Aramox Push Button Start Stop System Instructions

Aramox logoPush Button Start Stop System
Instructions

WARNING

  • To ensure safety, do not remote start when the front hood is open.
  • Do not remote start when the car is repairing/maintenance/upgrade.
  • The product only works on a 12V Car.
    Do not use a 24V specification on the vehicle; it may cause damage to components or result in a fire.
  • Children and strangers are not allowed to use remote keys or phone apps, as the car door may be unlocked and the engine may be accidentally started, in case to accidents.
  • If an unusual event occurs, such as liquid spilling on the product, or the product smoking or emitting an unusual odor, please stop using it immediately and consult the dealer where you purchased it. Continuing to use the product before taking corrective measures may result in accidents, injuries, or fires.
  • Do not place the plastic bag of the package on your head, as this could result in serious injury or asphyxiation.
  • Do not use this product in other locations, as it may cause electric shocks or damage.

Introduction – Remote Start

Remote start function: usually only supports automatic gearbox cars.
remote start:

  1. remote start by product key.
  2. remote start by APP(If with 4g gsm module or Bluetooth).

Using the phone app or remote key to remotely start the engine
IT allows you to start the engine outside the vehicle by simply pressing the app command or button of product key you can set your car Air condition well, and let the car’s air conditioner start automatically when the car engine starts. You can start the car at home before you drive, which makes your car more comfortable when you’re driving in a hot summer or in a cold winter.
The APP is controlled by a smartphone, it with unlock/lock, and some car with window control/trunk control. This also make more convenient.
The APP can see the car condition on your smartphone, such as: the car door is locked or unlocked, the engine is started or off, and so on.
The APP function is upgraded, and more functions will be added.

Important Information

Do not start the engine in enclosed areas such as garages or indoor parking lots, as there may be a buildup of exhaust fumes, causing carbon monoxide poisoning and posing potential dangers.

Aramox Push Button Start Stop System - potential dangers

After remote starting, do not immediately inspect the engine as it may still be hot. Allow the engine to cool down to avoid burns or scalds.

Aramox Push Button Start Stop System - engine to cool down to avoid burns

Do not use remote start in areas where the vehicle cannot be seen clearly, as children, elderly people, or pets may be around the vehicle and could be accidentally injured.

Aramox Push Button Start Stop System - remote start in areas

If there are children or pets inside the vehicle, do not start the engine as the electrical components, such as gears, windows, and seats, may be accidentally activated, leading to injuries and harming others.

Aramox Push Button Start Stop System - children or pets inside

If there are dry leaves, paper, or other flammable materials and chemicals nearby, do not start the engine, as the hot exhaust pipe may ignite them and cause a fire.

Aramox Push Button Start Stop System - leaves, paper, or other flammable

The ideal conditions for remote starting the engine are a general environmental temperature of 30ºC or 10ºC or below.

Aramox Push Button Start Stop System - temperature

After parking, turn off devices such as the automatic wipers, automatic headlights, and audio system, as these devices may be damaged during extremely cold weather when remotely starting the engine. Check that all windows are closed and lock the doors after parking.

Aramox Push Button Start Stop System - windows are closed and lock the doors

Only use remote start when you intend to drive the vehicle to avoid overconsumption of engine fuel.

Aramox Push Button Start Stop System - remote start when you intend

Do not start the engine when the vehicle is covered by a sunshade, as the exhaust emissions from the tailpipe may cause a fire at high temperatures.

Aramox Push Button Start Stop System - start the engine when the vehicle

To ensure the safety of personnel and engines from injury, do not use remote start when the engine cover is open.

Aramox Push Button Start Stop System - engine cover is open

To ensure the safety of personnel and vehicles from injury, do not use remote start when the vehicle is being repaired or maintained.

Aramox Push Button Start Stop System - repaired or maintained

1. User Manual for Push Button Start Stop System:

  1. Engine Push Button Start Stop Function:
    Push the engine start: step on the brake, at the same time, push button 1 time.
    Push the engine off: engine on start condition, push the button 1 time. Few cars need to step on the brake, at the same time push the button 1 time.
    Note: some car no need to step on the foot brake, just push the button 1 time, it can turn off the car engine (for example, a new Mercedes-Benz car)
    If not, step on the foot brake, only push the button, it is: ACC-ON-OFF/ Or ON/ACC/OFF.
  2. PKE Keyless Entry Function(car door automatic unlock lock):
    After installing the system well, all antennas put better signal receive place. Start the car engine, close all doors well (front engine hood cover, back trunk cover, all closed well, window closed), bring all product keys beside you, and leave the car. The door will lock automatically when you approach the car, door will unlock automatically.
    When you stop the car engine, close the door, and do not press the key button to lock. If you press the remote key button to lock, when you approach the car, PKE unlock will not work; you need to press the remote key button to unlock. If you have pressed the remote key button, start the car engine again, and the PKE function will be active again.
    Note that: bring the remote key with you if you leave the car, there is a probability of the automatic lock if the remote key is inside the car.
  3. product key remote start stop function:
    after install:
    remote start: make sure all doors, windows, and trunk are locked well. Press product key: unlock 1 time, then long-press the lock button 3-5 seconds.
    remote off: on the condition of not opening the door, press the button lock 1 time. If you open the door, it can not be turned off via remote key. You need to open the door and push the engine button to stop the car engine. The remote start function only supports automatic transmission cars. If your car is manual transmission, it can not remote start.
    If you do not stop the car engine, the engine will shut off by itself after about 30 minutes.
  4. trunk control (only supports a few cars with trunk control function).
  5. window control(only supports a few cars with a window control function).
  6. For some Toyota cars, it locks with gear D and unlocks P(only supports a few cars).

Mobile Phone APP Control Function(optional for products with 4G GSM Module or Bluetooth), if you did not pay money to buy a 4 G GSM module, please ignore all mobile phone app control.

Main function:

  1. unlock/lock car door by APP.
  2. Start/stop the car engine by the app (Only supports automatic transmission (automatic gearbox) car).
  3. Window control by APP (only supports a few cars).
  4. Trunk control by APP(only supports a few cars).
  5. Air conditioning control(only supports a very few cars).
  6. some other function(APP may update in future)
  7. GPS location (usually only support China buyer)
    Note that: the engine starts by APP(make sure the door, window, engine hood cover, and trunk are all closed well), press the lock to lock the door well. After that, the press engine starts. Or it can not start successfully. The SIM card must fit well, sim card size must fit. When it is connected online, the signal of the GSM place must be yellow. If it is a grey color, that means it did not online.

Aramox Push Button Start Stop System - Figure 1Aramox Push Button Start Stop System - Air conditioner control

2. User Manual For remote start stop system (original car been with engine push button start stop function)
Push start function is an original car function, for remote start stop/keyless entry, it is the same way.

3. User Manual For Keyless entry system with sensor handle type product:
After installing the product well, start the car engine, bring all original keys beside you, close all doors well, and touch the sensor lock area handle to lock the car door. touch sensor unlock area to unlock the car door.
Note: Do not touch the unlock lock area at the same time.

For some cars with a trunk release function(only support a few cars): car in lock condition, press the trunk button 1 time, unlock, press 2 times, trunk open.
Example for benz (sensor area may be placed differently for differently car):

Aramox Push Button Start Stop System - trunk release function

4. User Manual For other small parts/panel frame/cover ect.
Just replace the small car part (panel frame/single part) with the new part is ok.
If any questions, welcome to contact the seller for help!

Aramox logo

Documents / Resources

PDF thumbnailPush Button Start Stop System
Instructions · Sc881d9de4e334be5a38e340d378f5027K, Push Button Start Stop System, Button Start Stop System, Start Stop System

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.