فيليبس 929004621403

دليل مستخدم مصباح الأمان الشمسي من Philips

الموديل: 929004621403

مقدمة

Thank you for choosing the Philips Solar Security Light. This manual provides essential information for the safe and efficient operation of your solar-powered, wall-mounted flood light with PIR motion sensor. Please read these instructions carefully before installation and use, and retain them for future reference.

معلومات السلامة

  • تأكد من أن سطح التثبيت مستقر ويمكنه تحمل وزن وحدة الإضاءة.
  • لا تحاول تفكيك المنتج أو تعديله. قد يؤدي ذلك إلى إلغاء الضمان ويشكل خطرًا على السلامة.
  • حافظ على نظافة اللوحة الشمسية لضمان أداء شحن مثالي.
  • Avoid looking directly into the light source when it is active, as it may cause eye strain.
  • تخلص من المنتج ومكوناته بطريقة مسؤولة وفقًا للوائح المحلية في نهاية عمره الافتراضي.

محتويات الحزمة

تأكد من وجود كافة المكونات قبل التثبيت:

  • Philips Solar Security Light (1 unit)
  • جهاز التحكم عن بعد (وحدة واحدة)
  • حامل تثبيت (وحدة واحدة)
  • براغي (وحدتان)
  • Wall Plugs (2 units)

المنتج انتهىview

The Philips Solar Security Light is an outdoor, solar-powered flood light designed for enhanced security and illumination. It features a PIR motion sensor, high-brightness LEDs, and multiple lighting modes.

Philips Solar Security Light with three adjustable light heads, a solar panel, and a motion sensor.

الصورة: أكثر منview of the Philips Solar Security Light, highlighting its durable design with a solar panel, three LED light heads, and an integrated motion sensor.

المميزات الرئيسية:

  • عالية السطوع: 800 lumens with 6500K cool daylight color temperature.
  • شرطة التدخل السريع استشعار الحركة: Detects motion up to 49.2 feet with a 180-degree detection angle.
  • 3 وضع للإضاءة: Customizable illumination settings for various needs.
  • تعمل بالطاقة الشمسية: Equipped with an upgraded polycrystalline solar panel and a 2000 mAh high-capacity battery for efficient charging and extended use.
  • مقاومة للطقس: IP65 rated for resistance against heavy rain, humidity, and extreme temperatures.
  • جهاز التحكم عن بعد: Allows convenient adjustment of light modes without manual interaction.

الإعداد والتثبيت

The Philips Solar Security Light is designed for easy wall-mounted installation with no wiring required. It comes pre-assembled.

خطوات التثبيت:

  1. اختر الموقع: Select an outdoor location that receives direct sunlight for most of the day to ensure optimal charging of the solar panel. The light should be mounted on a wall.
  2. حدد نقاط الحفر: Hold the mounting bracket against the desired wall location and mark the positions for the two screws.
  3. ثقوب الحفر: Drill two holes at the marked points. Insert the wall plugs into the drilled holes.
  4. تثبيت قوس التثبيت: قم بتأمين دعامة التثبيت على الحائط باستخدام البراغي المتوفرة.
  5. قم بتثبيت الضوء: Slide the solar security light onto the mounting bracket until it clicks securely into place.
  6. ضبط رؤوس الإضاءة والمستشعر: Adjust the three light heads and the PIR motion sensor to cover the desired area. The motion sensor has an adjustable angle of 180 degrees.
Diagram showing the dimensions and installation steps for the Philips Solar Security Light.

Image: Visual guide for installing the Philips Solar Security Light, including dimensions and the accessories provided for wall mounting.

Diagram illustrating the 180-degree detection angle and 49.2 ft sensing range of the motion sensor.

Image: Illustration of the motion sensor's coverage, showing a 180-degree detection angle and a maximum sensing range of 49.2 feet.

تعليمات التشغيل

The Philips Solar Security Light features three distinct lighting modes, controllable via the included remote control.

أوضاع الإضاءة:

  1. وضع الاستشعار: The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness (800 lumens) for approximately 25 seconds, then turns off.
  2. الوضع الخافت: The light stays on continuously at a low brightness of 10% (80 lumens) throughout the night.
  3. وضع الخافت + المستشعر: The light stays on continuously at a very low brightness of 2-3% (16-24 lumens). When motion is detected, it brightens to 100% (800 lumens) for approximately 25 seconds, then returns to the dim state.
Diagram explaining the three lighting modes: Sensor mode, Dim mode, and Dim + Sensor mode with their respective brightness levels and triggers.

Image: Detailed explanation of the three operational modes, showing how the light behaves in Sensor, Dim, and Dim + Sensor modes based on motion detection and ambient light.

Use the remote control to switch between these modes as needed. Ensure the remote control has a clear line of sight to the light fixture for proper function.

صيانة

Regular maintenance ensures optimal performance and longevity of your Philips Solar Security Light.

  • تنظيف الألواح الشمسية: امسح اللوحة الشمسية بشكل دوري بقطعة قماش ناعمة.amp استخدم قطعة قماش لإزالة الغبار والأوساخ والشوائب. تضمن اللوحة الشمسية النظيفة أقصى امتصاص لأشعة الشمس وكفاءة شحن عالية.
  • تنظيف التركيبات: Clean the light fixture with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
  • بطارية: The integrated high-capacity 2000 mAh battery is designed for long-term use. No user maintenance or replacement is required for the battery.
  • مقاومة الطقس: The IP65 rating ensures the light is protected against dust and water jets. However, avoid submerging the unit in water.
Close-up of the high-quality solar panel on the Philips Solar Security Light, emphasizing its efficiency and long working time.

Image: Focus on the high-quality solar panel, illustrating its role in providing power for 8-10 hours of operation and its 1800mAh high-capacity battery.

استكشاف الأخطاء وإصلاحها

إذا واجهت مشكلات مع مصباح الأمان الشمسي Philips الخاص بك، فراجع المشكلات والحلول الشائعة التالية:

  • لا يضيء المصباح ليلاً:
    • Ensure the solar panel is receiving adequate direct sunlight during the day.
    • Check if the light is in the correct operating mode (e.g., not in 'off' state if the remote has an off button).
    • Verify that the remote control battery is functional.
  • الضوء خافت أو يبقى مضاءً لفترة قصيرة فقط:
    • The solar panel may not be fully charged. Ensure it is clean and exposed to direct sunlight for at least 6-8 hours.
    • Ambient temperature can affect battery performance; extreme cold may reduce operating time.
  • مستشعر الحركة لا يكتشف الحركة:
    • تأكد من أن عدسة المستشعر نظيفة وخالية من العوائق.
    • Verify the light is in a motion-activated mode (Sensor Mode or Dim + Sensor Mode).
    • Adjust the angle of the motion sensor to cover the desired detection area.

If problems persist, please contact Philips customer support for further assistance.

تحديد

ميزةمواصفة
ماركةفيليبس
نموذج929004621403
لونأسود
مادةالألومنيوم
شكل تركيبات الإضاءةمصباح
الاستخدام الداخلي والخارجيفي الهواء الطلق
مصدر الطاقةتعمل بالطاقة الشمسية
طريقة التحكمبعيد
مصدر الضوءقاد
عدد مصادر الضوء4
المجلدtage3.7 فولت تيار مستمر
لون فاتحأبيض بارد (6500 ك)
سطوع800 لومن (كحد أقصى)
مستوى مقاومة الماءIP65 مقاوم للماء
نوع التركيبحامل الحائط
سعة البطارية2000 مللي أمبير
زاوية الاستشعار180 درجة
مدى الاستشعارحتى 49.2 قدم
Comparison table of Philips solar security light specifications versus other brands.

Image: A comparison table highlighting key specifications of the Philips solar security light, such as brightness, lighting modes, battery capacity, and waterproof rating.

الضمان والدعم

للحصول على معلومات الضمان ودعم العملاء، يرجى الرجوع إلى موقع Philips الرسمي webالموقع أو تواصل مع قسم خدمة العملاء. احتفظ بإيصال الشراء كإثبات للشراء.

لمزيد من المساعدة، قم بزيارة: www.philips.com/support

© ٢٠٢٣ فيليبس. جميع الحقوق محفوظة.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.