artopex RC3 Reception Desk

INSTRUCTION MANUAL

Assembly Instructions

MODEL NO.: RC3 RECEPTION DESK

IMPORTANT NOTE:

• Place all parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials,including staples & packing straps before you start to assemble.
• Don’t tighten all screws/bolts until all completely assembled.
• Keep all hardware parts out of reach of children

Product Specifications

• Model No.: RC3 RECEPTION DESK
• Number of Pieces: 54 (Set), 54 (Pcs)

Product Usage Instructions

Assembly Steps:

1. Step 1:
   • Arrange parts A, B, C, D, E, F, G, H, I as indicated.
   • Use 44 pieces to complete this step.
2. Step 2:
   • Combine parts a and B.
   • Set up 6 sets with part b.
   • Use 2 pieces for this step.
3. Step 3:
   • Arrange parts a, b, c, d, e, f as shown.
4. Step 4:
   • Follow the instructions to assemble parts 7, 8, 9, 10.
5. Step 5: Complete the assembly according to the provided diagram.
6. Step 6: Assemble parts h, i, and follow the sequence for completion.
7. Step 7:
   • Finish assembly with parts h, B, i, H, C, I, A, k, BC, k, A, E.

Note:

Two people are required to assemble and move this model effectively.

Completed Assembly:

After following all steps, the assembly should be completed with parts j and l in place as per the diagram.

Frequently Asked Questions (FAQ)

Q: How many people are required for assembling the RC3 RECEPTION DESK?

A: Two people are required for assembling and moving this model.

Q: Are there any specific tools needed for assembly?

A: The assembly can be done using the provided parts without the need for additional tools.

Documents / Resources

artopex RC3 Reception Desk [pdf] Instruction Manual RC3, RC3 Reception Desk, Reception Desk, Desk

References

• User Manual