Haynes Repair Manual for Ford Granada Petrol (Sept 1977 - Feb 1985)

1. Introduction to Your Haynes Manual

This Haynes Service and Repair Manual provides comprehensive instructions for the Ford Granada Saloon and Estate models, specifically those manufactured between September 1977 and February 1985, covering vehicles up to 'B' registration. It details procedures for petrol engines, including the 2.0 litre (1993cc) 4-cylinder, and the 2.3 litre (2293cc) and 2.8 litre (2792cc) V6 engines.

The manual is designed to assist both the novice and experienced mechanic in performing maintenance, service, and repair tasks. All instructions are based on a complete stripdown and rebuild of the vehicle, ensuring accuracy and practicality for DIY enthusiasts.

Figure 1.1: Front cover of the Haynes Repair Manual for Ford Granada Petrol models. This image displays a red Ford Granada car with a cutaway view revealing its engine and chassis components, indicating the detailed nature of the manual's content. The cover also specifies the covered years (Sept 1977 to Feb 1985) and engine types (Petrol).

Figure 1.2: Back cover of the Haynes Repair Manual. This image illustrates the key features of the manual, including step-by-step instructions, a 'spanner rating' system for task difficulty, helpful 'Haynes Hints', and 'Tool Tips'. It also lists the main sections covered, such as Service, Fault Finding, MOT Test Checks, Filters and Fluids, Braking System, Fuel and Ignition Systems, Electrical System, Engine, Wiring Diagrams, and a Fully Indexed section.

Figure 1.3: An informational graphic detailing the benefits of using a Haynes manual. It emphasizes that each manual is based on a complete vehicle stripdown and rebuild, provides DIY-friendly techniques suitable for all skill levels, and includes a Fault Finder section to help diagnose issues efficiently.

Figure 1.4: The Contents page of the Haynes Repair Manual. This image provides an overview of the manual's structure, listing main sections such as 'Living with your Ford Granada', 'MOT Test Checks', 'Routine Maintenance', 'Repairs & Overhaul' (covering Engine, Transmission, Brakes, Electrical, Suspension, Body Equipment), 'Additional Information', 'Wiring Diagrams', and 'Reference'.

2. Safety Precautions

Always prioritize safety when working on your vehicle. Before beginning any procedure, ensure the vehicle is securely supported on level ground. Disconnect the battery's negative terminal to prevent accidental electrical discharge, especially when working on electrical systems.

• Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and sturdy footwear.
• Ensure adequate ventilation when working with chemicals, fuels, or exhaust fumes.
• Allow hot engine components to cool before handling.
• Use the correct tools for each task to prevent damage to components or injury.
• Refer to the manual's specific warnings and cautions throughout each section.

3. Routine Maintenance

Regular maintenance is crucial for the longevity and reliable operation of your Ford Granada. This section outlines essential routine checks and service procedures.

3.1. Engine Oil and Filter Change

Regularly changing the engine oil and filter is vital for engine health. Refer to the recommended service intervals in your vehicle's owner's handbook or the manual's maintenance schedule.

Figure 3.1: Examples of routine maintenance tasks. This image displays visual guides for draining the engine sump plug, changing the oil filter, and checking the fan belt tension. It also includes a diagram illustrating the vehicle's drivetrain components and a table listing recommended lubricants and fluids for various systems.

3.2. Recommended Lubricants and Fluids

Using the correct type and grade of lubricants and fluids is essential for optimal performance and to prevent damage. Consult the table below for specific recommendations.

*Note: See Supplement for alternative lubricant for N type transmission.

4. Engine and Associated Systems

This section covers detailed procedures for the engine, including removal, overhaul, and reinstallation. It provides step-by-step guidance for various engine components.

4.1. Engine Assembly and Component Checks

Accurate assembly and checking of engine components are critical for proper engine function. This includes fitting washers, positioning main bearing caps, checking crankshaft endfloat, and piston ring installation.

Figure 4.1: Detailed views of engine assembly procedures. This image shows various steps such as fitting thrust washers to the main bearing cap, positioning main bearing caps, tightening securing bolts, using feeler gauges to check crankshaft endfloat, positioning piston rings, lubricating pistons, and identifying piston marks.

4.2. Engine Component Specifications

Precise measurements and clearances are essential for engine rebuilds. Refer to the following specifications for camshaft, pistons, gudgeon pins, connecting rods, cylinder head, and valves.

Figure 4.2: A comprehensive table detailing engine component specifications. This includes critical dimensions and clearances for components such as camshaft journals, pistons, gudgeon pins, connecting rods, cylinder head, and valves, providing essential data for engine overhaul and repair.

4.3. Tightening Sequences and Assembly

Correct tightening sequences and assembly procedures are vital to prevent warping and ensure proper sealing of engine components.

Figure 4.3: Illustrations of engine assembly procedures. This image includes diagrams for the correct tightening sequences of cylinder head bolts and inlet manifold bolts. It also shows steps for inserting pushrods into the cylinder block, fitting oil splash shields, placing new inlet manifold gaskets, and assembling rocker shaft components.

5. Vehicle Systems Overview

This manual provides detailed information on various vehicle systems, enabling comprehensive repair and maintenance.

5.1. Transmission

Covers both manual and automatic transmission systems, including removal, inspection, repair, and reinstallation procedures. This section also addresses propeller shaft and rear axle maintenance.

5.2. Brakes

Detailed instructions for the braking system, including component inspection, replacement of pads and shoes, fluid bleeding, and overall system maintenance to ensure safe operation.

5.3. Electrical System

Provides guidance on diagnosing and repairing electrical faults, including wiring diagrams, component testing, and general electrical system maintenance.

5.4. Suspension and Steering

Covers the front and rear suspension components, steering gear, and associated linkages. Includes procedures for inspection, repair, and adjustment to maintain vehicle handling and ride quality.

5.5. Body Equipment

Addresses the maintenance and repair of bodywork and fittings, including interior and exterior components, to preserve the vehicle's structural integrity and appearance.

6. Fault Finding and Troubleshooting

This manual includes a dedicated fault-finding section to help diagnose common problems. It provides systematic approaches to identify the root cause of issues, saving time and effort.

6.1. MOT Test Checks

A specific section is included to guide users through checks required for the Ministry of Transport (MOT) test, helping to ensure the vehicle meets legal safety and environmental standards.

• Checks carried out from the driver's seat.
• Checks carried out with the vehicle on the ground.
• Checks carried out with the vehicle raised.
• Checks carried out on your vehicle's exhaust emission system.

7. Product Specifications

This section provides general information and specifications related to the Haynes Repair Manual itself.

• Publisher: J H Haynes & Co Ltd
• Publication Date: December 8, 2013
• Language: English
• ISBN-10: 0857337033
• ISBN-13: 978-0857337030
• Item Weight: 1.36 pounds
• Dimensions: 8.27 x 0.59 x 10.63 inches

The manual covers Ford Granada models with petrol engines, including special/limited editions, 2.0 litre (1993cc), 2.3 litre (2293cc), and 2.8 litre (2792cc) V6 engines. For information on Diesel engines, refer to book no. 1606.

8. Support and Additional Resources

For further assistance or inquiries regarding this manual, please contact the publisher, Haynes. Additional resources, including supplements for later models and wiring diagrams, are also available.

• Publisher: J H Haynes & Co Ltd
• Website: haynes.com (Example link, actual link not provided in data)

Always refer to the latest edition of the manual and any official service bulletins for the most up-to-date information.