دليل استخدام جهاز تنظيف السجاد هوفر باور سكراب ديلوكس

1. الإعداد

Before first use, ensure all components are present and assembled correctly. Refer to the included manual for detailed assembly instructions.

1.1 Filling the Clean Water and Solution Tanks

1. قم بإزالة خزان المياه النظيفة من أعلى الوحدة.
2. Unscrew the cap for the clean water compartment and fill with hot tap water (do not use boiling water).
3. Unscrew the cap for the solution compartment and fill with Hoover cleaning solution. Ensure the correct fill lines are observed for both water and solution.
4. Securely replace both caps and reattach the tank to the unit.

Image: The Hoover Power Scrub Deluxe Carpet Cleaner Machine, showcasing its design and dual tank system. This animated image provides a general overview of the product's appearance.

1.2 إرفاق الملحقات

The unit comes with various attachments for specialized cleaning tasks. To use them:

1. Locate the hose port on the front of the unit.
2. Lift the port cover and firmly insert the accessory hose until it clicks into place.
3. Attach the desired cleaning tool (e.g., upholstery tool, stair tool) to the end of the hose.

2. تعليمات التشغيل

اتبع هذه الخطوات لتنظيف السجاد بفعالية:

2.1 Powering On and Basic Cleaning

1. قم بتوصيل سلك الطاقة بمأخذ مؤرض.
2. Press the power button located at the base of the unit to turn it on.
3. Release the handle by pressing the foot pedal.
4. For washing, push the unit forward while pressing the solution trigger. Release the trigger and pull the unit backward to extract the dirty water. Repeat this process for thorough cleaning.
5. For rinsing, switch the dial on the clean water tank from 'Wash' to 'Rinse'. Push the unit forward without pressing the trigger to apply clean water, then pull backward to extract.

2.2 Using Handheld Attachments

For upholstery, stairs, or hard-to-reach areas:

1. Ensure the accessory hose and desired tool are securely attached (as per Section 1.2).
2. قم بتشغيل الوحدة.
3. Press the trigger on the handheld tool to dispense solution and scrub the area. Release the trigger and apply pressure to extract the dirty solution.

3. الصيانة

تضمن الصيانة الدورية الأداء الأمثل وطول عمر جهاز تنظيف السجاد الخاص بك.

3.1 تفريغ وتنظيف خزان المياه المتسخة

1. Once cleaning is complete or the dirty water tank is full, remove it from the unit.
2. Unlatch the tank cover and carefully pour out the dirty water.
3. اشطف الخزان جيدًا بالماء النظيف لإزالة أي بقايا.
4. اترك الخزان ليجف تماماً في الهواء قبل إعادة تجميعه.

3.2 تنظيف الفرش والفوهة

1. Detach the clear nozzle cover from the front of the unit.
2. Remove the SpinScrub brushes by pressing the release buttons and pulling them out.
3. Rinse the brushes and nozzle cover under running water to remove dirt and debris. Use a brush or cloth if necessary.
4. Ensure all parts are dry before reassembling them into the unit.

4. استكشاف الأخطاء وإصلاحها

• لا يوجد شفط: Check if the dirty water tank is properly seated and latched. Ensure the nozzle cover is securely attached. The dirty water tank might be full, requiring emptying.
• لا يوجد توزيع للمحلول: Verify that the clean water and solution tanks are filled and correctly installed. Check if the solution trigger is being pressed during forward passes. Ensure the 'Wash' setting is selected on the tank dial.
• الجهاز لا يعمل: Confirm the power cord is securely plugged into a working outlet. Check for tripped circuit breakers.
• أداء التنظيف الضعيف: Ensure brushes are clean and free of debris. Use the recommended Hoover cleaning solution. Perform multiple passes over heavily soiled areas.

5. المواصفات

6. الضمان والدعم

For warranty information, product registration, or technical support, please refer to the official Hoover webالموقع أو تواصل مع خدمة العملاء. احتفظ بإيصال الشراء كإثبات للشراء في حال وجود أي مطالبات بالضمان.

قم بزيارة متجر هوفر لمزيد من المنتجات والدعم.