils away from attachments during operation to prevent injury and/or damage to the mixer.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner.
• The use of attachments not recommended or sold by Kenwood may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces.
• Always ensure the head is fully lowered and locked before operating the mixer.
• Close supervision is necessary when any appliance is used by or near children.

3. Components and Accessories

Your Kenwood KM800 Major Classic Stand Mixer comes with essential components and versatile attachments to handle various culinary tasks.

This image displays the Kenwood KM800 Major Classic Stand Mixer in a grey finish, featuring its tilt-up head design and a stainless steel mixing bowl. Alongside the main unit, the three primary attachments are shown: the balloon whisk, the K-beater, and the dough hook, illustrating the versatility of the appliance.

• Main Unit: The motor housing with tilt-up head mechanism and speed control knob.
• Stainless Steel Mixing Bowl: Large capacity bowl for various ingredients.
• K-Beater: Ideal for making cakes, biscuits, pastry, icing, fillings, and mashed potatoes.
• Balloon Whisk: Perfect for whisking eggs, cream, batters, and soufflés.
• Dough Hook: Designed for kneading yeast mixtures for bread, pizza, and pasta.
• Spatula: For scraping down the sides of the bowl.

4. Setup

Follow these steps to set up your Kenwood KM800 Major Classic Stand Mixer for first use.

1. Unpacking: Carefully remove all packaging materials and ensure all parts are present. Dispose of packaging responsibly.
2. Cleaning Before First Use: Wash the mixing bowl, K-beater, balloon whisk, dough hook, and spatula in warm, soapy water. Rinse thoroughly and dry completely. Wipe the main unit with a damp cloth.
3. Placement: Place the mixer on a clean, dry, stable, and level surface, ensuring adequate ventilation around the unit.
4. Attaching the Bowl: Place the mixing bowl onto the base of the mixer and twist clockwise until it locks securely into place.
5. Attaching an Accessory:
   • Ensure the mixer is unplugged and the speed control is set to '0' (Off).
   • Press the head release lever (located on the side of the mixer) and lift the mixer head until it clicks into the raised position.
   • Align the chosen attachment (K-beater, whisk, or dough hook) with the attachment shaft. Push upwards and then twist to secure it.
   • Lower the mixer head by pressing the head release lever again and gently pushing the head down until it locks into place.

5. Operating Instructions

The Kenwood KM800 Major Classic Stand Mixer offers intuitive controls for various mixing needs.

1. Adding Ingredients: With the mixer head in the lowered position and an attachment secured, add your ingredients to the mixing bowl.
2. Powering On: Plug the mixer into a suitable electrical outlet.
3. Selecting Speed: Turn the speed control knob clockwise to the desired speed setting. Start with a low speed and gradually increase as needed to prevent splashing.
4. Mixing: Allow the mixer to operate until ingredients are thoroughly combined or the desired consistency is achieved.
5. Stopping Operation: Turn the speed control knob counter-clockwise back to '0' (Off).
6. Removing Ingredients/Attachment: Unplug the mixer. Press the head release lever and lift the mixer head. Carefully remove the attachment by twisting and pulling downwards. Scrape down the bowl with the spatula if necessary.

Usage Tips for Attachments:

• K-Beater: Use for medium to high speeds for creaming butter and sugar, mixing cake batters, or making pastry.
• Balloon Whisk: Use for high speeds for whipping cream, egg whites, or light batters. Ensure the bowl and whisk are clean and grease-free for best results.
• Dough Hook: Use for low speeds for kneading bread dough. Do not over-knead; typically 5-7 minutes is sufficient for most bread recipes.

6. Cleaning and Maintenance

Regular cleaning will ensure the longevity and optimal performance of your mixer.

• Always unplug the mixer from the power outlet before cleaning.
• Main Unit: Wipe the exterior of the motor unit with a damp cloth. Do not use abrasive cleaners or immerse the unit in water.
• Mixing Bowl and Attachments (K-beater, Whisk, Dough Hook, Spatula): These parts are generally dishwasher safe, but hand washing in warm, soapy water is recommended to prolong their life. Rinse thoroughly and dry immediately.
• Storage: Store the mixer in a clean, dry place. Ensure all parts are dry before storing.

7. Troubleshooting

If you encounter any issues with your Kenwood KM800 Major Classic Stand Mixer, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Kenwood customer support.

8. Specifications

9. Warranty and Support

Your Kenwood KM800 Major Classic Stand Mixer comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal household use.

For warranty claims, technical support, or spare parts, please refer to the contact information provided with your purchase documentation or visit the official Kenwood website for your region.

Please retain your proof of purchase for warranty purposes.