VEVOR Plastic Shredder Crusher 5.5HP/4.0KW Model 250 User Manual

1. الإعداد والتثبيت

Before operating the VEVOR Plastic Shredder Crusher, ensure proper setup and installation according to these guidelines.

1.1 توصيل الطاقة

This product operates on a 220V three-phase four-wire system. It does not come with a plug and requires professional wiring for use. Ensure all electrical connections comply with local codes and safety standards.

1.2 Machine Placement and Mobility

الوحدة مجهزة بـ أربع عجلات: two fixed front wheels and two rear 360-degree swivel casters. This design allows for easy movement and positioning of the machine. Place the shredder on a stable, level surface in a well-ventilated area.

2. تعليمات التشغيل

Follow these steps for safe and effective operation of your plastic shredder.

2.1 Material Loading and Crushing Capacity

The shredder features a 5.5HP (4.0KW) pure copper motor مع 1750 RPM motor speed و 8mm mesh size, providing a crushing capacity of شنومكس-شنومكس كجم / ساعة. It is designed to efficiently shred a wide range of materials including PC, PVC, ABS, PET, EPS, PU, HDPE, rubber, leaves, wood, and nylon. Use the convenient feed button for faster material loading and smoother feeding.

2.2 Blade System

The shredder is equipped with 8 SKD-11 alloy steel blades (6 rotating and 2 fixed). These blades are designed for high hardness and impact resistance, ensuring efficient crushing. The blades can be removed, polished, and reused when dull.

2.3 ميزات السلامة

The machine incorporates dual safety protection for secure operation:

• حماية من التحميل الزائد: Automatic shutdown in case of motor overload.
• Power Interlock Protection: Automatic power cutoff when the lid is opened during operation.

2.4 تقليل الضوضاء

The shredder features a double-layer soundproof design, consisting of double-layer steel plates and soundproofing cotton. This design minimizes noise and vibrations during operation. For optimal long-term ear protection, wearing earmuffs is highly recommended.

2.5 عروض الفيديو التوضيحية

3. الصيانة

تضمن الصيانة الدورية طول عمر آلة التقطيع وأدائها الأمثل.

3.1 العناية بالشفرة

ال SKD-11 blades are designed to be removed, polished, and reused. Regularly inspect blades for sharpness and damage. If dull, remove and sharpen them. Note: Avoid shredding glass or metal, as this may damage the blades and the machine.

3.2 التنظيف والتفتيش

The machine features manually removable lock nuts for quick disassembly, facilitating easy cleaning and regular maintenance. After each use, or as needed, clean out any accumulated material from the crushing chamber and the extended drawer. Ensure all safety mechanisms are free from debris and functioning correctly.

4. استكشاف الأخطاء وإصلاحها

This section provides guidance for common operational issues.

4.1 عدم بدء تشغيل الجهاز

• Ensure the power supply is correctly connected and active (220V three-phase).
• Check if the lid is securely closed. The power interlock protection prevents operation if the lid is open.
• Verify that the emergency stop button, if present, is not engaged.

4.2 Reduced Crushing Performance

• Inspect the blades for dullness or damage. Sharpen or replace as necessary.
• Ensure the material being fed is within the recommended types and sizes.
• Check for any blockages in the feed inlet or crushing chamber.

4.3 Machine Stops During Operation

• This may indicate activation of the حماية من التحميل الزائد. Turn off the machine, clear any excessive material, and allow the motor to cool before restarting.
• Check for any foreign objects (e.g., metal, glass) that may have entered the crushing chamber and caused a jam.

5. المواصفات

6. الضمان والدعم

تلتزم شركة VEVOR بتوفير منتجات عالية الجودة وتحقيق رضا العملاء.

• الإرجاعات: هذا المنتج مؤهل لـ إمكانية الإرجاع بسهولة خلال 30 يومًايرجى الرجوع إلى سياسة الإرجاع الخاصة بالبائع للحصول على تعليمات مفصلة.
• دعم العملاء: For any questions, technical assistance, or support needs, please contact VEVOR customer service.